Good day! In your case, it is important to understand what kind of load will be connected in the change house. If this is lighting and any household appliance, then the maximum load will be 2-2.5 kW. In this case, you can choose an extension cord with a wire cross-section of 1.5 mm sq. It is able to withstand loads up to 16A, which is quite enough. In addition, the socket in the house to which you will connect the extension cord is also rated for 10 or 16A. Check this point too, so that there is no overload, you never know. There is most likely no grounding in the house, but it is better to choose an extension cord with a three-core wire, i.e. 3 * 1.5 should be specified. Also, do not save on an extension cord, buy not the cheapest one, check with a consultant which one is better. The build quality shows how good the internal performance is. In general, the best option is to make an extension cord with your own hands by buying a VVG cable of 10 meters, a Euro plug and an overhead socket (double or triple). In this case, it will be reliable and inexpensive in principle. Read more about assembling an extension cord here:
(0)I do not like
(0)
Can the ventilation system motor be connected via a starter instead of a frequency converter?
