Types of hygienic shower in the toilet

Hygienic shower in the toilet - actual device in case the bathroom in your apartment is separate.

In this case, installing a hygienic shower will help you save time, and do not walk every time to the bathroom.

In addition, this device solves most of the problems associated with hygiene in the restroom.

A similar shower is a bidet analogue, but its installation and installation is much cheaper and easier, so you can do it yourself.

In the article you will learn about the varieties of this system, and also get a step-by-step instruction on the installation of the design, plus photos and video of the stages of the works that will make the whole process more visible.

Types of showers for the toilet

Any shower for the toilet differs somewhat from its "colleague" for the bathroom: it is smaller, and also equipped with a special shut-off valve that does not allow waterflow at a time when no one uses the shower.

It is activated by pressing it, and at the rest of the time it remains in the closed state.

The biggest drawback of this type of design is that water with a shower still often starts to drip, and can also leave stains and splashes on the wall, so cleaning and possibly repairing after installation of the structure may be needed more often - such possible consequencesyou need to consider before you purchase the system.

There are three types of hygiene shower for the toilet: built-in, wall-mounted or connected to a sink.

The most profitable and easy-to-create option - when the sink and shower are connected together.

In this case, the sink is equipped with a mixer, and a shut-off valve is installed, and the shower head is installed on the wall closest to the toilet.

If you install such a system, you will not have to worry about the fact that water with a shower can drip.

Use this shower in the same way as usual - you have to turn on the water, pick up a comfortable temperature.

Despite the convenience of such a system, if one significant minus - its installation is possible only in the combined bathrooms, where the sink is already installed.

Otherwise, the installation price will rise significantly, and you will need more space in the toilet to put the sink, but it is not always there.

The second option - a shower, which is installed on the wall.

In this case, the mixer and the stopcock are attached to the pipes emerging from the walls: on the one hand, the shower hose is installed on the mixer, and on the other hand - on the watering can, which is then mounted on the wall.

This version of the design is quite cheap, but not very attractive - as it looks, you can see in the photo.

In principle, this option is convenient and not suitable only for those people who may be embarrassed by the aesthetic side of the design.

In built-in shower types, the installation of the structure takes place behind the wall, so that only the panel for fastening protrudes from the outside.

This shower looks neat and aesthetically pleasing, but it is more difficult to make than all the other types.for this you need to remove the coating from the wall, etc.- make a full renovation of the bathroom.

As a result, a hose connection inside the wall, through which water enters, must be connected to the hose and the stick.

If you do not want to adjust the water every time, it is best to install a hygienic shower equipped with a thermostat.

In this case, you can once fix the temperature that suits you and in the future do not do it.

With the installation of a shower with a thermostat, you can also save on water, It will not be necessary to "lower" the water, waiting for it to become hot.

Such an addition can be installed to any type of shower - built-in or wall mounted.

Video:

Other, more expensive varieties of hygienic shower - lids and toilet-bidets. Installation and installation of such a structure is not too complicated, but their cost is much higher than for a conventional shower.

The bidet cover is installed directly on the toilet, and has various hygienic and additional functions, including even lighting.

It's convenient to use such a system, but it's impossible to do this with your own hands.it operates an electronic system.

Toilet bowl - also a convenient, but also an expensive treat. To save money, you can conduct the installation yourself, after you bought the device. Do it yourself, too, does not work out.

Creating a shower device

The complexity and cost of installing a hygiene shower depends on the type of device that you need.

Below you will learn how to make installation of different types of devices in your toilet, but before you start working, look at the auxiliary video for installing different types of systems.

One of the most popular types of hygiene shower is a device with a sink. If the sink in the bathroom is already there, then adding a system with a mixer will not be difficult.

Photo:

First of all, choose a mixer, it must be equipped with a button, or have a rotary water switch, so that they are comfortable to use.

Some models are equipped with a water switch on the watering can - this is also a valid option.

Finnish, Russian and German models have proved to be the best ones.then the shower will last for as long as possible.

If, in addition to hygienic needs, you want to solve some household issues, for example, watering plants, then choose a shower equipped with a hose and watering can.

The mixer itself and the stopcock on the sink is installed in the same way as the usual one and does not require any additional knowledge and skills.

If your bathroom is not equipped with a sink, you can install it - often it's easier than doing a hygiene shower of a different type.

The sink can be quite small - 15-20 cm, or angular, its height also depends on your desire.

Video:

If you decide to install a wall-mounted hygienic shower, then first determine which type of installation suits you - open or hidden.

The schematic and photo types of the device will be determined by you.

If you want to save time and money as much as possible, then you need an open type of installation.

In this case, the mixer and the stopcock will be installed on the wall, the hose with the watering can be connected to it, and the last step is to install the shower holder.

In addition to the parts themselves, you will need a gasket that will need to be located in the space between the watering can and the hose and between it and the mixer.

For a hidden installation method, it is necessary to make a niche in the wall in which it is necessary to lay the fences - they will ensure the flow of water( hot and cold) into the mixer, so that the shower comes with warm water.

After the shrouds are installed, a mixer and a stopcock should be installed in the recess and the finished device is closed with a finishing wall panel.

Video:

On it from the outside, you need to install a joystick lever and connect a hose equipped with a watering can.

In general, it is not difficult to assemble a system, although it is somewhat more expensive than an open method - the circuit and video will help you in this.

Equipment of other

systems If you decide to buy a toilet bowl, you should know that its installation and installation are similar to the usual toilet, but you will have to additionally bring water and put a mixer and a stopcock.

The water supply can be supplied in three different ways. In the first case, the pipe, which is responsible for the supply of cold water, is connected in turn to the ball valve and flexible hose.

With the second type of device, the mixer is connected to the pipes supplying cold and hot water, and as a result, the water of the already desired temperature comes from the nozzle built into the toilet bowl.

Finally, the water supply pipes can be connected to a thermostat, after which you just need to set the desired water temperature.

The lid-bidet for the toilet is not much harder to install. First you need to close the shut-off valve so that the water does not penetrate into the tank, and completely release it from the water.

Then you need to remove the hose, which is responsible for the supply of water in the tank, and also remove the toilet cover.

Then put the tee and reinstall the hose assembly, which must connect the tee with the toilet bowl.

Video:

It is necessary to install the bolt in the plug and base plate, and attach the resulting device to the toilet.

After this, the installation of the device - after installation, fix it with the bolts, which are installed in the holes of the toilet.

Bottom bolts are additionally fixed with seals and plastic washers. Also, you need to tighten the nuts.

The last step is to connect the entire system to the tee and turn the stopcock to resume the water supply.

Any way to install a hygiene shower is simple enough to make it yourself.

Therefore, the main problem is to choose the system that will be for you the optimal ratio of price and quality. Install it will not be difficult.