Buck shower heated: the presence of warm water for a relaxing holiday

During the summer, the townspeople go to the garden, where water under the open sky procedures remain an integral part of the holiday. Buck shower heated - the best solution in cloudy weather when sunlight is insufficient to warm the water in the tanks. A simple device to quickly bring to the desired temperature of water supply. The right choice of a heated vessel will solve the problems in the summer and off-season, when it is "busy season" in the garden plots.

How doestub shower heated with thermostat

Capacity for water heating in the conditions, when bathing in the open air does not depend on the sun, making truckers life more comfortable. Compliance with basic hygiene conditions will no longer be tied to the clear weather. Suburban shower tank heated optionally include a grid in hot weather: capacity at high ambient temperature warms naturally. But even in cooler or rainy days makes no sense to indulge in swimming, when you can make it quite acceptable, selecting the appropriate tank.

Devices constructively have a lot in common, but differ on such parameters:

• volume capacity (in the range 25-200 l);
• Interior fittings;
• color metal, plastics;
• automatic regulation system of the heating process;
• casing material;
• insulation (storage type system to maintain the temperature).

The water temperature in the tank is easily maintained by a thermostat, resuming the heating process when it drops to a critical point. This incurs additional costs in terms of paying for electricity, but it is convenient for families with children. It is not known when the warm water again need a summer shower. When the sun sets over the horizon, you can still use the tank with warm water, if in a homemade box is supplied with lighting.

Outside the city likely to have problems with water supply. Tank summer shower heated automatically saves truckers from all sorts of inconveniences with hygiene procedures.

Room for washing under a summer shower has a lot to do with the capital bath:

• the frame and the wall of the booth (for visual isolation and protection from wind bathing people);
• metal or plastic tank shower heated;
• water supplying system directly to the tank, and from it - in water distributor (perforated funnel);
• a bottom grille and a sump for collecting water used for the gutter at its diversion drainage or irrigation system tree.

Itself or stall shower box made from the most suitable material such as wood, concrete blocks, plastic or slate on the frame. Top should be overlap, but if you plan to heat the tank sunlight, it bring to the roof. Alternatively, it can be placed under the glass plate (instead of the roof) to penetrate under it sunlight. Be sure to allow access to the tank for the upcoming clean (enough 1 times per season).

Note! Bucky eventually need to be cleaned from scale, dirt and sediment microflora, resulting from the "flowering" of water.

Monitor the water temperature helps sensor switch or thermostat. They are absent from cheap barrels shower heated. If desired, you can make a shower into two cabins, with separate entrances from different sides. This is possible if in the shower installed sufficient capacity. For a large family it makes sense to place two or one tank of 200 liters.

Choosing tank shower: plastic or metal

Before you buy a tank for the soul, it is recommended to get acquainted with the classification of vessels and their species. They come in both vertical and horizontal, it is important to consider when installing on an existing holiday's booth.

Methods for heating the water in the tank:

• from centralized water supply systems;
• from sunlight - thanks dark metal basis;
• by local heating systems;
• the electric heating element.

Important!The structural differences is important to understand, because the consultants did not always demonstrate competence when it comes to the tanks in the shower to give.

In trading rooms and catalogs often available capacity of 2 types:

• plastic vessels;
• metal tanks for heating and shower thermostat.

Plastic is cheaper, capacity will last at least 10 years, provided a competent service. Before the onset of the harsh winter, they can be removed. Metal containers last longer, but take more heat to the body on heating.

In general, tanks are characterized by:

• big variability in shape, material and size;
• long service life;
• easy cleaning of the precipitate;
• capacity of the heating element (heating rate);
• ease of installation;

• resistant to mechanical damage;
• affordable prices on cans in the shower to give (buy cheaper in the catalog will be released without retail markup).

Note! Expensive imported container have a special coating prevents scale formation. It is located on the inner "boiler" tank shower, shower is very convenient to use, but when bathing water remains tight.

Tanks vary in weight. Of course, it depends on the design features, the volume and the material used in the manufacture. It is important to bear in mind if you plan to buy a tank with the installation of the shower glass for combined heating.

The desire to buy a tank to the country soul while saving is quite feasible, since the cheap goods not necessarily characterized by poor quality. Buyers often overpay for the volume or those characteristics that are not in use. Having a complete picture of the upcoming purchase and parameters of this design, it is easy to avoid mistakes.

Positive and negative properties of the plastic tub and shower

Each such product has pros and cons, but the positive properties, as a rule, much more:

• a heater capacity and storage type system allows to control the temperature and adjust the parameters to a certain level;
• with the prospect of buying - long service life, if the recommendations;
• opportunity to buy a pot for a summer shower with a heating element to bathe in any weather;
• tank may be left in the open air in winter, since it withstands temperature changes from +60 ° C to -60 ° C (all of the water must be drained before the winter);
• in the case of a power outage in the tank can fill with heated water and use the ordinary shower;
• Modern products are manufactured from composite materials having an insulating layer, thanks which will be a supply of warm water for swimming at any time (without additional heating);
• summer shower when not in use, the tanks suitable for storing water reserve (at faults with its feed);
• containers are designed not only to clean drinking water, but also on the technical, though, for the holiday soul tank in this case will have to be cleaned more often.

Note! Metal containers provide heating from the sun, but they are not equipped with heat preservation system. These important characteristics to look for when buying.

Manufacturers claim that the expensive import of metal tank will last up to 100 years, although they eventually rust. But lightweight polymeric reservoirs produced from environmentally friendly food grade plastic that is inert to oxidation.

Disadvantages tanks are connected not only with the price of a tank for a summer shower (plastic and metal), but also with its installation, especially bulky models of 200 liters. Another problem - the need to monitor the volume of water, so as not to denude the heater with heating.

Water injection is typically associated with the use of the water pump if it is centralized or well water - water is supplied through a hose. If there is no pressure, it is necessary to consider a method of supplying water to the tank, it is sometimes problematic. Of course, not do without cleaning the tank, which do not like to do gardeners.

The different water tank plastic insulated storage type

The closed-type container not look within, so it is not always possible to determine the temperature of the contents of the barrel for a summer shower. In this case, hard to say how much water is left after using the heated volume in the tank, whether it will be warm for the next person who wants to take a shower. Therefore, the design is advisable to buy a semi-automatic heating and water level control. They are known as heaters "storage type", it is very convenient, but left without the attention of potential buyers due to high prices.

Tip! It is hardly necessary to save on comfort when it comes to buying a tank with heating for the holiday soul for many years ahead.

By design, it is the usual shower container with a heating element, referred to as TAN. It is designed to heat water to a predetermined level - grading scale is limited within 30-85 ° C. You can set the temperature of the lever - and after reaching the expected level of the system automatically turns off. After cooling, the relays automatically resumes operation in order to maintain the required temperatures.

Special insulating layer capacitance intended to reduce heat loss to a minimum. Such models are layered body having an inner and outer shell with an insulating layer. To no avail did not heat the water at night or in the absence of the owners, at the time of heater is disconnected from the power supply.

The power unit is relatively small - to 6 kW, and it is enough for reheating and heat holding tank. Interval switching is dependent on many factors, including the design features of the heating system. But a good producer of the environment temperature is almost no effect on the automatic operation of the heating element of the high level of insulation.

Related article:

Construction bath in the country: a video guide and tips for building construction

The main stages of the construction of buildings, requirements and tips. Common types of baths.

Metal container, heats the combined method, the insulating layer does not have. Tanks for the soul Plastic flat heated and heated from the sun, so they are connected to the power supply as needed. In such vessels the temperature is maintained as long as the sun is shining.

Constructions with the heating element without temperature control

Far cheaper if you buy tanks with heating for the holiday soul with power, but without thermostat. They are heated in a combined way, including under the influence of sunlight. Installation of the shower stall in a shaded place deprives this possibility, the water in the tank will be heated only to 25 ° C during warm weather. For comfortable bathing have to fill the tank the hot water heated by the boiler.

A heating tank from the network to the country soul has such structural elements:

• housing or container;
• an electric heating element (heater);
• plug with insulated wire for mains;
• pipes and hoses for filling / draining the water;
• overflow hole;
• thermostat;
• Lake divider with a tap;
• a removable lid sealed push-fit.

Normal tank with a heating element without temperature control is controlled by the users themselves soul. If time does not turn off the heater, it will bring the temperature of the water to boil and generate steam that can cause damage to the vessel.

Usually the temperature is checked by the sensations: open shower and make sure whether the water is hot. If it is cold, it is easy to catch a cold at the time of the adoption of water treatments. Without adjusting the water temperature to a comfortable washing can be no question. We have to follow the process of warming up summer shower with tank heating. With some experience, it is easy to control the heating time, the tank - up to 35-40 ° C in cool weather warms standard capacity for a couple of hours.

Large 200 liter tank is heated about 3 hours, but the heating time is still dependent on the material from which the reservoir is made. The main disadvantage of a simple tank for garden shower without thermostat - the need to monitor the amount of fluid and the heating process. In the case of boiling water shortage will lead to the fact that the heater will burn inside. Most modern tanks equipped with a thermostat, but its presence is necessary to specify when purchasing.

Buck flat plastic shower: how to choose the amount

Water pressure in the divider means is directly dependent on the shape and volume of the liquid reservoir. Those who do not like hard-hitting of the jet, it is better to buy a flat plastic tank for small volume soul. This will ensure a comfortable bathing, and for a complete wash in the summer heat is enough 35-45 liters of heated water a little bit.

Vertical design significant amount of force to beat due to large internal pressure. If a rather big family, everyone needs a minimum amount of water for swimming, so you have to choose the right capacity for capacity - 150-200 liters.

Useful advice! Reduce the power of the jet, you can use the shower head with a small perforation. Small holes good "filtered" water cascade, but they gradually become clogged with calcium deposits formed during the heating.

It should be understood that easily buy shower tank with a large volume of heated, but not every base cubicles or glass roof support the weight of about 20 water buckets.

Pointless to heat a large barrel of water, will swim if one or two people - it is uneconomical. When purchasing capacity should focus on how many people should go and see every day in the summer shower. This amount is multiplied by 30-50 liters (some missing or less), resulting in the planned volume. Of course, there are fans often splash in the summer, young children also have to wash more often, but they need less water.

Important! In plastic containers often have a special "breathable" cover, which prevents "blooming" of water.

If you buy a tank with heating for the holiday soul of compact dimensions (a barrel), it will be easier to install and clean. Relatively clean - is to ask when buying, how to do it in this design that will no longer have to look for specialists.

Metal tank heated shower:which to choose

Metal containers showers are in great demand as a long period of time, no one knew about plastic tanks. They may have the following form:

• flat;
• round;
• barrel;
• pyramidal;
• cylindrical;
• cubic.

Any metal tank is considered to be more durable plastic products, it has a higher resistance to mechanical damage. For example, it is unknown whether the "bombing" extreme hail polymeric tank stand, whereas the steel in such a case only slightly deformed. It is less attractive, but fully meets the needs of consumers.

Steel container more durable, they are made of metal with different properties. This can be:

• carbon steel;
• galvanized steel;
• stainless steel.

Often, products that combine combined heating, produced in such cases. The advantage of such designs is that the water is not stagnant, maintaining freshness.

Helpful information! Plastic tanks Cost ranges up to 9000 rubles. Metal container with Taine offered within the 12,000 rubles. Steel is estimated up to 4500 rubles.

Metal shower tanks are long. Although the prices are higher than in the plastic containers, they justify the costs in all respects.

How to choose the tank:galvanized steel or ferrous metal

Any bulk tank dark, left in the summer the sun heats the water automatically. Thus works physics dark surfaces, attracting heat. The shower tanks heated by the sun, preserved water temperature, so they are often released without internal "boilers".

Of black steel tank mounted on a roof, the most economical, it will operate autonomously. Most often gardeners constantly topped up with water in the shower tank to always have a supply. Any tank with heated shower may be replaced by a capacity of the black steel where water is supplied, and has a bottom watering can with a crane.

These containers differ sufficient margin of safety, but eventually they succumb to metal corrosion, especially if they are left without cover outdoors. However, metal tanks are designed for about 10 years. One can predict that in the future the product will be eaten by rust. Therefore, the outside of resin, paint, sutures coated with sealant.

Galvanized containers are the perfect 6-7 years, during which you can not think of corrosive processes. Over time they also lose their properties, especially at the seams. Products, through such "guarantee" the deadline is sufficient demand from consumers - for this time the low price justifies the tanks themselves.

The cost of galvanized containers is considered to be very democratic, so they can buy every cottager for utilitarian purposes. Flat plastic tanks still make them compete. However sensible owners prefer costly durable model that will serve more than one generation.