Cellar of plastic: a good solution for food storage

Traditionally used as a cellar for storage of vegetables, fruits and various conservation. Cellar made of plastic, which is also called a caisson, is an interesting alternative to the traditional dug in the ground storage and has a number of characteristics. In addition, plastic has the features cellar installation, which also should be considered. Finished model repositories may vary in size and price.

Advantages and disadvantages of plastic cellar

If you do not have time or opportunity to equip yourself for storage in the suburban area of ​​products, a great solution would be the purchase of finished plastic cellar. You can buy it directly from the manufacturer or through intermediaries, and the product itself can boast the following advantages:

• on plastic cellars accommodation for questioning by the manufacturer is not influenced by such factors as the type of soil, groundwater level, the degree of freezing of the soil and other parameters that may significantly hamper the construction of their traditional cellar hands;

• equally easy to install design, both in the open space and a residential or business building;
• plastic caisson cellar to tolerate adverse environmental effects, such as changes in temperature, humidity and so forth. In addition the presence of the equipped correct ventilation quality food storage in a cellar will be much higher than in the conventional;
• when buying plastic cellar Tingard or model you eliminate the need for a large amount of work. For example, it does not require additional finishing walls and floor, insulation structures, etc .;
• ready cellar of plastic does not absorb odors, protects food from insects, rodents and mold. Thus it is very easy to clean plastic wall of the structure, in contrast to the brick or concrete;
• with proper care and proper use, plastic construction will last about 50 years, and this is a very respectable time for the cellar.

However, judging by the reviews, new cellars are not without drawbacks. The main one - the high cost. The construction of their own hands from simpler materials will cost 50% cheaper, but it will take much more time, so in this case we have to choose, what is more important - time or finances.

The second significant drawback plastic storage - is its typical dimensions. Choosing ready cellar, you will be able to buy one of a few standard options, and the possibility of increasing the volume of construction does not provide storage. Of course, it is always possible to purchase and install several adjacent structures, but it is much more expensive than the construction of a large warehouse.

Despite the relatively high price of the cellars of plastic, they are very popular and are mounted in areas of various types.

Note!There is an opinion that can be used without problems ready cellar for high groundwater. In fact, when the water level in the soil, plastic cellar can squeeze out of the ground. Therefore, in this case, better to give preference to the traditional store or secure the plastic in a special way.

Cellar in the country under the key: price models and selection parameters

Price plastic cellar to give depends on parameters such as its size and volume. For example, the cylindrical design capacity of 3.5 cubic meters will cost about 60-80 thousand. rubles, but the cellar with a capacity of 9 cubic meters - 150 thousand. A large rectangular cellar with a volume of 16 cubic meters. It will cost about 200-250 thousand. rubles. Here it is necessary to understand that the price depends on the manufacturer, and the price may include also the installation work. Ordering a finished version soon with the installation, you will significantly save their time and effort.

Also, the price of the plastic of the box to the cellar and the container depends on the quality of the materials from which it is made. It is in this setting should first pay attention to when buying. If you purchase a store directly from the manufacturer, then to him must be accompanied by quality certificates and documents showing that the use is absolutely cellar safely. The same documents should provide an intermediary in the sale of plastic cellar. Buy such a structure would have a high price, so that should not be neglected given moment.

The second important thing to which you want to look for when buying a design, it is the ventilation system. It should be a series of pipes and openings, which can be modified according to the operating nuances. Most ready-made plastic cellars, which is supposed to store fresh food, will have to make a forced ventilation system, as built can not cope with the moisture released.

When buying a ready-cellar for questioning necessarily need to clarify whether the company is engaged in installing the product provider. This is very important, as the price of the finished cellar made of plastic can be much higher if it includes and installation. Set design with their own hands is not too difficult, but it takes you longer than in the case where this would be handled by experts.

Installation of plastic cellar: the price of work and self-installation

If you order the construction of turnkey cellars, prices can vary within a wide range. Everything depends on the complexity of installation, storage size and the need for additional work. Usually the price of the plastic mounting cellar for questioning by the manufacturer starts from 30 thousand. rubles, while setting large cellars volume of 16 m³ cost approximately 150 thousand. rubles.

Additional work referred ladder unit in the cellar wall insulation or organization retraction groundwater system. Not to order wall insulation after installation, you can buy a cellar of plastic with insulation, it will cost a bit cheaper.

If you decide to save money and become self-install, then this you will need to perform the work described below.

Excavation. This can be done manually or by means of specialized equipment, such as an excavator. Foundation pit should be a little more than the finished product. If as a result of the high water table at the bottom of the pit begins to accumulate water, then this problem can be decide dug in its center hole to a depth of 0.5 m. The water will drain into the pit, and you can safely proceed.

Concreting of the base. Installation cellar seamless plastic bottom can be filled with concrete, and it is possible to establish a reinforced plate. This is to align the base and also to protect it from moisture. Set slab also have to use the specialized equipment, such as a winch or crane.

For additional reliability concrete foundation is set on a sand bed 8-10 cm thick, over which the roofing material can be covered or pour a layer of bitumen. This is done with the aim of further waterproofing and provides good protection for the cellar floor on ground water.

Installation design and its fixing. Continuing the installation, plastic cellar must be secured on the basis of using a special sling. Under the bottom of the caisson cellar set, which may be plastic or metal. The caisson cellar body is also fixed in a way that is provided by the product manufacturer.

Filling of the cellar. The construction is filled with soil, and a mixture of sand and cement. Layer of soil around the cellar should be thoroughly compacted.

If in your area the ground water too close to the surface, it is recommended to do concrete floor inside the cellar, and when a dwelling house under construction concrete wall must excavation. This is done to reduce the ground pressure on the warehouse wall, which can lead to premature deformation.

Useful advice!If you plan to install turnkey cellars,under the house or other building, then it should be done during the construction phase, when the state of the structure makes it possible to carry a plastic container inside.

Installation of plastic cellar with their hands The advantage is that you essentially save funds, as well as an opportunity to establish the design at any time and in any place. But here it is necessary to understand that improper installation can lead to disastrous consequences. For example, at a high groundwater level need to design the base further reinforce and strengthen the concrete, so that it becomes possible heavy. Otherwise there is a risk that the container is simply pressed out.

In addition, if desired, can increase the insulating characteristics of the cellar for storing vegetables. Buy insulation materials are available in any specialty store, and their installation is the same as in any other insulation constructions. Even if you buy a cellar made of fiberglass, which is characterized by high thermal insulation performance, thermal insulation may still be needed.

Tingard cellar, Triton and other popular brands

There are several popular manufacturers of plastic designs that are in great demand in the domestic market. For instance, cellars of polypropylene from the company Triton. They are manufactured by extrusion welding technology, are of high quality, but high enough price. Seamless plastic cellars from the company may be the following types:

• semi-underground - with the protruding part of the ground;
• completely underground;
• drilling;
• ground;
• glacial.

Plastic Triton cellar also characterized by the fact that they can easily carry high humidity, exposure to low temperatures and other adverse environmental influences. On the market there are many models that differ in size, shape and number of other characteristics. The kit may include electrical wiring, and various optional accessories.

The second popular manufacturer of containers and caissons for cellars, buy you can through the Internet or directly from the manufacturer - is a trademark Tingard. Constructions of this company are made by rotational molding technology and are more expensive than the previous company. When buying a seamless plastic cellar Tingard you get a wide range of design dimensions, as well as a high level of quality and reliability.

According to reviews, Tingard cellar is one of the most popular among home buyers and, in together with the container itself is usually a folding metal ladder, wooden shelves, plain or insulated Luke and the lamp for lighting.

Price Tingard cellar plastic can vary from 100 to 250 thousand. rubles, depending on the amount of storage. If you order additional work, such as installation of the cellar, the price will be much higher.

Among all brands of plastic storage products are distinguished for Titan storage. Firstly, it is plastic cellar with a side entrance. This is very handy if you need not underground and above-ground or semi-underground basement. Second, the company produces various forms of storage and volume, are well suited for all needs. This cellar can be enlarged or insulated hatch, temperature and humidity sensors. The latter is especially important for wine cellars or storage, products which require a special temperature conditions.

Useful advice!When choosing a plastic storage brand for suburban area, pay attention to reviews of the owners of plastic cellarsfrom that of the company, the products that you intend to purchase.

In addition to these brands, there are also plastic cellar Knight domestic production. They are characterized by a relatively low cost with good performance. Our devices have located the top hatch shelves inside made of plastic.

Cellar of plastic: Pros and Cons

If we consider the features of this structure compared with a conventional basement, it becomes clear that the main parameter by which plastic cellars are very popular, it saves time to build. In addition, this cellar is usually tight, bundled with it has stairs and shelves, so that the number of required you to work is reduced to a minimum. If we look at a photo of a plastic or semi-underground cellar, ground type, it becomes clear that the external finishing works it is also not necessary.

On the other hand, plastic construction is much higher than even the most expensive option of the basement, made with his own hands. In addition, you may not wish to increase the storage capacity, make it deeper or wider. Installation of plastic caisson is also associated with certain nuances. Although the number and complexity of the excavation in this case is less than in self-regeneration of the cellar: install design will use the specialized construction equipment, since it is placed in the pit immediately assembled.

If you are planning to make a cellar under the house with the already finished construction, the version with plastic cellar will be difficult to realize. In order to put the bulk container under the floor of the finished structure, you need to disassemble part of the walls or the roof, and this is due to the additional complexity and cost.

Many buyers say these factors "for" how easy to use and no need for maintenance. Indeed, the acquisition of the plastic cellar from a reputable manufacturer you do not need additionally produce shelves, spending time on arrangement and holding an electric ventilation lighting. Design can begin to use immediately after installation. A plastic walls do not have to regularly zalatyvat, cleaned of mold and repair - even without the care they will last for several decades.

From all this it can be concluded that the main drawback of the plastic basement - is its price. All other features are at a high level and allow you to use a repository with greater comfort.