Indeed, many suffer from the fact that some of the walls of the dwelling is not perfectly flat. For the same reason, there may be problems associated not only with aesthetic considerations. It is also important to understand that leveling the walls of plastering is not a good idea. This takes a lot of time and money, and the end result very rarely meets the requirements. It is the alignment of walls with gypsum plasterboard that will be the best option, which will not be very expensive, and the final result will pleasantly surprise you.

It is important to know that there are two ways to fix drywall sheets to the wall:

• fastening with a metal frame;
• gluing the plasterboard directly to the wall.

Obviously, the most reliable and popular way is to mount on the basis of a massive metal frame. However, many owners of this method is absolutely not suitable. It is important to understand that the frame itself has a thickness of at least 4 cm. Within a small room, this is too much, so it is very often used to glue the material to the surface.

The main features of the

frame attachment Before choosing to glue the drywall to the wall, you should have some information about another way of fixing the material. Immediately it should be understood that the whole process is quite long and difficult, so it is often the professionals who are engaged in it.

Preparation of walls for fastening the

material To create even a minimal layer for wall alignment, it is necessary to work the surface. It is best to lose old layers of plaster or wallpaper. All this takes up excess space, which can be profitable to use. Especially this applies to small apartments, where every centimeter is of enormous importance. It is desirable to apply a primer to the wall. Sometimes this action is not mandatory, but in such conditions the coating will last a little longer. Also, experts advise to treat the surface of the wall with an antiseptic. All because after the arrangement of the wall surface, we have lost access inside.

The process of creating the framework

The frame itself is easy to arrange. It is important that, in the final analysis, the design is as stable as possible and really strong, so that even significant impacts on it can not break the overall integrity. First, around the perimeter, the UD profile is mounted, which will become the basis for fixing the sheets of plasterboard. The profile itself is attached using dowels directly to the concrete wall. The edges of the profile must come out. On their basis the jumpers

will be fixed. Then the installation of CD profiles begins, already on which, in turn, sheets of plasterboard are fastened. It is important to do everything to ensure that all elements of the profiles are on the same level, otherwise a certain curvature of the surface can not be avoided. The first elements of the profiles should be installed on the wall itself, and the following - with an interval of 60 cm. Often special suspensions are used in this process, which give the overall structure of rigidity and stability. However, this is only in the case of creating a mass object.

Installation of drywall sheets

Fastening sheets to the construction is the most pleasant and extremely simple process. For him, we need 35 mm screws. The heads of the screws themselves should be slightly inadvertised so that they do not stand out on the future level surface. If certain sheets of material are slightly larger than the required dimensions, you should use a special knife-cutter for gypsum board.

Finishing and finishing the process

Finishing is the most important process. Practically all of it depends on the final quality and evenness of the surface. In places of seams a reinforcing mesh is attached, which will help to hide some disadvantages of the surface. Nowadays, other materials are also often used, which can provide additional surface protection. After the puttying, grind the surface. It is important not to overdo it. The layer of putty should not be more than 2 mm, otherwise there may be cracks, and sometimes even the material can be sprinkled.

Features of the bonded drywall

And indeed, to level the walls with plasterboard without a frame is much easier than with the classical method. As already mentioned, the arrangement of walls with plasterboard without a frame significantly saves space in the room, and this is a huge plus.

Basic operations for wall construction

1. First you should carefully work on the smoothness of the surface, which we will finish with plasterboard. In contrast to the carcass kind of leveling the walls, much depends on the wall itself.
2. It is very important to pre-coat the wall with a primer. This will improve the quality of the bonding properties of the material.
3. Before installing the surface, it is necessary to take care of the size of the drywall sheets. It is best to pre-trim the required amount to the optimum size.
4. Across the surface where the gypsum board installation will take place, drill the dowel holes. The number of holes can be different, it all depends on the area of ​​the wall. Screws will be screwed in such a way that all the hats are on the same level.
5. Decorating walls with plasterboard without a frame is not much different from the classic method. After arranging the sheets of plasterboard, we need to apply the putty.

Basics of fixing drywall to the

surface The fixing of the drywall is done by the back of the sheets. It is on this surface that the glue is applied. It is important to know that you need to apply glue pieces in 30 cm steps. Often, experts advise applying glue directly to the wall. Sometimes this simplifies the process. After applying the glue, the sheets are pressed against the dowels. Very often in this process, a rubber hammer is used, which helps to create an even surface.

It often happens that the wall is rather curved. To avoid trouble when walling gypsum plasterboard without a frame, it is necessary first to trim the surface of the wall in small strips, which will ensure the maximum flatness of the surface after the final manipulation.

There are also alternative ways to arrange a wall with plasterboard, but they are somewhat complicated, and in some cases they do not guarantee high quality.

Price issue and other features of the surface arrangement of plasterboard

Thanks to modern technologies, any method of wall construction with plasterboard will lead to success. For sure, many believe that the frame provides a higher reliability of the construction, in contrast to sticking drywall. In fact, everything is not so straightforward. If you carry out the finish with plasterboard without a frame as closely as possible, without losing a single detail, in the end we will get a chic result. Creating a skeleton is very often a difficult task, so in this situation, many mistakes and other unpleasant moments can occur. Very often it is the frame that is used to create some unusual elements of the interior and room, while gypsum board gluing is ideal for leveling the surface.

If we talk about price policy, then very often it all depends on the suppliers of materials and other serious factors. By itself, the arrangement of the wall with the help of framing will be much more expensive. However, it is worthwhile to understand that glue, intended for gluing drywall with the wall surface, also costs a lot. In addition, its number should be really large. Also much depends on what area of ​​the wall you need to finish with plasterboard. The material itself is inexpensive, but auxiliary tools and some details can not be cheap. If it is a question of the whole apartment it is better to address to wholesale points of sales where it will turn out not bad to save.