How to make a computer table - 3 kinds of simple and convenient options + step by step guide

In the era of technology, perhaps, no one apartment is complete without a computer desk. What can we say - it's probably the most popular place in the house after the kitchen. Not very healthy to spend at the computer more time than we spend on outdoor activities, but it is the reality. Today let's talk more about how to make a computer desk with his hands to the workplace as comfortable and convenient.

Furniture stores boast a wide range of goods. However, not all models are suitable to us under the special design, the dimensions are not successful are forced to look for new and new options. In order not to waste time searching for a computer table, collect it yourself. Moreover, this product is much cheaper than than buying in certain firms.

Materials you will need:

• plywood sheets;
• MDF sheets;
• for filler openings;
• engines for future shelves;
• handles for shelves or hinges for the doors;
• paint decoration;
• brush or roller.

Let us consider in more detail three types of simple and convenient options with the manufacturer's instructions step by step.

Direct computer desk

The whole structure is usually composed of several prefabricated parts: the worktop itself, drawers, closet for additional computer equipment and a small file cabinet 2 drawers. This table will be convenient to transport or, if desired, rearrange to another place, more suitable for him.

1. It is necessary to carry out the layout and drill the necessary holes.
2. Putting a locker system unit and sides of the future product. If you are worried that the furniture will leave marks on the floor, you can use a small foot.
3. On the rear and side walls of the future product are screwed specialized furniture corners.
4. We put in the corners of the prepared shelf for the keyboard.
5. Also we can provide a special hole for all cables in the rear of the table had almost finished.

Corner Computer Desk

The hardest part, what you will encounter when working with the product - directly cutting, grinding and milling future countertops. However, if certain recommendations of the experts, and this process does not take much effort.

1. Mark up circuit with the required width and depth future pedestals. Do not forget to consider immediately the necessary boxes or stands for the system unit to your computer.
2. Once you cope with the manufacture of countertops, number the details - so you do not face unnecessary problems during assembly.
3. Collect boxes and all the necessary guidance for them.
4. In the same way it is collected and a section for, directly sistemnika.
5. Corner support post connect with side blocks.
6. Set almost a ready-made design for a future work area. Advise you to check whether you have done everything correctly, it was not necessary to observe distortions.
7. Insert all the drawers, check how they work. If they have something to hurt or thunder, it is possible distortions that need to be corrected.

Computer table for games - step by step guide

The most common computer desk is unfortunately not suitable for those who frequently play computer games. To the already familiar features you should consider speakers, keyboards, additional consoles, and even a second monitor. They are often very expensive in any hardware store, but you can build it yourself.

Making this table is no different from other types of computer assembly tables, which we have described above.

Step 1. When the drawing should be considered a special compartment for cables, which will be very much.

Step 2. The table top should be large enough to fit on it at once all the gadgets.

Step 3. Instead pedestals under the paper and writing utensils is better to leave a blank space to put them in the powerful speakers.

Step 4. Do not limit your design - such tables can be either straight or angled.

Use only your own drawings. So you get a table that meets your needs.