Simple but effective ventilation in the apartment with his hands

Many people living in apartments and complaining about the increased humidity, odors and a headache from lack of air in the room, do not think that the reason why - in the failure of the ventilation system. According to the norms of human life, the air in the room where it is located, must be constantly updated.

If this does not happen, the problems begin - from misted windows Feel to lack of oxygen and poor health. If you are faced with such problems on a regular basis, it's time to start checking the ventilation system.

Check ventilation

Each apartment provides a ventilation system. Exhaust ducts are located in the kitchen and in the bathroom. If it is separated, the hood must be fitted with bathroom and toilet. It permeates the air in a natural way - through the windows. In old houses with wooden frames circulation occurs naturally - through the cracks and micropores in the wood. If you put plastic windows and clashed with the stuffiness - it means you have blocked the access of air.

Check if the thrust in the air ducts, very simple. To do this, take a sheet of paper, cut out of it a few strips and glue over the hole extraction. If the paper strip folded in the channel direction, is bent, and in another cause stuffiness. If the paper is hardly hesitates, try to open the windows wide open. If the paper remains stationary ventkanal cloggedAnd it takes its cleaning.

When the windows are open when there is the normal pull, you need to install the ventilation of their own hands.

Construction of ventilation in the apartment

Cleaning ventilation channels is better not to carry out independently. In an extreme case, you can try to clean the output channel of your apartment into a common pit ventilation - it is enough to take kitchen or toilet brush, to dismantle the grille, Yorshik attached to the handle of a mop (primotat possible) and try to unclog ventilation stroke.

If the blockage in the main well, refer to the management company, cooperate with other tenants above and below you.

If the channel is not blocked, it is necessary to enhance the inflow and outflow of air. For ventilation there are two ways:

• separate channel in the outer wall;
• vent valve on the window casement.

The second method of the least expensive. This work makes the majority of firms that put plastic windows. On the leaf milled minute recess, and on top is placed with the flap lever. In the closed position the slot is blocked. Slide the box, you open a narrow slit, and air rushes in from the street to the apartment.

Step by step guide of the supply channel arrangement

You will need hammer with a drill or crown, kitsupplyventilationvalve and screws for fixing it. Do the following:

Step 1. Perforator drilled a hole in the outer wall between the radiator and the sill. If the crown is not present, you can make a few holes in a circle, and the remnants of hollow-chisel attachment.

Step 2. Insert the resulting channel valve tube. On the outside of the nozzle to slide the grate, leaning out of the window.

Step 3. On the inner side fasten screws box, in which the filter is placed. On top of the box decorative cover.

If the outside air is too cold, you should think about purchasing a ready supply unit. The bladed fan are mounted, the filter and the spiral heating. Connect the mechanism to normal wiring through the switch machine.

The exhaust fan is installed directly into the opening of the ventilation duct. You can put on the fan in the kitchen, bathroom and toilet, to create a good draft. Shells of circular cross section of fans, they are inserted into the channel or rasklin or screwed on the screws. Top closed with a decorative grid. The fan in the bathroom is connected to the light switch. In the kitchen, you can provide a separate end switch, which you can include optional.

More sophisticated options include all sorts of sensors - temperature, humidity, and even carbon dioxide. The structure of such devices includes an electronic control unit with a step-down transformer in the circuit.