How to build a multi-house for cats with their own hands

Cat - is not only a "toy anti-stress" or connection with the houses, but additional care. To pet is not stripped wallpaper, I do not sleep in the closet and not the game is played, it is necessary to organize a comfort zone for him and personal space. Multifunctional house for a pet will solve several problems at once, and like unto the beast. Methods of making the cat's recreation area - on.

design options

Feline house can be executed in different versions. The simplest option - it is a simple box with sun beds inside, which is fixed an old T-shirt so that her mouth acts as the front.

Complex for cats, which also performs several functions - a complicated design. This option requires a lot more time to manufacture, but also result in this case will not take long.

Feline complex with a house, a stove bench, scratching posts and hanging toy

Multifunctional complex - ideal for organizing your pet. It can be made according to the interior so that it does not stand out from the design, but complements it. Compact complex does not take much space, if his plan wisely.

Functional areas of the complex:

scratching posts;
bench;
house;
Hanging toy.

To make such a house from scrap materials can be available in each storage room. perfect old furniture, remnants of pipes and rods, sticks, scraps of foam rubber, c / b rope, old children's toys, board, etc.. That the complex did not look sadly - will finish. Obtyanut all elements can be carpet remnantsWhich was used for the repair, pieces of fur or fabric.

Step-by-step instruction

Looking at the available materials by measuring their area, create a sketch with dimensions. So it will be easier to navigate in the preparation and assembly of construction elements.

Step 1. Of the available lumber cut out rectangular structural elements for the base of the complex, and couches house walls. On the two parts, designed to house walls, draw the same circumference.

Step 2. We carry out the cut. A circle in the design is solid, and the second will be the holes that need to be identified and cut.

Step 3. Upon receipt of walls outline the space rails mounting. To match point, the wall is better to unite and drill through the small holes.

Step 4. Prepare several strips of equal length. We clean them with sandpaper, so that they did not have rough edges.

Step 5. We connect the front and rear cabin wall by means of screws slats.

Step 6. We perform cutting of fabric for decoration. Cuts material should be a little more house walls.

Step 7. With hot melt papered wall house prepared cloth. Try not to use too toxic composition. If the house will be initially unpleasant smell, it is a strong likelihood that the cat is not accustomed to it.

Step 8. The front wall of the house in the hole cut tissue and accurately anchoring end portions.

Step 9. On-board base glue the foam to the place where the house will stand. foam size must exactly match the lodge area. Note the circumference of the mounting location for the riser to the base. It is more expedient to do this on the reverse side of the board.

Step 10. Paste over the base fabric. If sections of the material fall off, they must tuck. Furniture stapler can be used to increase the strength of fixing.

Step 11. Harvested house roof. According to the size of fiberboard sheet prepared for the house roof, tissue cut out with allowances and fining desired fragment. Fasten house to the ground, nailed roof.

Step 12. Scrap plastic tube attached to the base by setting the middle two wooden bar for stability. Fining tube bottom cloth, top platform to fasten couches.