Kitchen sink stainless steel: features selection

Sink stainless steel kitchen is considered along with the cooking hob, as one of two main elements related to the organization of power in the family. Well-chosen product will allow carefully wash fruits, vegetables and other foods. Used dishes will be able to quickly lead to a perfect cleanliness. The organization of space in the kitchen style favorites will not be difficult for the owner.

Kitchen sink stainless steel: the advantages of using

Kitchen sink stainless steel used in most homes. Among the reasons for the choice of this option among the proposed car wash manufacturers, to identify the most significant:

• durability at a relatively low cost;
• ease of installation, combined with the ability to enter the product in almost any interior style;

• availability of a wide range;
• compliance with hygiene requirements. The material does not contribute to the concentration of microorganisms;
• ease of maintenance.
• aggressive media and corrosion damage caused will not be;
• due to elasticity, ductility, and strength of the material is eliminated mechanically damaged accidentally fallen objects;
• ability to withstand heating to become 1450ºS allows no fear of damage caused by the action of boiling water or hot dishes;
• the impact of temperature changes do not pose a threat to material goods;
• clean design easily recyclable, can be sent for recycling.

Note!The matte surface of some models of sinks - it is not just a design decision, but also additional protection from mechanical damage.

Kitchen sink stainless steel, which prefers to buy the majority of consumers are inherent drawbacks. These include:

• the desirability of the earth. The modern kitchen appliances always will. Therefore, you should worry about security measures when dealing with material with high electrical conductivity;
• inevitable appearance of limescale. Get rid of the pop salt simple plaque, wiping dry the surface after each use;
• flailing about sink water produces a lot of noise, especially when a small thickness of the steel sheet. Known manufacturers produce low-noise products, using thick walls and installing on the back side of the structure rubber or plastic lining;
• thin-walled articles also inherent oscillation mixer displaceable when pressure is changed, because the bent steel sheet.

On their own to cope with the noise as possible. It needs to be applied on the back side of the bottom of the shell layer of conventional foam and let it dry for a day.

Note! It is best to choose a sink drain with a remote control, then do not have to put their hands into the dirty water to remove the plug.

Damage in the form of a steel surface deflection can occur when falling heavy object pointed shape. However, such a scenario is highly unlikely.

Kitchen sink stainless steel: what properties must have the material

Selling quality products accompanied by the provision of a passport, which necessarily contains a reference to grade of steel used and the steel grade according to Russian Standard 50851-96 P or international standard ISO 9001.

Sheet thickness producers set in a rather wide range - from 0.4 mm to 1.2 mm. It is made of steel such brands:

AISI304 (Labeling may use different notation - 304 or 08H18N10). When purchasing goods, released by the European manufacturer, we can encounter such labeling options - (EN) 1.4301 and (DIN) X5CrNI18-10. In the alloy, a bulleted thus assumed carbon content below 0.8%, the combination of chromium (18%) and nickel (approximately 8-10%) are considered as ideal. This embodiment is preferred since baking is used special steel. To buy cleaning the kitchen with stainless steel such brands will have to pay a relatively high amount.

AISI204. Other markings - 204. Steel grade 204 is easier to handle, which affects its cost and the cost of products made from it. Buying a sink made of stainless steel grade 204, will be able to spend less money. It will serve not so long because the alloy is much less chromium content provides strength. Even more important is the low content of nickel, which provides resistance to corrosion processes.

Alloying of steel used in the manufacture of washing affects the strength, ductility and corrosion resistance, is shown in a characteristic luster surface, which is easy to polish.

Ha note! Shell with a smooth surface as class "luxury", and contrary to popular belief, care for them in times easier than others.

Not too conscientious manufacturers, kitchen stainless steel sinks are made from inferior quality steels, which are designed only for technical application. Dealing with the material with 12H17G9AN4 Russian markings or European DIN - X8CrMnNi188, it should be understood that the used steel AISI202 grade. Therefore, it is possible that eventually manifest traces of corrosion in places of tension (the bends or joints), change the color, the surface is covered with structural spots.

Therefore, you should not buy a sink made of stainless steel for the kitchen through an online store and pick up in Real shopping center, to be able to ensure not only by visual in its capacity as inspection. Namely, to realize that the structure is made properly, the alloy with suitable properties for use in the kitchen properties help magnet. It is assumed that its sliding on the surface of the product must be unobstructed. Adhesion of the magnet to the vertical portion of the structure accurately indicates low quality material used.

Especially production technologies for metal kitchen sinks and types

To manufacture a stainless steel sink-possible by using one of two methods: welding or stamping. When deciding what to choose for the kitchen sink, this aspect also has a certain value.

Making the welded connection sinks provides several parts. With welds connect the cup and base. The most problematic part of this design are exactly the welds at the location where, when an improper execution, may eventually begin to flow. Cost welded sinks significantly higher than stamped. The explanation lies in the benefits of using welding capabilities, far more than in stamping:

• elementwise fabrication allows greater flexibility in the modeling of the production, significantly improve the quality of individual parts and structure as a whole;
• application of the steel sheet of greater thickness allows to make the design more robust, reliable and less noisy;
• in relation to the depth, shape and dimensions, perform finishing range weldments is very varied.

Processing polishing seams making them completely invisible. Mortise sink considerable depth to the large kitchen, which can be applied to the foodservice, manufactured exclusively by welding.

Stamped sinks, devoid of welds, there is a place in the kitchen, where the product is not expected operation in a stressed mode. Perform stamped designs, cycling special machines. Using the whole steel sheet in a simplified production process has a positive effect on costs. Disadvantages of the method include the possibility of forming non-uniform thickness when the surface irregularities execution technology. Moreover, the product fails to obtain a sufficiently large size and depth due to restrictions arising from the use of the standard steel sheet.

For a long time the cup depth in the manufacture of washing by stamping did not exceed 150 mm. Now a number of manufacturers able to overcome this disadvantage by increasing the competitiveness of their own products.

Where is the bill of lading and a built-in sink countertop for the kitchen

One of the important considerations that influence the choice of washing, is the way in which it is planned to install.

Based on the method of installation, kitchen sinks are:

• embedded or integrated;
• overhead;
• Cutting.

Overhead sinks equipped kitchen for Khrushchev with a sink in the corner.

Note! Cheap overhead cleaning is not mounting kit and must be purchased separately. If you do without the clips, shell will be displaced during use.

Invoice sink to mount a snap. It is located on a floor cabinet, replacing the countertop. An important advantage of such a construction, in addition to elemental ease of installation and low cost, is the thickness of the steel sheet - not less than 1.0 mm. Water connection is accompanied by the manifestation of the usual lack of such structures - Moisture on the pedestal. Furniture can deteriorate quite quickly, if you do not monitor the condition of the slots.

Integrated washing are sinks for kitchens, embedded in the countertop. Type countertop not important, but the installation is fraught with difficulties, particularly with the implementation of milling. Bowl, as a rule, fall below the tabletop. Built-in kitchen furniture design is quite expensive, redeeming it original appearance. It combines an integrated sink, as usual, with the top, for the manufacture of which used natural or artificial stone.

Related article:

Kitchen sink made of artificial stone: characteristics, especially the selection and care

Characteristics and composition of the artificial stone. Model and shell color of artificial stone in the kitchen. Performance. Advantages and disadvantages.

What features are different Mortise sink for the kitchen

Most often installed in the kitchen sink mortise. The versatility of this type of construction allows:

• install it exactly like invoice sink;
• place on top countertops. Only cut-models can take advantage of the presence of countertops made of particleboard. Bumpers washing protective barrier protects the foundation from moisture furniture to be installed;
• Sink for the kitchen, built-in sinks - another option is more expensive. Sinks for kitchen sinks combine well with stone (natural or artificial) materials.

Run Shell installation in a worktop in the kitchen or arrange for the kitchen sink under the table top is much harder than simply put the sink on top of the floor cabinets. Therefore, the cost of this type of tie models is much higher.

This construct is inserted into an opening cut out using a specific template. The configuration provides the availability of special fasteners. After finishing the installation, you need to seal the joint between the sink rim and countertop to prevent ingress of moisture and damage furniture.

Mortise sink stainless steel acquires the majority of buyers because of its convenience, hygiene and relatively low cost.

On a note!Inset sinks are suitable for installation in a worktop made of any material, including artificial and natural stone.

The choice of surface texture for cleaning of stainless steel in the kitchen

The cleaning surface may be accomplished in several ways.

Matt. The most common, matte appearance can not be called too spectacular and eye-catching. But it has an important for any housewife who do not have unlimited time to stay in the kitchen and dignity. Caring for stainless sink with a matte surface is easier and a lot of time is required. In addition, you can choose a matte surface, complete with moth-eye pattern. It looks like a textured surface such, for example, a satin or linen cloth. It looks natural and original, making the interior of the attractive features of the kitchen.

Glossy. Glossy surface with a polishing can be brought to a mirror finish. Stainless sink with a glossy finish can successfully fit into the interior of the kitchen, decorated in the style of hi-tech. Urban space teeming with glass and nickel-plated surfaces, is quite suitable for such products.

Invoice (relief). Gorny and shiny "satin" surface is necessary to ensure a constant watchful care to get rid of constantly receive the following from the smallest drops and scratches. Textured surface with a decoration in the form of natural tissue, for example, linen or mikrolna can be set without fear of the appearance of streaks and scratches. But there will be some difficulties associated with the care of such a surface.

Useful advice!A sink with a matte or embossed surface can be equipped with a kitchen, made in any style.

Application PVD-coating stylized brass, precious metals or noble bronze, it provides additional protection for the surface. Decorative coating can be used for classic-style design, Provence, or country, minimalist or high-tech.

Features sink design, made of stainless steel

The most important component is a bowl sinks. In classic designs it is single and the depth is 180 mm. Washing depth of less than 160 mm are considered to be small, they are not too easy to use as quickly filled with water and spray fly away from the sink. At depths greater than 200 mm using the sink and not very convenient, as it is necessary to lean heavily on it.

The shape of washing are:

• square, with a side of 500 mm or 600 mm;
• rectangular. The most common options - 600h500 mm 780h500 mm and 800x600 mm;
• circular, with a diameter of 400-500 mm;
• oval;
• five- or hexagonal.

The drain hole may be a diameter of 2.11 inches, which is usual and suitable for conventional siphon. In current models diameter of the drain is increased to 31/2 inches, which allows for installation chopper food waste and water to produce fast.

For added convenience, the washing can be completed with side wings, one or two, providing countertops protection against moisture and mechanical damage to nature and comfortable accommodation utensils.

Important!Welded model budget price segment can be equipped with wings made of cheaper steel. But visually all the details of shell look the same, so it is necessary to inspect all of the same magnet.

High wash component manufacturer various optional accessories, which sometimes challenged utility consumers:

• Colander (trofleksom). Add to cart, similar to the familiar colander can be folded or washed unfrozen foods. Mounted in or adjacent to the sink;
• cutting board (plastic or wood). Mono- or dvuhplastinchatuyu cutting board is attached to the edge of the cup, allowing the shift;

• dryer for washed dishes. Secure it to the relief surface, let moisture flowing from the crockery, be in the sink;
• dispouzerom. Design, set at the bottom of the drain is designed to grind the waste found in him, with the exception of solid objects, hair and thread. dispouzera work provides electricity or water pressure. Wash the dishes become easier, but it is necessary to protect the device from falling into these undesired objects.

A variety of sinks made of stainless steel is that the pick up something suitable for the kitchen can be of any size, regardless of the features of styling.