Many owners of suburban real estate, and most often, summer residents, for their needs, water is taken from the well. However, the water used for drinking or cooking should undergo additional cleaning, and today we will talk about how to clean water from a well in various ways.
The most common in such water is iron. Excessive concentration leads to turbidity of the water, and when used, for example, for washing things, leaves stains on them. The presence of this chemical element can immediately not be noticed. However, some time after the water is poured into the vessel, a characteristic precipitate can be found on its bottom.
Basic water purification methods
Reverse osmosis
This cleaning system is the most efficient and versatile. It allows you to get rid of several kinds of impurities. The principle of operation of such a device is based on the properties of the membrane, which is one of the elements of the filter. She misses only H2O molecules, keeping all the others. And the applied cross flow rinses the membrane itself, protecting it from clogging.
However, you need to consider that such filters are installed on a water pipe. Therefore, before you purchase the product, you need to know exactly the pressure of the water - this also determines the choice of a specific model.
reverse osmosis purification
Chlorination
This method is effective, but not acceptable, since water acquires a specific flavor.
Aeration
For this, the so-called "splashing" plants are used. They also apply anti-iron.
Methods of secondary purification were considered. However, there is also a primary one. It is necessary to pay attention to the quality of water, which comes directly from the well. Very often, the cause of its contamination is in siltation of the well. From the fact that it has a design( with a straight barrel or with a filter), depends on the method of cleaning.
In any case, you should determine the reason for "flooding".They can be:
- small water flow;
- incorrect installation of a deep pipe;
- does not match the type of installed pump;
- discrepancy between filter and pipe diameters.
Before proceeding with the solution of the issue of water purification from the water supply system, it is necessary to clean the well itself well, and then to be determined with a further cleaning procedure. There is such a recommendation - pour rubble on the bottom of the well. It will play the role of an additional filter.
