Glass partition for the shower: beautiful design bathroom

Today there are many ways to design bathrooms. Along with the classical forms of rapid popularity acquire modern methods and functional objects, such as a glass partition for the shower. She consults with a number of problems, both practical and aesthetic. More details about the features of the design and the rules of her choice to tell this article.

Shower partitions made of glass: the appearance and features of the structure

Shower partition - the best way to solve the problem in setting up a small enclosing structure in the bathroom. Use of such products - to make room for water procedures are not only functional, but also practical, comfortable and beautiful. The peculiarity of the interior of the subject - in its universality. Partition can literally pick up any bathroom. Ideally - to make customized with the necessary dimensions and design features of the room.

The lack of frames, lintels and frame give the product a visual lightness, airiness, even weightlessness. As a rule, for the manufacture of glass partitions in the bathroom using tempered glass, wherein heat-resistant and heavy-duty performance. Such a material stronger than conventional glass several times. Even if the glass is broken, the fragments are blunt, so the chance to cut yourself excluded.

Externally, it is a piece of flat glass of a certain size. Most often there are models without frame with fittings, which is attached directly to the glass. This frameless partition. If the design has a frame, it may be added in the form of an aluminum frame profile. This frame partition.

The functionality of the glass partition in the shower

The partition in the bathroom is set in two cases: if necessary, divide the room into functional zones, without prejudice to the total area, or for the purpose of arrangement of the shower. Both options are winning in favor of glass partitions, so how to solve two problems at once: design and functional.

Partitions help the most rational distribution of space in the bathroom of any size, fully coping with their original functions:

• detection limit;
• protection of the room is a shower of spray and foam;
• visual isolation that allows to hide the person taking a shower, away from prying eyes.

Useful advice!Glass partition with opaque or matte finish - ideal for reciprocally toilets since it allows to use the bathroom simultaneously to two men.

Due to the functionality of partitions in the bathrooms used not only in small apartments with sharing a bathroom, but also in private homes and public places. For example, in sports clubs, medical and educational institutions, they are used to separate multiple shower cubicles. Functional features of partitions formed the basis of their classification. In addition, the design is distinguished by the use of options and combination of materials, by the presence and number of component parts.

The advantages of a glass partition to the bathroom

The main advantages of the glass partition lies in the material from which they are made, as in itself tempered glass has a number of advantages:

1. Shockproof. Almost complete resistance to mechanical damage ensures fairly thick glass 5-12 mm, which passes high tempering temperatures.
2. Ensuring hygiene. Glass pane can be washed using a variety of abrasive materials without fear of their haze or damage.
3. Safe use. Even in the extreme case, when the glass is still broken, it is not a threat. This is due to the fact that very small fragments are formed with no sharp edges, and prevents spillage of special protective film.
4. Universal design. Glass partitions for the shower will fit perfectly into any interior.
5. Compactness. Custom-made walls are made of small size and low weight that allows you to use them as spacious bathrooms, as well as in compact bathrooms.
6. Aesthetics. Stylish and beautiful appearance, and the ability to decorate deserve special attention. Glass partitions are stunning looks. They are a perfect complement to the interior, while protecting the environment from harmful effects of moisture. And the ability to make a product to order makes it possible to acquire a practical thing in accordance with the overall design.
7. Tightness. Fixing to wall using special fittings and quality seal provides reliable protection against the ingress of water beyond the septum.

Aesthetics and walls leak in the bathroom glass

Using the design in conjunction with the appropriate illumination add to its styling, giving the room an extravagant look. If the interior complement the original accessories and decor elements vannogo in the form of shelves made of glass, chrome-plated holders, hangers and hooks, that are guaranteed consistency of style and comfort.

Important!The main sealing septum provides a special transparent seal. It is attached directly to the glass. Due to the plasticity of the material creates a maximum fit openings. Thus, the threat of leakage and water splashing is minimized.

Along with the aesthetic characteristics of the partition serves another important role, ensuring the tightness of the room. Secure attachment, the use of silicone sealants and special profile eliminates any possibility of leakage. For use in high humidity conditions apply accessories of the highest quality, needs no special treatment. Manufacturers of branded products is enough to wipe with a soft cloth, so that it shone like new.

There are three degrees of tightness walls in the bathroom:

1. Contour provides protection against dripping and splashing spread all along the line proleganiya.
2. Porozhki profile and seals prevent leakage of water at the bottom of the shower of glass.
3. Partitions without circuit, protective profile and the nut have the lowest level of impermeability. Such designs are set as a decoration and not for sealing.

Types of shower partitions Glass shower in appearance and structure

There are a number of significant features that underlie the different classifications of partitions for the shower. First of all, the construction differ depending on the presence or absence of the frame.

Frameless partitions have more air, even weightless appearance. In a small room visually increase the space. At the same time, these constructions because of the absence of the seal does not have a reliable protection from moisture and are more susceptible to mechanical damage.

Wireframe model more reliable, since the protection profile prevents water splashing over the septum. Scaffolds made of metal or plastic. Between this material and the glass deposited silicone profile. If you add the equipment, a few accessories and additional accessories, the design can be easily transformed into a comfortable shower.

Lack of partitions in the frame consists in that in the field of glass and metal compound can accumulate dirt and, consequently, form the fungus. When chromium plating rust damage can occur on metal parts.

Partitions are divided into several types based on their shape. In particular, they are angular, U-shaped, triangular, multi-faceted and even rounded. Above structure can be flat, arcuate or have the shape of a wave.

Depending on the structure of the glass cloth septum distinguish matte, translucent, tinted with, stained decorated photoprint or other kinds of decoration. According to the principle of mobility mobile or stationary isolated structures, the location of which varies with special rollers.

Classification of partitions for walk-on functional features

In the presence of the partition windows, based on the method of their opening is divided by folding, sliding, and articles garmoshechnogo pendulum type. Swing model is installed in a shower room with a large area. A separate species in this classification make design, do not have a door - with an easy opening.

Useful advice!Installing the glass partition to the bathroom can be in different places: in the bathroom, in the shower tray or in order to divide the space in the shower. It is necessary to take into account at the design stage or under the order of choice items.

The material used depends on the functionality of the partition. In accordance with this feature of the structure is divided into manufactured from sheet material and stekloblochnye. Light transmission also forms the basis of a separate classification. The articles may be transparent, translucent or opaque. Impervious is typically used in a joint bathroom (to use the bathroom with two family members).

Mobility is also the basis of classification. On this basis distinguish stationary partitions and transformers. The latter can be easily set to any convenient place or simply removed. roller mechanism is used for movement. Depending on the destination partition is used for the installation of shower cabins or for functional zoning of space in the shower or bath.

Partitions for the shower or shower, what better

Shower cabin and glass wall have a number of undeniable advantages, but there are several reasons for installing partitions becomes more preferable. Firstly, this is a relatively low cost. partitions price may be several times less than the cost of the shower.

Secondly, the walls are widely used in the interior. Lineup cabins is limited and can not always fit in a small space. The choice of partitioning key word rests with the buyer who makes a decision with respect to its size. Moreover, the owner can order the production of the design of suitable size and design.

Thirdly, efficiency and ease of installation of the partition. This advantage makes it possible to carry out their own installation, requiring minimum construction skills from the owner. specialist services are also inexpensive cost. For cabin installation requires a professional approach, as well as a significant amount of time, cost and effort.

The main advantage of the partition in front of a shower is its compactness. The cabin is more cumbersome, it literally eats up valuable space, especially in a small room. It is this fact that explains the growing popularity of glass walls recently.

Material partitions for showers: plastic and its features

In the manufacture of partitions using a variety of materials. When making a choice, are guided by the price, practicality, functionality and durability of the finished product. Basically, there are different types of plastic and glass. Consider the features of each.

Related article:

Shower enclosure of glass without pallet: comfortable solution for the bathroom
Features choice to the size and shape of the room, design options. The choice of accessories, installation tips. Features care.

Plastic - a polymer material, which is the main advantage - price. Partitions made of polymeric materials are at least half the price. In addition, they have low weight, easy to transform. Articles made of plastic is much easier to shape and design. In addition, the material heats up much faster. These cabins are strong enough and safe. They can not break, even when a strong impact on the partition just cracks.

Useful advice!The apartment with small children and animals is better to get a partition of a more secure and lightweight material - plastic or Plexiglas. Subsequently, this temporary structure can be easily replaced by a piece of glass.

A disadvantage of plastic is easily scratched the surface, including the use of abrasive cleansers. Design in the bathroom are made from different types of plastic. Shower partitions made of polycarbonate is characterized by a higher viscosity and greater impact resistance. Acrylic is more resistant to scratches.

Partitions for shower of glass: the advantages of the material

Silicate glass is much more expensive, but it has many more advantages than plastic. Glass is more transparent, solid look, it almost does not remain traces of scratches. With proper care shower made of glass are used for a long time, and wash them just enough. The service life of glass doors and walls above, and caring for them easier. In order to prevent the possibility of injury for the manufacture of structures it is not recommended to use ordinary glass.

To take partitions tempered glass. The material after impact shatters into small fragments with no sharp edges. To avoid such consequences, you need to carefully handle the product. A subspecies of tempered glass is laminated. A multilayer material characterized by a polymer film between the sheets.

Take care of the glass is quite simple. Easy care is provided by a special coating, which is applied to the surface of the producers. Due to the resulting film drops just flow down, leaving no trace. Price shower partition of a material is significantly higher than that of glass not liable treated as specialize in such production, not all manufacturers of sanitary equipment.

Washable cover creates two ways. In the first case, the glass surface is subjected mikroshlifovaniyu by introducing nanoparticles into the glass. The maximum effect that persists for decades. This technology is used by leading companies for the production of glass sanitary ware. The price of this partition certainly impressive, but the quality justifies the price. Another way a budget, it is applied topically on spetssostava material. The service life of this coating - no more than five years.

The design and dimensions of the glass doors and shower partitions

baffle configuration depends on the shape and dimensions of sanitary ware, so it can be straight, curved or in the form of a trapezoid. The door for a shower or bath partition wall may have a flat or curved shape. Some elements are fixed motionless, others are mobile and open, or moving on the rollers, or by a door hinge. Comfort and reliability ensures quality fittings. It should make the right choice, not savings.

In accordance with the size of the shower walls have some limitations, which is caused by the dimensions of the glass fabric, from which the product is manufactured. The dimensions are also dependent on the type of structure that defines their performance.

Thus, frameless shower partition can have a maximum height of 2.7 m and a width - 4 m. The thickness of the glass products is in the range of 7 to 12 mm. The same product is characterized by a thickness of the frame. But the frame structure can reach a height of 3.2 meters with a maximum width of 6 m.

Useful advice!Shower partition wall with doors in the bathroom helps to create separate comfort zones for showering, washing and other procedures. At the same time, in order to wash, do not need to get into an overall more shower.

Glass partitions for showers: recommendations on the selection

Manufacturers of Glass structures specializing mainly in the production of shower enclosures and shower doors. Selection of small batch production of partitions, as it is the product for a bathroom mainly made to order. Rather, it is an addition to the already finished interior than an independent household items.

The basis of such a feature is a number of factors related to the price of the material, dimensions premises operable designs and individual customer requirements. It is worth noting that virtually any, even a small town, you can find a company that specializes in the manufacture of glass products, including shower partitions.

If, however, the decision to purchase the finished design, then when selecting desirable to draw attention to a number of details, including:

• the full adherence of the protective film to the material and free from air bubbles, small objects and injuries;
• the state of the carcass structure. All items must be securely connected to each other;
• the quality of the material (as the glass itself, and with metal fittings). It must be durable and moisture-resistant;
• the state of the partition. It is necessary that she was flat, not the behavior, without chips, cracks, and other defects.

Features installation of shower glass partitions and shower

Usually the installation of devices and objects in the shower of glass manufacturers are engaged in direct production. In case of purchase of finished goods from the manufacturer, you can ask directly to store contact information of contractors that specialize in this kind of work. If the goods purchased on the Internet or the contractor can not be found, and the house has all the necessary arsenal of tools, the installation of partitions can be made independently.

For it is necessary to strictly follow the recommendations below:

1. If the structure is made up of parts, it is necessary to pre-assemble. The process should take place directly in the room where you want to install. This is to ensure that there was no difficulty in moving oversized items around the house, as well as through doorways, which can be less than the structure itself.
2. If the composition of the product provided the door, then it is better to make the installation at the end of work.
3. Marking a partition mounting on walls and ceiling. Used for this purpose special mounting profile.
4. Drilling holes for mounting fasteners. Their depth should not exceed the size of the fasteners. Manufacturers of parts required size is usually sold as a set.
5. Direct installation. It is necessary to check the reliability and stability of the construction on its new location.

Useful advice!If the installation of the glass partition is expected in the immediate vicinity of the shower or bath, the junction of the wall to be processed sanitary sealant of silicone.

The process of manufacturing glass partitions for shower

Manufacturing of glass partitions involves special equipment, so make the subject at home is quite problematic. To understand the complexity of the process, enough to get acquainted with the order of his organization.

First, make measurements and prepare sketch. It should take into account that in the case of a partition from floor to ceiling is necessary to completely eliminate the slightest error in the measurements. Allowances are valid, if the design is not installed in the entire height of the room.

Ready for sketches and drawings of experts produced the project, using a design program. Further defined basic and additional pictures, which will participate in the creation of partitions. With a special equipment of a plastic or glass cloth is cut right size basis barriers, produce handling edges, and glue is applied to spraying the protective coating.

If the partition carcass, the required manufacturing step comprising the production of a metal or plastic frame. Assembly of products produced already in place, and immediately prior to installation.

Inspecting the finished partition, you should check its compliance with all necessary standards. After all, the quality of the finished product has a direct impact on its use comfortable and safe use of the bathroom with a glass partition.

Manufacture of shower screens made of glass with their hands: step by step guide

Masters who do not have relevant experience, it is not necessary to undertake such a responsible and rather troublesome work. Especially when it comes to complex geometric designs. The maximum that can be made at home - is a direct partition or device with a pair of corners. Their increasing number of fairly complicate the process and cause some difficulties in ensuring tightness. In particular, this applies to products designed to perform the role of the shower.

Actually, the technology independent production of shower partition consists of several steps.

1. Calculations and measurements. As in the case of manufacturing a glass partition for the shower to order, you can not make a mistake in the measurements in the case of mounting from the floor to the ceiling or the butt from wall to wall. In these cases, you need to be as attentive and make measurements with an accuracy of a millimeter.
2. Creating a project. To this end, it is advisable to use a special program.
3. The choice of material. It is necessary that the metal carcass meet the requirements described above for use in the shower. The glass must have a thickness above 5 mm.
4. Cutting glass. With this task cope Only experienced craftsmen, and this can be done with the appropriate equipment at home. If this is not possible, it is best to seek professional help.
5. Processing cloth partition edges.
6. Acquisition fastening materials, a protective film and fittings.
7. Coating of glass with a protective film. This can be done by means of water, gradually expelling from under the coating, air bubbles and excess fluid.

Important!By selecting and cutting glass should be approached responsibly and competently. Its tested for strength and thickness, which must be at least 5 mm.

Glass partition for the shower: decoration products

Glass - a versatile material and in itself attractive. Make it even more beautiful, you can use different ways of decorating. The most common method - sandblasting. This treatment is carried out with a special apparatus, from which the air jet is directed to particulate sand certain caliber. Under the action of the pressure from the sand particles remain on the glass jagged traces - and it becomes opaque.

With sandblasting method and the use of special patterns of dense material on the glass mat are beautiful pictures or composition. In areas of the template fit tight glass remains transparent, and in the holes, it becomes opaque. If you take a few templates and adjust the pressure of the jet of sand, you can get a variety of patterns with dull colors.

If the jet with sand add a waterproofing paint, drawing the mat it will be made in the appropriate colors. Thus, the use of modern technologies for processing and connecting the master's imagination can turn a simple partition into a work of art.

Glass partitions for the shower: features of operation and maintenance of the glass

Easy to clean - one of the main advantages of glass partitions. Greatly simplifies the task of the existence of a special coating on the manufacturer, provides an easy window cleaning. In the washing process it is important to exclude the use of abrasives, using only liquid detergent compositions. If provided in the shower water filtration, the threat of calcium salt deposits on the glass is greatly reduced, and this accordingly makes maintenance easier.

Even taking into account the fact that the tempered glass used in the manufacture of structures for the bathrooms, quite durable and anti-shock in During the installation and operation of a glass partition should be observed orderly, avoiding abrupt movements and slamming doors (if available). During transportation and installation of end parts products better cover soft material. Work is recommended with the assistant.

Thus, elegant baffle has several advantages over traditional curtain in the bathroom. With it you can increase the visual space and make the room more functional. Installing matt walls in a niche area will limit the adoption of water treatment from the rest of the premises and make possible the simultaneous use of a bathroom with two family members. With appropriate experience septum can produce and install on their own, in another case it is better to use the services of experts and to produce glass partitions and shower on order.