5 important tips on warming house + step by step guide to the preparation of walls insulation

Winter never comes without warning. And those who are ready to meet it will be worthy to feel comfortable in their "castle" all the cold months. On house warming need to think in the summer, and not only think but also to translate ideas into action. Rules of warming the house and important advice of professionals - on.

Tip 1 - Do not take that horrible

Only insulation with low thermal conductivity is able to protect against the cold your structure for the whole winter. The smaller the index - the better insulating propertiesAs well as the level of protection from extraneous noise. The higher the heat-shielding qualities of insulation, so, consequently, less expensive to be on home heating.

For warming the house professionals recommend use mineral or stone wool, Styrofoam, polyurethane foam or materials on the basis of basalt. But the choice of insulation depends not only on the thermal conductivity. You also need to take into account the region, its climatic features, construction type and thickness of the walls.

Tip 2 - Be technology

Each heating material has its own installation technology. If the insulation is put wrong, do not wait for the proper result for the winter.

There are some materials that combine several functions - for example:

• insulation;
• resistance to fire;
• protection from extraneous noise;
• UV resistance;
• moisture resistance;
• aesthetic appeal;
• mechanical stability.

But in most cases, if the material has a high coefficient of thermal conductivityIt is usually either afraid of water or destroyed by exposure to sunlight or well-lit. It is therefore very important when laying of a heater to take into account its characteristics and do not skimp on the purchase of auxiliary materials on the example of waterproofing membranes, profiles for the frame etc.

Tip 3 - Do not ignore the joints and cracks (step by step instructions prepare the walls)

At warming the house, pay attention to the surface of the walls before starting work. If they have a crack, they should be eliminated.

Brief step by step instructions on preparing the walls for insulation:

Step 1. Clean the surface of the walls of debris and dust.

Step 2. Examine the wall surface for cracks or slabs embedded joints, the bricks. If there is dirt - wash it off with water. This will improve the adhesion of adhesives for insulation to the wall.

Step 3. Deep cracks fill insulation or foam fragments.

Step 4. Small cracks and embedded deep damage to the plaster mask.

When the plaster has dried composition, it will be possible to start the process of insulating walls.

Tip 4 - The right window

Before 15% heat loss falls on the old window design, which, at times, even after all of their weatherization measures still I miss the cold.

Tip! The best option in the presence of old windows is to install a new insulated glass units.

If your windows are too worn out, and the installation of new designs until the budget is not provided, you can not replace all the windows at once, and only requiring immediate intervention. Typically, this window north-eastWho are more vulnerable to wind loads and effects of precipitation.

When choosing windows give preference to high-quality fittings, proven companies producing window profiles, and do not skimp on the number of windows. In some regions, the best option would be trehstekolnye windows. They are well protected from the cold room, besides practically impermeable to sound.

Tip 5 - Perform quality work

Picking up any work you need to do it efficiently. And insulation home is not an empty phrase. When installing the insulation material does not skimp on the extra hardware in the form of dowels, pay special attention to joints in the case of wall insulation foam or mineral wool. All stitches should be sealed with putty or sealing foam. When mount waterproofing membrane or diffuse, stack overlapping film and cement the joints construction tape.

Properly carried out insulation in the house - to save energy, the pledge of comfort and warmth, as well as the health of residents for years to come.