Sometimes it happens that the repair is already completed, but there are regrets that no floor heating has been done in some places. Or there is a need for an additional source of heat, and I do not want to overpay for the electricity consumed by fireplaces. In such cases, the infrared warm floor of Caleo comes to the rescue.
Warm floors Caleo is a special film with elements on it radiating in the infrared spectrum, the heat from them being much more pleasant for the body, and the heating of the room is more effective. Infrared rays easily pass the floor covering and heat directly objects in the room, rather than air, it heats up the already heated furniture and walls.
Such an action is akin to heating from the Sun, and therefore it is the most safe and customary for a person. Infrared floor has another interesting advantage - in the room where it works, the air is ionized. An excellent alternative to Chizhevsky chandelier and advanced models of air conditioners!
Such floors work on the electrical network, but, in comparison with traditional water and electrical analogues, have a number of advantages of the
- reliable and safe, there is no need to fear leaks and overloads of the mains,
- the room temperature is easily changed by the thermostat and the control unit,
- smallthickness of the heating element( less than 1 mm) allows you to install a warm floor under the existing flooring - laminate, carpet, linoleum,
- , even if the element of the warm floor is damaged, Only the damaged section will work, the rest will continue to work, the
- film, on which the elements are located - is resistant to moisture, heating to 110-130 degrees, is durable and strong, it will probably survive not one repair,
- the work of the infrared floor is absolutely noiseless, is not accompanied by vibration or other manifestations,
- oxygen in a room heated by an infra-red floor is not "burned", unlike most other heating systems, the
- has lower electromagnetic radiation than that of an ordinary oneAbel electrical floor and even most household appliances.
Technical details
The warm floors of Caleo are designed and manufactured in South Korea, where the room is traditionally heated by heating the floor. The composition of the elements of Caleo includes only a carbon polymer, a film of polyester, a silver mesh and a thin-conducting copper bus, that is nothing that emits toxic compounds. The system is connected to a network with a voltage of 220 V and consumes a maximum of 150 W / m².The width of one element is 50 cm, and the length varies depending on the delivery set. The film itself is heated to 60 degrees, which can not lead to spoilage of materials in contact with it.
Infra-red flooring assumes dry installation without the use of screed or glue. It is enough only to disassemble the floor covering, if it is already laid, spread the floor and collect it back. On the assurances of the manufacturer, all the work will take no more than 2 hours, and you can immediately use such a floor.
Solutions for all premises
With the Caleo warm floor, almost any room can be heated, as it is available in several versions:
- Caleo LINE is a minimal kit that includes only thermal film, contact clamps, wires and insulation. The total length is from 2 to 12 m, and the covering area is from 1 to 6 m.
- Caleo GRID - with a special anti-spark safety net for even greater reliability and safety. The coverage area is from 1,05 to 20 m, the length of the strips is from 2,1 to 40 m. The sets are produced in two power options - 150 and 220 W / m.
- Caleo GOLD is a unique warm floor with the effect of self-regulation, which makes it possible to save even more electricity.
All the kits are accompanied by the detailed instruction, and the guarantee for 15 years emphasizes that the manufacturer does not doubt the quality of its products.
