Leveling the floor self-leveling compounds - the fast and reliable way to get perfectly smooth floor
- quick-mix - resorted to the use of such mixtures when the repair work is limited. Dry for two to three hours, however, be used as the basis for floor covering is recommended no earlier than two days. They need extra reinforcing interlayer.
Often, to produce a desired result in stages using several types of self-leveling mixtures.
Useful advice!To ensure the quality and properties of building mixtures, purchase them only from reputable, well-established, the manufacturer.
Polymeric liquid floors have a surface strength and durability
floor leveling technology is self-leveling compounds
To self-leveling floor-filling mixture gave the desired result, is of fundamental importance the correct selection of the dry mixture. For different types of surfaces subject to the equalization, as well as depending on the condition of these surfaces, using different technology.
Leveling the floor with their hands self-leveling mixture can vary from 1 to 14 days. On the basis of fast-drying the mixture can be laid topcoat after only a few hours. However, the properties of these mixtures are not being used for large-scale renovations.
Tools for casting the floor with their hands
the floor with their hands pouring technology provides for special tools, without the help of which it is impossible to achieve the desired alignment:
- a mixing dry mixture - choose the volume capacity, which allows for one time use of the bag 25 kg of the mixture;
- Drill hammer or beater-mixer - since quick solutions requires high-quality and rapid flooding;
- notched trowel (up to 100 cm wide) - showed that the mixture of their functions, it is necessary to unroll evenly and thickly. The teeth on the size must match the thickness of the layer;
Construction Law - used by pouring beacons ties
Preparatory work
The technology works on the floor with their hands pouring self-leveling solutions requires careful preparation of the base. There shall be no cracks in the base or fistula, which possibly leaking liquid mixture. All defects previously sealed with filler or covered with rough screed.
After treatment with base, any debris is removed, remnants of the old coating, as even the slightest excess can weaken adhesion inclusion mixture with a base substrate. Subsequently, this can lead to cracking self-leveling floor. When the base is cleaned of debris, it must be primed. In the case of rapid absorption of the primer composition of the procedure is repeated.
Priming - an important process after its application leveling mixture has a good grip and lay down a uniform layer.
Priming - an important process after its application leveling blend has good adhesion and uniform layer lies
Cooking your own hands the solution of the dry self-leveling compounds for floors
Acquiring self-leveling floor mix, bother to read the instructions, which shows the preparation of solutions required proportions. Follow the instructions as excessive liquid mixture easier to spread and leveled, but it loses its declared quality. The filler screed may cause cracks and chipped.
It is also important to observe the sequence of preparation of the solution. If you pour the dry mix into a container and then add the water, to achieve a smooth consistency without lumps, it will be difficult in it. Proper technique consists in the fact that the dry mixture is poured into water, and not vice versa. Stir be carefully considering the fact that the fluidity of a solution is stored for about 30 minutes. After the screed thickens, it becomes unfit for pouring.
The solution was self-leveling mix must have a homogeneous consistency
Consumption of dry mix for pouring the floor is determined depending on the thickness, the type and mixture of the basic framework structure (presence of drops, bumps, etc.) to which the mixture is poured. Consumption mixture to fill a square of 1 mm thickness is about 0.5 kg. To reduce the flow mixture can be applied to the underlying layer by adding to the mixture of quartz sand. Such a layer will provide extra alignment and greatly reduce the consumption of a self-leveling mix.
Useful advice!For significant (1.5-2 times) saving consumption dry self leveling mixture is used as a filler quartz sand screed. This filler does not affect the strength characteristics of the self-leveling floor.
In addition, to reduce the flow of the basic mixture, can be used when laying the floor polymeric compositions (e.g., impregnation with polyurethane), which are more economical.
The cement mixture for rough leveling floor screed
floor-filling way to self-leveling mixture with your hands, video examples of works
Getting floor filling, it is recommended to get acquainted with the advice of professionals for device self-leveling floor, view video information on relevant topics. Self-leveling floor mixture easier to pour, when the process involves multiple parties: for mixing, pouring and leveling screed.
Related article:
Self-leveling floor with their hands. Video and description of the technology. A set of tools, materials selection principles, important information for beginners.
Capacity with a solution of turning in the desired location and with a spatula is rolled out on the ground. To avoid coating defects need to remove any air bubbles with a spiked roller.
The drying time of the screed floor depends on the choice of composition of the mixture, its thickness and the conditions of work. It is advisable not to cool and not overheat the finished surface. After a specified time in the instructions self-leveling floor ready for flooring unit.
For clarity, a look at a selection of video self-leveling floor with their hands.
Technology wooden floor leveling self-leveling compounds
To perform work on leveling wooden floor with their hands, you must take into account some special features. The technology is similar to pouring concrete base, but using a specific type of mixture. Such mixtures contain in their composition the polymers and fibrous additives (glass fiber). Thanks to them provided sufficient adhesion to the wooden floor surface and no cracking.
Acquiring self-leveling mixture for leveling wooden floors, make sure that its composition is suitable for filling wooden surfaces
Useful advice!Acquiring self-leveling mixture for leveling wooden floor with their hands, pay attention to the manufacturer's mark, which indicates that the composition can be used to fill wooden floors.
Preparation of wooden floors to equalize includes strengthening flex boards, removing old paint, acrylic terminations slots, grinding of irregularities and breaking away the elements. After this dust and debris is removed and a wooden base thoroughly primed in two layers, which further improve adhesion to a self-leveling screed and prevent rotting of wooden framework.
Studded shoe attachments let you move through flooded screed without leaving traces
Next, a solution of their own hands and self-leveling mixture is made filling the wooden floor. In this process, it is useful to the involvement of several people - one mixing solution, and the second - distributes the base, third - leveled and removes air. Once leveling the mixture in the wooden floors dry out - can proceed to the finish paving.
For example, in the Internet you can find video instructions fill wood floor self-leveling mixture.
To date, the floor leveling self-leveling screed is fast, simple, though not the cheapest way.
