Luke Tile pressure: how to choose the right model

In order to effectively and at the same time convenient to hide the utilities you can use in several ways. One of the best - the hatch under the tile pressure. He is very similar to traditional auditing windows, but in the case of correct selection it can be installed in almost imperceptibly. This article will examine what options you should pay attention before buying a hatch under the tile in the bathroom, kitchen or basement.

How does the hatch under the tile pressure

Installing auditing hatch is made in the event that there is a need to provide quick access to any utilities, for example, cables, pipes, meters, etc. The outer part of the hatch cover can be lined in the interior by any suitable method: painted, papered or even glued ceramic tiles.

Post audit hatches can be on any suitable surface, including walls, floor and ceiling. Also allowed the installation of plasterboard walls, inside of which are laid communication. Very often install such manholes under the tile in the cellars.

The mechanism opening / closing the hatches can be very different, from the simple (small lock and key to it or a magnetic latch) to the more complex - the pressing, which will be considered.

As for the shapes and dimensions of the hatches, there is much more choice and is not limited to practically nothing. There is a concept of standard sizes, which are in the range from 200x200 to 1200x1200 mm. Manufacturers have a lot of variety of models that are not only a square shape but also a round, trapezoidal, etc.

Components of the hatch hidden under tiles:

• Window frame having a certain shape;
• door, made of metal or plastic;
• opening system;
• locking system manhole cover or a conventional lock.

Pressure inspection door under tiles: Product Features

Trapdoor under the tile with a push system - this is one of the types of audit of windows, which open the system has been improved. This allows you to install them and quietly not to spoil the appearance of the premises. In addition, it solves the problem of mounting the hatch in the toilet under the tile, because usually there is very little space, and access to communications is always required.

In order to be able to withstand the load of the door, which will constantly provide him finishing materials, such as ceramic tile or mosaic, the system provides reliable hinges.

Installing hidden hatch under the tile has its own characteristics and the installation is carried out not as if it were an ordinary revision box. The thing is that trying to make invisible hatch, its set somewhat deeper wall covering to seal the tile and then on top of reaching full stealth effect.

Useful advice! In order to avoid having to spend time measuring and cutting tiles, it is advisable initially to pick up corresponding to each other the size of the hatch, and finishing material.

It is worth noting that the usual metal or plastic hatch under the tile does not fit. For a reliable fixation of the material on its surface coated with a special plasterboard plate. It serves as an excellent basis for fixing any material and at the same time able to withstand considerable loads.

Hatches flush-mounted under the tile are ideal for rooms where there is the need to install the audit windows, but it must be done in a prominent place. Hiding them behind a corresponding topcoat, they can be made completely invisible, blend and interior kitchen, bathroom, toilet, etc.

As for the opening mechanism, in this case it is as follows: lightly press outside triggers actuation mechanical latches that facilitate advancement of the hatch in the front direction. After that, the lid is moved to the side, giving owners access to all communications.

Buy hatch flush-mounted under the tile is worth more because it effective system allows hatch opening without damaging the tiles. This saves the aesthetic and functional aspects of the problem.

How to choose and buy the auditing hatch under the tiles: the main criteria

See the range, which is represented in the market, each buyer can get an idea of ​​the cost, as well as the main parameters of the products in question. The easiest way to do this is by visiting a large hardware store, where he offered several options from the most popular manufacturers.

When considering pretty soon it becomes clear that the main criterion of choice - it is the buyer's budget, since the variety of offers is extremely large. Buy Sanitary hatch under the tiles can be at different prices, which are very widely, depending on exactly how they work, and what kind of material was used.

Cheap hatchways usually made from thin sheet material, making it impossible to disguise under tiles. Their structure is very simple, and the cost is low, however, these hatches are best installed in inconspicuous places. If the aesthetic aspect is not important, you can buy the cheapest hatch Bathroom Tile.

By the mid-market can be attributed hatches, intended for concealed installation, but other than a simple opening system. In this case, the access door is held by conventional magnets, but it is possible to mask the cover tiles. opening system in this case is a handle mounted or special sucker.

The greatest value of pinch characterized hatches, which are the most technologically advanced one audit windows. However, almost all the users who have made a choice in favor of this decision, claiming that such expenses are more than justified. According to them, the simplicity and ease of use of products of this type surpass all expectations.

Important! No matter what type of hatch will give preference to the owner, his presence will greatly simplify repairs and regular checks provided for operation of domestic rules communications.

Hidden hatches under tiles: sizes and prices

Wanting to buy a hatch hidden under tiles, each owner is trying to find the most suitable option, focusing on performance and cost models. Let us consider how to determine the size of the hatch hidden under the tile, and what determines the price of this product.

Before you buy a pressure hatch under the tile, you need to perform the following work:

• you first need to decide exactly where the door is located. As its main task - to provide free access to communications, it is necessary to place it accordingly;
• then you need to measure the width and height of the tile, which is used for the walls;
• based on the size of the tiles, their calculated necessary number to close the opening;
• width and height of the hatch for the tank under the tile can be calculated by multiplying the required number of tiles on their size. These simple math will determine the appropriate size of the hatch.

The price range for the push hatches is extremely large and starts from a few hundred rubles. The most advanced and functional models can reach at a cost up to 16,000 rubles, if it comes to the manufacture of custom-made. Usually, if necessary, to make the door a special size or shape, first cause gager. After data transfer, the firm proceeds to manufacture, that can take an average of from 3 to 10 days.

Useful advice! One of the arguments in favor of the commission of an individual order for the manufacture of the pressure hatch - obtaining manufacturer's warranty of 12 months.

As practice shows, Tile hatches can last for quite a long time, if you follow some expert advice on the selection and operation of:

• If the door has been installed in the opening, it is strictly forbidden to have on the surface of its cover significant pressure. This can lead to deformation, which further does not allow the hatch to close fully;

• if the single-wing mounted hatch pattern, its width should not exceed 70 cm. If this amount is not enough to close the opening, it is better to use two doors;
• can not by its own decision to mount pressure sanitary manhole under the tile on the floor. While not designed for this, he quickly goes down. For this there are special floor hatches for tile with shock absorbers;
• in must during transportation and storage of the hatch in a vertical position to avoid deformation.

Sizes and prices invisible hatch under the tile:

Manufacturer	The size of the hatch, see	Material	mounting type	Resists weight, kg	price, rub.
Revizor	20h20h4	aluminum	wall	n / d	1480
30h50h4	1860
30h30h3,5	steel	8	2750
Luker	40h40h4	5	3036
40h90h5	12,5	3861
Practice	20h40h4,1	aluminum	9	3890
Hammer	30h50h6	23	4800
60h120h6	72	7500

Pressure hatches Tile Hammer: characteristics of the best models

Products manufactured by Hammer are among the most popular today and are in great demand due to the huge choice of models. Among the variety there are two models that work using a pressure mechanism. Each of them a closer look.

Model pressure hatch Glory

It is very easy to install and easy to use option, which is known for its reliability and long operational life. "Glory" The cost is quite moderate, making it the leader in this category.

This hatch was used innovation, which later became the hallmark and we can say the main advantage of this model - an elaborate system of joints and connections. This solution makes it easy to open the door without the use of suction cups or pens.

In order to open the door, enough to produce a slight depression on the surface of the cover from the side where the latch. Closing is made by the same principle. In this hinge mechanism are arranged in such a way that alignment of the door and the opening takes place automatically.

Related article:

Ladder shower in the floor under the tile: a modern solution for the bathroom

Varieties of products, the installation location. Detailed installation instructions ladder with a list of additional building materials and tools.

Among other technical features of the model hatch Glory is worth noting:

• hatch can be installed on any type of surface completely;
• hatch cover capable of protecting the communication of moisture due to the presence of a special insulation layer;
• model has sound insulation properties, which is very convenient when it comes to the need for installation in the bathroom or the toilet;
• opportunity to renounce the use of handles and suction cup allows you to hatch completely invisible;
• for decorating the hatch can be used absolutely any material, including artificial stone and ceramic tiles, which have a considerable weight. The hinges are able to withstand a substantial load for a long time, it does not warp and will not become loose. According to specialists finish thickness can be up to 15 mm.

Useful advice! For this hatch model allowed fixing tiles larger than the actual hatch that can avoid troublesome trimming.

Also pay attention to the fact that the hatch Thank design can be improved Special gas springs, which provide the ability to opening of the door automatically.

Model push Zeus hatch

In this model, the developers have tried to keep all the advantages of the previous version, while slightly modifying the configuration and improve some aspects. In the first place, "Zeus" is known far greater durability and reliability has been achieved by adding additional stiffeners. Due to this design is capable of withstanding the enormous weight.

Permissible load on the door of this model suggest filling opening up to 1600h1600 mm. The thickness of the tiles, laid on top, can reach up to 15 mm.

Installing auditing hatch under the tiles with their hands

Set push the hatch is not difficult, and the task can easily cope beginner. The only thing you should pay close attention, because it is the accuracy of the placement of all the elements. After all, even small deviations can provoke distortions, which will not allow the tiles to stay properly. As a result - the door will be visible on the surface.

First of all you need to do the installation of the window frame of the Audit, which is mounted on a level with the wall and is fixed with screws on the inside. Usually, all fasteners are attached complete with silicone sealant.

In the process of fixing the tile to the wall surface, it is important to remain around the opening space, the size of which corresponds to the size of tiles, which will cover manhole cover.

Important! In order to securely hold the tiles on the surface of the hatch cover at least 70% of the area of ​​each tile to be adhered. Moreover, on the side where the hinges, the lining material must not protrude more than 4-5 cm. This is necessary for correct operation of the mechanism.

As for the choice of location of the audit of the window, there is only one requirement - the distance between the hole and the angle of the room should be at least 80 mm. Such a rule set in order to provide the sliding mechanism of a sufficient amount of space to operate.

Another important point, which is worth paying attention to in the course of work - grouting after the completion of the laying of tiles. Overwrite the seams around the hatch in any case it is impossible, as it immobilize the engine.

Installing hidden hatch under the tile in the bathroom, toilet or kitchen - it is an opportunity to provide comfortable access to all communications and it does not spoil the interior of the premises. Choose the right size of the hatch under the tiles, it can be made completely invisible to others, which is important to preserve the aesthetics of the room. A technical characteristics of these products, as you can see, are not only equal, but even superior to all other options.