As a self-install the partition in a room, space for zoning

If the expansion of housing need - is not always possible to make an addition to the house, because it is too troublesome and costly. Much easier pereobustroit already existing space more ergonomic, highlighting the room space for an extra room or a cozy corner.

Zonirovat space is possible by means interior or finishing, but the most effective way is to install the septum. Consider options for zoning, types of partitions and a step by step installation instructions.

types of partitions

Partitions for space zoning can carry a purely decorative function or be fully functional.

For decorative resonators include:

• bars;
• column;
• shaped partition with arched structures;
• poluarki;
• shelving;
• transparent partitions with glass or a built-in aquarium, etc.

Decorative partitions set of different materials: metal, glass, drywall, stone, brick, wood and even plastic.

Functional partitions are partitions are complete with a doorway or interior doors. To build a solid structure could be used brick, plasterboard, concrete blocks or wall paneling. Partitions of plasterboard lining and installation imply carcass.

Material for the manufacture of partitions selected according to the style and peculiarities interior house and in particular - the floor. For example, if you want to install an optional partition in the frame house, it is better to use lightweight materials that there is no additional load on the pile foundation. In a brick or monolithic building partition can be built from bricks, laying the foundation beneath it.

The choice of design

To determine the preferences will help the design features of the house, floor type and purpose of use of the room.

For example, if you want to separate the sleeping area in the living room - it is better to use a thorough partition with a door and zoning kitchen with dining area and can be a conventional bar. Hide the eyes from external study in the living room can be figured using partitions, the aquarium or the rack and separate the living room from the hallway will translucent plastic or glass.

Where to begin

Consider the installation complete with interior walls of plasterboard door. You should start by making a sketch and prepare all necessary.

Materials required GCR wall, interior doors, door frames, trim and final assembly bracket. Also needed is a material for the frame (wooden slats or metal profile), hardware, soundproof materials, foam, reinforcing tape perfugol, plasters and decorative material for finish.

Tool for the job

• level and a plumb;
• roulette and square;
• pencil and otbivochnogo thread;
• punch;
• screwdriver;
• gun foam;
• containers for plaster;
• spatulas.

Depending on the type of decorative finishes may require a roller or brush.

Installation of partitions - step by step guide

If you are doing this work for the first time, better even for the simplest design to make a sketch of dimensions. Such impromptu project will accurately calculate the required amount of materials and plan milestones.

Step 1. Preparing the space layout. Free the place where the planned installation of partitions, providing access to it for 1m from each side. At the location indicated perform markup - repulse a straight line on the floor, walls and ceiling.

Step 2. frame assembly. The perimeter walls of the future guide profile fastened pre paste over the rack in the places of contact with the surface of sound insulating tape. In accordance with the level and the plumb line of rack mount and bridges, in the right place leaving the door portal.

Step 3. Installation of drywall. With the help of the screwdriver to sheathe one side of the plasterboard wall. If the wall is necessary to hide the electrical wiring, this point should be provided at the stage of the frame assembly.

Step 4. Soundproofing. On the opposite side of the wall in the resulting cell laid sound insulation material, plasterboard partition sutured.

Step 5. Installation of interior doors. Install interior doors. If you are not confident in their abilities - it is better to invite a specialist.

Step 6. Decorative trim. Sizing GCR joints reinforcing tape, causes the surface of the filler. When the composition hardens - fining septum wallpaper or paint.

At the final stage will need to beat cashing for doors, install sockets and switches, if any, to mount the plinth. Ready to go after the partition is full pour polyurethane foam and fabric.