Complete instructions for glass doors - the choice to self-assembly

Glass doors can fit into any modern interior. Their installation is carried out in the room for any purpose, starting from the hallway and ending with a bathroom. In this article we will look at the main varieties of doors and how to install them.

A variety of door glass

Glass doors are presented in the form structures usually not enclosed by a frame, their classification is carried out by referring to the disclosure. The main types of glass doors.

• pendulum. Their fixation is carried out in two places: the top and bottom. The design, bottom, built a special door closer, which moves the blade to its original position.
• swing. doors project calculated opening at one side, so fixing by a pair of hinges.
• recoiling. Mounted in the interior of the room guides are mounted on the wall or ceiling surface. This is a great option for small rooms in which to save every centimeter of space.
• sliding. Such constructions are mounted in areas with high traffic of people. Most often, the sliding doors can be found in major shopping centers and stores. In such buildings are equipped with an automatic opening system, which is powered by the motion sensor installed above the entrance.
• radius. Doors equipped with radiused system can be either a frame or without it. Their installation is carried out on the fan duct inside the building and premises, distinguishing between separate areas. Installation of an automatic door opening / closing system. This function is possible thanks to the photocells, which are installed above the entrance.
• rotary. At first glance, such a mechanism reminiscent child carousel, which is fixed on the lower frame and the upper unit. A unique feature is the increased level of patronage from external mechanical influences. Modern production methods make it possible to equip a special device such mechanisms that will control the degree of rotation of the door leaf, put the necessary speed.

Installation of glass doors - step by step guide

Before you start the installation of interior doors, should undertake the following activities:

Step 1. The floor must be laid ready door structure so as to obtain a complete picture of the finished embodiment, located in an aperture (nut, the lateral and upper portion of the structure). According to the stage can not be ignored, since the remodel low-quality result is always much more difficult than to play it safe.

Mark all the main lintel so that they were equal to the opposite site of the door.

Step 2. Now you can begin to collect the door frame. A better option would be to work with the upper portion of the web. To eliminate unnecessary parts, you need to use a saw and a hacksaw.

Upper portions of the box are joined with each other, this is done by means of external clamping portions clamp. After this it is necessary to drill a hole the size of 2 mm. Now remove the clip and install the screws.

Step 3. The next step is to install the nut. To accomplish this step, portions of the material must be cut at right angles, to fix the resulting structure by screws.

Step 4. Then you can make a direct mounting of the glass enclosure in front of the reveal. To do this, you must purchase and install the dowels them every 35-45 cm. To avoid problems with the tilting structure is recommended to use the building level.

In order to maintain stability of the construction can be set a few small apertures wedges in the top and two opposite sides of the web.

Step 5. The next step is to do application of foam in the gap between the doorway and the carcass structure. Apply recommended dashed strokes with a gap of about 1 cm.

Until the foam is completely dry you can do installation of a lock mechanism and handles. The glass elements are usually erupt factory holes.

Step 6. The last stage - the installation of decorative inserts. Their attachment is carried out using construction nails or special studded designs are inserted into the slots.

Glass doors - the perfect solution for giving a modern dwelling species. Selection and installation of the construction will not take long if you follow the instructions above.