Curbing tape for the bathroom: a reliable method for sealing joints

SHARE
in social networks

FacebookTwitterOkGoogle+PinterestVk

When installing the plumbing in the bathroom needed to make the seams as airtight as possible, not only in order to avoid flooding the neighbors, but also for the prevention of mold in hard to reach places. After installing bathroom bowl between the skirting and tiled walls will inevitably remain a small gap, which will collect moisture. Curbing tape bathroom is considered the best option to help prevent the occurrence of most of the problems.

Curbing tape for the bathroom: a simple but reliable method of sealing joints

Curbing tape bathroom is the best solution to address the gap between the bath rim and tiled walls

Content

  • 1 When the need to use self-adhesive tape fillets bathroom, consumer reviews
    • 1.1 The main disadvantages of self-adhesive tapes for the bath
  • 2 Curbing tape for the bathroom: the main types of material
    • 2.1 The main options of sizes and designs curb adhesive tapes for bathrooms
    • 2.2 Other important parameters that should look for when buying
  • 3 How to glue fillets tape bath: video and photo
    • 3.1 The final stage of gluing, tips on installation

When the need to use self-adhesive tape fillets bathroom, consumer reviews

Some owners during the repair install bathroom bowl as close as possible to the wall, and then find that there is no need to conduct joint sealing. This statement is completely wrong, because in any case there are small gaps through which and will penetrate unnecessary moisture under the plumbing fixtures. Most plumbers consider it necessary to carry out sealing seams, whose width is 1.5 mm or more. This is because these are the slots are a place where constant, albeit in small numbers, a drop of water to penetrate.

Installation of the tape does not take much time and does not require significant financial costs

Installation of the tape does not take much time and does not require significant financial costs

Important information! Fungus and mold is not only spoil the attractive appearance of any bathroom, but also become the cause of an unpleasant smell, and in some cases provoke the development of certain health problems, including respiratory diseases and allergies reaction.

Properly selected seal bath not only helps protect the health, but also save time on cleaning room because the do not have to constantly clean out the fungal spores that differ unattractive black color. Especially that the installation of the belt in most cases does not take much time and does not require large financial costs.

The construction market is not standing still: constantly developing new materials that make it easier for repairs. Curb plastic tape - a convenient tool that provides high-quality sealing and prevents ingress of water in large gaps and even the smallest gaps. According to reviews, fillets tape has a number of advantages:

Fillets tape has the advantages of reliability, ease of installation, resistance to damage, low price

Fillets tape has the advantages of reliability, ease of installation, resistance to damage, low price

  1. Affordable. The average price of curb tape bath starts from 300 rubles. It all depends on the selected parameters.
  2. Reliability. Subject to the rules of installation use of the material ensures a reliable seal between the wall and the bathroom.
  3. Easy installation. Due to the high elasticity of the curb can be laid not only on a flat, but also on a curved surface.
  4. Easy installation. The material is fixed on the basis of the finished adhesive that allows you to quickly and simply put it on their own without the intervention of a specialist.
  5. Good resistance. Adhesive tape for the bathroom has good resistance to mechanical damage. Even with a surgical strike on a border not form pits or grooves.
  6. Easy care. The product does not require any special care or use specific cleaning agents. To clean enough to use standard means for cleaning sanitary ware. It is only important not to use harsh abrasive compounds and scrubbing brushes.
  7. Moisture repellent properties. Properly mounted belt allows water to be accumulated on the bath rim, shower or sink.
  8. Environmental Safety. The composition of the material does not contain toxic elements that can harm health.
  9. A wide range of. A large number of goods on the trading floors will help you choose the best option (with structural and aesthetic point of view). There is the possibility of buying tapes, borders for baths of different colors, shapes and sizes.
Correctly matched curb tape bathroom helps to prevent mold and mildew

Correctly matched curb tape bathroom helps to prevent mold and mildew

The main disadvantages of self-adhesive tapes for the bath

The basis of all the tapes for sealing of the PVC film which is robust and specific elasticity. Even so, with constant exposure to particulate matter may cause damage and scratches. In addition to the benefits, products have some disadvantages, which are not significant, but nonetheless need to know about them before the start of installation.

Among the main disadvantages of waterproofing tapes for bathrooms emit a short period of operation. In most cases the service period will depend on the characteristics of care, usage and quality bathroom ventilation performed. The average period of operation is in the range of one to three years, which is considerably less than the other types of borders, for example, plastic or ceramic tiles used for the main decoration walls.

On the downside can also be attributed complexity of replacing the damaged tape on the new one. In addition to the purchase of new material, which entails some financial costs will have to exert physical effort and acquire certain skills. To replace the need not only to remove the self-adhesive tape fillets, but also get rid of the hermetic rests on the wall and the surface of the bath. To perform this procedure, it is recommended not only to clean and degrease the surface, but also the right choose the best sealant, because the adhesive composition on the tape is not used in conjunction with acid silicones.

Important! If before the glue fillets tape applied to the surface of silicon with an acidic composition, the material not only peeled off, but lose shape.

The main drawback of tape toe to the bathroom is a short period of operation

The main drawback of tape toe to the bathroom is a short period of operation

The disadvantages and a limited selection of color choices. Most of the products are presented in pastel colors, most often it is white, which is considered the most common finishes for the bathroom. If you need to set the black, gray or colored tape, will likely have to contact the distributor to order a custom-made.

And yet, despite these shortcomings, in a situation where it is necessary to conduct a reliable and fast sealing interface with minimal financial and physical cost, the best option is to curb it is self-adhesive tape bathroom.

Curbing tape for the bathroom: the main types of material

Composition of the seal is determined by its primary function, which is considered a specific surface protection against moisture influence. Constant exposure to water causes the development of mold, mildew and other harmful microorganisms breeding. That is why only water resistant and water repellent compositions are used for the manufacture of self-adhesive tape the toe. Most of manufacturers for this purpose, polyethylene, considerably less basis is a synthetic polymer.

For better adhesion to the surface of the substrate border applied adhesive mixture, characterized by resistance to temperature and constant exposure to water. The leading manufacturer of additional product was treated with special chemical repellent pests, for example, various fungicides.

Fillets tape made of only waterproof and water-repellent compositions

Fillets tape made of only waterproof and water-repellent compositions

It is interesting! More recently, to seal the joints in the bathroom was used only silicone or even cement. In fact, as the sealant dries in the bathroom, not only affects the type of material, but also the conditions in the room: the temperature and humidity. The average of complete solidification of the liquid sealant out of 6 to 24 hours.

Before installing fillets tape, clean the surface of the well. Installation of flexible strips do not take much time, but nevertheless the appearance of the bath will be more attractive than after application of silicone. Many users report that hide irregularities and other flaws in the joints, which is especially important when it comes to uneven surfaces. Ribbons baths have a wide range of applications, due to the fact that the material varies according to parameters such as:

  • the size;
  • decorative construction;
  • method of fixing;
  • color.

As for the shape of the profile, the tape is separated into two main groups: angular, and curly. Corner models differ by the presence of a bend in the central part of the product, which allows properly and uniformly attach the border to a vertical surface and a side bath. This product is suitable for closure rather narrow gaps and adhered well to the base formed from the material used to create the plumbing fixtures, such as:

Fillets ribbon shaped profile is divided into angular and curly

Fillets ribbon shaped profile is divided into angular and curly

  • acrylic;
  • metal;
  • faience and porcelain.

A distinctive feature of curly ribbons bath is the presence of two bend lines separating the product long into three segments. It is important to know that in the central part of the adhesive is not applied, because the main task of this part of the border - to hide a wide gap between the board and the wall. Clay processed only marginal strip. To choose the right curly ribbon, it is necessary to determine in advance the width of the gap that should be closed by using the product.

The main options of sizes and designs curb adhesive tapes for bathrooms

On the trading floors there is a large selection of curb tapes bath sizes. The average length of 3.2-3.5 meters, which allows you to select your preferred option, regardless of the size of sanitary ware. In the case where this is not long enough, you will have to buy two separate skein tape.

By fillets band width is divided into main groups, specified in the table below:

Size, mm destiny
10x10 To narrow connecting slots
20x20 Used to seal zazorysrednego size
30x30 Hide large holes
38 oversize
60 Custom Size curb tape, allowing seal the large discrepancies between the wall and the board plumbing

Useful advice! Plumbing Experts note that before the use of curb tape, measure the parameters of the gap carefully. The optimum setting a border whose size exceeds the gap is not more than 5 mm. Overly broad stripes will look unsightly, but is too narrow will not provide reliable sealing.

Most often, the market can find it white goods, because this color is considered universal and the most popular in the regeneration of bathrooms. Regarding the choice of plumbing, the most common instruments in that color. The same tendency can be found when selecting the material for vertical and horizontal surfaces. Although, in addition to the bands of white, you can find the product in light pink, pale green and creamy beige design. Choose the right shade is recommended, focusing on the color or the plumbing or the surrounding walls.

Some manufacturers to impart tape used attractiveness figure edging and applying embossing. These options are particularly helpful decorating beat and complement home decor.

Besides white ribbons, there are products in light pink, creamy beige, pale green version

Besides white ribbons, there are products in light pink, creamy beige, pale green version

Other important parameters that should look for when buying

As for installation, then in strips it has important advantages, such as the presence of a mixture of adhesive factory applied to the backside of the product. The adhesive does not lose its qualities, its pre-closed by a protective film which is removed before the glue fillets tape for the bathroom. If the adhesive layer is absent, acrylic or silicone sealant is used for mounting, but in any case not acidic.

During the installation of the tape on which no adhesive layer is firmly fixes the sealant material on the surface and does not allow penetration of moisture into the gap between the fixtures and the wall. To avoid misunderstanding, before purchasing you must carefully examine the product to understand exactly what type of product you plan to buy.

When buying keep in mind that the foundation of any band for sealing comprise synthetic substances that give the required tape elasticity, flexibility and water resistance. Good qualities of adhesion differs butalonovy adhesive solution suitable for most surfaces. It is this adhesive is resistant to permanent changes in temperature and humidity levels that are constantly taking place in the bathroom. Other important points that you must consider before buying:

  • suitable shape profile;
  • the presence of an additional adhesive composition mixture fungicides;
  • correctly chosen width, from which will depend on the joint tightness;
  • color, fits perfectly into the overall design of the bathroom.
If the adhesive layer on the tape toe offline use acrylic or silicone sealant to install

If the adhesive layer on the tape toe offline use acrylic or silicone sealant to install

When buying also recommended to check the availability of complete silicone corners and the applicator, because glue fillets tape in the bathroom at the corners neatly without fail.

Important! Before purchasing you need to pay attention to the recommended shelf life, because even in a packaged product over time can lose their adhesive properties.

The average service life of the bands is usually 3 years, but, as evidenced by reviews, curb tape bath with gentle treatment can be used for 5 years. If the surface is lost attractive appearance earlier, better stick a new tape. That is why it is more convenient for this purpose to apply self-adhesive version.

How to glue fillets tape bath: video and photo

Before starting work, in addition to the acquisition of the tape, you need to check for these items:

Before the start of mounting tapes, it is desirable to bring the room temperature to 10 ° C

Before the start of mounting tapes, it is desirable to bring the room temperature to 10 ° C

  • means for degreasing, it may be any solvent acetone or ammonia;
  • silicone sealant;
  • gun for sealing joints;
  • masking tape;
  • scissors;
  • dryer (suit and the usual household);
  • lint-free cloth.

It is important to work to bring the room temperature to 10 ° C, because under such conditions it will only occur the complete drying of the glue. The whole installation process is divided into several stages:

  • preparation of surfaces;
  • bonding material;
  • checking the quality of the work.

Related article:

Skirting for baths: neat and practical design of the joints

How to choose the most suitable material. Features and benefits of each option. As a self-install the plastic border.

In the first step, before the glue fillets tape in the bath should conduct preliminary work, namely to prepare wall and skirting. If before installation takes place dismantling of the old tapes, be sure to completely wash off the glue and clean the surface well with any degreaser except turpentine. You must then give the surface to dry well.

In order to subsequently had to clean the walls and skirting bowls of silicone sealant is recommended to close them using masking tape. Before glue fillets tape in a bath, through the mounting slot in the gun applied sealant, which optionally can be further smoothed with a spatula.

To prepare strips of the correct length is completely unwound hank tape according to the size of the sanitary device and is clipped in place. In this case, reliability is better to leave a small allowance - 1-2 cm. If you watch the video, "How to glue fillets tape in the bathroom in the corner", can draw attention to the fact that to obtain an accurate seam gluing begin to perform with the long end.

Useful advice! To give the material greater elasticity, it recommended a pre-warmed using an ordinary hair dryer drying.

During curb its mounting tape is separated from the protective zone not once, but gradually, to avoid errors in the gluing. It is recommended to open 10-15 cm. In operation, the tape gently superimposed on the gap and presses. It should not be applied at the stretch material, because it set the fillets gently tape in this case will not work. Better just to smooth and press hard with the band, while constantly monitoring adherence to surfaces, especially in the field of tile joints.

During installation tape toe guard band is not separated at once but gradually

During installation tape toe guard band is not separated at once but gradually

If you view the materials that demonstrate how fillets glued tape in the bathroom corners, shows that the tapes are glued one by one lap, then the adjacent part is cut at an angle of 45 degrees. It should be cut off from the corner. Some experts for better work prefer to use corners for curb tape for the bathroom.

The final stage of gluing, tips on installation

After installing the tape should not rush to use the bathroom, it is best to within a day exclude the possibility of water splashing on the curb. That this is enough time for complete drying of the adhesive mixture and ensure reliable connection surfaces and products. After one day, you can accurately check how well organized installation. To this end, the tape is required to move a little to the side. If it does not move, then the work can be considered high-quality.

In the case of a fine brush you can try finding places to put on low-quality lock slightly inner side of the construction adhesive, and then pressed tightly glued to portion surface. Upon completion of all works necessary to accurately separate the masking tape.

Affordable price curb tapes and reliability have contributed to the wide dissemination of this material among users. In this regard, you can find a number of useful tips that will allow inexperienced owners avoid mistakes:

At places with poor fixation can cause a bit of construction adhesive and press firmly glued to the surface of land

At places with poor fixation can cause a bit of construction adhesive and press firmly glued to the surface of land

  1. Do not use tape that packaging is damaged, deformed or leaking.
  2. Particular attention should be paid to the preparation of the surface, because the presence of the projections or the remnants of the old adhesive quality joint will not work.
  3. After 24 hours water tape mounting and detergents do not affect the quality of gluing. It was after this time, you can clean the strip of dirt and sealant residue.
  4. When you buy should pay attention to the purpose of the product, because, for example, curb tape "Country" is designed for garden works. It is distinguished by black color and less elasticity. This option is for sealing joints do not fit.

Fillets tape baths are considered the most inexpensive and easy way to avoid drips of water for a bath. Cope with installing the product available to every owner, it does not need to buy any special tools or expensive tools. In most cases, sticking (with training) will not take more than 3-4 hours. Using the tape is not considered durable option, but easy installation allows you to enhance the appearance of the room when you need it.