Decorative cushion for walls: especially the use of tools for painting

To create the original interior, and in particular, a decorative wall covering, can be used a wide variety of tools, among which not the last place is occupied by the decorative roller walls. This is one of the easiest ways to paint a wall without the need for complex and expensive technologies. Consider what you should pay attention to the selection and use of this tool.

Decorative roller for the walls: what it is and how it works

The main task of the roller - to give the surface of the wall or ceiling of the desired color and texture. You can use it to work with any paint completely, although it is sometimes used for plaster, giving it thus a certain texture. But before you buy a particular model, it is necessary to read a general description of this tool.

Components of a paint or decorative roller:

1. Clasp - a kind of bracket that serves as the basis for the roller. Its curved shape allows to fix the handle with one hand and directly the bead on the other, giving structural integrity.
2. Handle - the part that in the process you will hold in your hand. Usually, for its manufacture using plastic, wood or rubber. For the convenience of doing it on special cavities, which allow you to conveniently place the fingers and prevent slipping in the hand.
3. Roller - the bulk of the roller which has a cylindrical shape and fits over the reverse side from the arm clasp. When the roller rotates freely. As a material for the manufacture of commonly used metal or plastic.
4. Coat - just the part through which the paint is applied. She put on top of the roller and made it mostly from foam rubber, fur or suede.

This simple, but at the same time thought-out design, allows to significantly increase the performance and speed of coloring and reduces paint consumption. In addition, in the process are not formed drips and splashes, and the quality of the wall staining exceeds the many times that can be achieved using a conventional paint brush.

Important! Much depends on the quality of the acquired roll. But if the earlier all products of this type were checked for compliance with state standards, the market today can be found in almost any of the quality model. That is why the selection process need to be as careful and pay attention not only to the appearance of the instrument, but also on the JECFA 2 paint roller.

What are the dimensions of a paint roller

Purpose and size of the roller - the characteristics that are directly related to each other because of the proper selection of usability depends in each individual case. For example, if you want to paint a large flat surface, it would be wiser to use a roller, working part which is as broad as possible. But for working with angles better suit a small tool. So, there are the following dimensions of the rollers for decorative painting of walls:

• mini-rollers. With their help it is extremely comfortable to work in small areas and with difficult surfaces. The diameter of the roller in this case does not exceed 15 cm, and the width of the working surface is usually not more than 150 cm;
• midi-rollers. This tool has a slightly larger size of the working surfaces (150 to 250 mm). The diameter of the roller in this case may be from 50 to 90 mm. These rollers are considered universal, as perfectly suited for most jobs and is quite comfortable to use. They bought most others;

• facade rollers. It is the largest and most extensive tools, the working surface of which exceeds 250 mm. The diameter of the roller in this case may be up to 80 mm. These rollers are considered to be professional, and almost never used in everyday life. Moreover, in order to work with this tool, you need to have certain skills and some experience.

Choose the size of the roller must be tailored to individual capabilities and experience masters, as well as the features of the surface with which to work with. At the same midi-roller is almost always excellent and copes with all tasks without problems.

Useful advice! The more the working surface of the roller, the more it is able to absorb ink. Therefore, you should not choose too large models, because in the process there may be some difficulty, and you will tire quickly.

What decorative roller for walls to buy: coat varieties

Coat, perhaps the most important criterion for selecting a roller for painting the walls and ceiling. After all, the end result and the appearance of the surface depend on it. Therefore it is necessary to consider what are coats rollers:

• rubber rollers are made of a soft or hard rubber. Often such tools are expressed and texture are used to make plaster bump, and for printing on wallpaper or a painted surface.
• polyamide - is made of a synthetic fiber which is characterized by extremely high wear resistance. Thus in embodiments can be found commercially with different pile length that can be from 8 to 20 mm. Such rollers are ideally suited for use with water-dispersion paints;

• coat of fur, which is often all the other sheep. This option is also ideal for use with water-dispersion paint, as well as oil and various lacquer compositions. It is obvious that the price of a paint roller with a fur coat would be above all others;
• Velor roller generally used if necessary to apply a finishing coating layer. It is best suited for this purpose, alkyd, enamel and oil paints;
• polyacrylic paint roller similar to the polyamide. It is characterized by high resistance to aggressive components of the composition, and therefore is suitable for use with any color;
• foam - Another material widely used for producing rollers. But in the process of working with him, you need to be careful, and among all the compounds it is suitable only for water-dispersion paints. In the process of coloring the surface should not have too much pressure, as this may cause the appearance of sagging. But the speed of work with models several times higher than all other options;

• dressing rollers made of polyester, which is the cheapest feedstock. Price per piece paint roller in this case can range from 60 rubles, but expect a long service life of the tool is not necessary. Therefore, such rolls commonly are used once or twice to work with the aqueous dispersion or acrylic paint and then simply thrown;
• korotkovorsisty or flocked cushion - the best option in that case will work with waterborne paint. But you need to know in advance that such rollers is strictly forbidden to be used for work with water-based paint.

Each type has its own advantages and disadvantages, so before you buy roller for a decorative plaster or paint the walls, it is necessary to take into account the particularities of each model.

Useful advice!Yet, the most durable and reliable can be called a coat of synthetic origin, ie, polyamide and polyacrylic, since they are characterized by the highest resistance to aggressive substances.

What else are rollers: specific tool types

In addition to standard rollers, types and characteristics of which have been listed, there are several unusual types, the use of which is resorted to only in special cases. So, release these types:

• corner rollers. This device is a small wheel, working part of which is narrow. Typically, the material is polyamide, polyacryl or velor. This simple device allows you to produce the most accurate color even in the most remote places in which conventional roller is simply not accessible;

• Needle rollers. In this case the working surface of the article coated with rubberized studs, designed to eliminate air bubbles, which are often several coats of paint. Most often, this tool is required when working with viscous inks;
• structural rollers for decorative plaster or paint. A variety of such models really great, and a variety of effects can be created through this tool on the surface;
• rollers for pipes. Most of all they resemble large scissors because clasp has two cranks spokes, on which are mounted two rollers. At this size of the tool is chosen according to the diameter of the painted pipe.

Textured rollers for decorative plaster and paint walls

Textured roller for plaster or painting the surface of the walls - a special kind of tool, which is represented by a wide variety. It can be purchased ready-made or make your own, using as a basis the old roller and the materials at hand.

Related article:

Paint the walls in the apartment: features, types and application recommendations

Advantages and disadvantages, types and features of the coloring compositions price. The choice of dye and optimum colors.

Textured roller - it's a great way to decorate the surface, without the need for too complex and expensive technologies. And in order to make sure how unusual and beautiful can be the effect of using textured roller for painting walls, enough to see photo examples presented on the Internet.

How to choose the right roller for painting walls and ceiling: professional advice

Huge selection of different rolls able to confuse almost everybody. So in order to not make the wrong choice, it is necessary to once again draw attention to all the important aspects and observe the following experts:

• Before you buy a roll, check it out in the store. For this effort to crush the coat to vote deformation. If the coat is too much crumpled, such a roller it is better not to buy;
• when buying a roll of a long-coat must first inspect to ensure that the fibers do not fall out. Otherwise, you will be faced with the hairs on the surface of painted wall or ceiling;

• if you are not sure what a paint roller to fit, it is best to give preference to the Universal version, which is, for example, polyamide rollers;
• if you have to paint the walls in the apartment, it is enough to roll with a short handle. But if you pay attention to how to paint the ceiling of the roller, it can be seen that for this there are special telescopic handle;
• clasp roller should not be too soft because this can cause deformations, which in turn affect the quality and duration of the painting surface of the tool life.

By following these simple but very important guidelines, you can buy high-quality roller, which It allows you to make high-quality surface coating, spending a minimal amount of time and efforts.

Useful advice!If necessary, work with several colors, it is not necessary to purchase a number of rollers. Much easier to buy an extra coat, which can be changed as necessary in the video. Also, since you can save considerably.

How to paint roller wall: the right paint application technology

Choose and purchase high-quality tool - this is not all. It is equally important to understand how to paint roller wall, and what rules should be followed, so that the result will meet your expectations.

How to paint roller - a question that at first glance may seem strange or even inappropriate. After all, given the simplicity of the design, it may seem that a mistake in the process almost impossible. In fact, there are some subtleties that must be taken into account in order to eventually get a perfect surface.

The first step is to pour the paint in specially designed for this purpose tray, the size of which allows freely dip into it roll. In this capacity special corrugations which are provided roller need a ride to the paint evenly distributed across the surface of the coat. It must be done several times.

Then you can start to paint, however, first necessary to decide on the paint scheme of the room. Usually start from the corner of the room, which is located near the window.

Another important aspect that many experts pay attention - how to paint the walls a roller without a trace. According to professionals, it is sufficient to adhere to the following rules:

• pressure on the roller should not be too strong;
• using a textured roll, a second coat of paint must be applied fully only when the dried basis;
• full color can not tolerate the presence of gaps and poorly dyed areas;
• every movement must be performed smoothly;
• roller must uniformly carried out in the upward direction and then back;
• Ideally movement should be directed slightly towards the diagonally away.

Useful advice!A great help in the work can be a video. How to paint the walls a roller without streaks can be seen in the appropriate tutorials, which clearly reveal all the subtleties and nuances of this work.

How to paint the ceiling roller: especially the work and recommendations of the experts

Particular attention should be paid to the ceiling painting technology, as with the surface of the work more complicated. Many people wonder how a roller to paint the ceiling, and it is worth to pay attention to these aspects:

• coarser than the ceiling surface, the longer must be the pile rollers roll;
• dyeing ceiling is best to use a roller whose stem length is approximately 25-40 cm;
• in the presence of a seam in the coat, the band will remain on the painted surface, which is not very good if you are aiming to make the surface smooth and beautiful.

The rest of you can make a choice on the basis of standard types and sizes of paint rollers, using all the same orientation as when selecting a tool for painting wall surfaces.

Stealth roller painting the ceiling: a video guide for beginners

Learn the ins and outs of staining the ceiling you can roll looked appropriate videos that showcase each stage of works.