How to whiten your bath with your own hands quickly and efficiently!

Even the most expensive and high-quality bath made over time loses its shape and covered deposits in operation. They can be in the form of dark spots, white crystalline plaque or yellowish streaks and marks. They are united by one thing: they spoil the snow-white color of the bath. What is the reason for the emergence of these impurities, so that spoil the appearance of the sanitaryware article?

pollution Causes

Not all owners baths know that even such a simple subject bathroom requires special conditions of care. However, the adverse factors can not depend on the hosts. These may include:

1. Regular cleaning baths abrasive cleanersAs well as the use of stiff, including metal brushes. Enamel or acrylic surface is covered with small bumps and scratches. They have rough edges and the bottom, so they can be easily clogged with dirt, but remove it from there difficult.
2. water quality. Unfortunately, in most regions, though water is cleaned in special stations remains poor quality. Water with a high degree of rigidity limescale forms. They suffer from them not only the bath, but also taps, shower heads and toilets. Water passing through the old pipes, rust can post a plaque - hence the same yellowish color of the old baths.
3. Soap solutions and organic. One should not forget that the bath and spoil what it is. Soap although it is in itself a cleanser, can also form a plaque. Organic compounds that fall into the water while we take a bath, and later deposited on the walls and bottom.

A bleach bath with his hands

If you look at his bath suddenly you realize that more can not continue, come the turn of events bleaching. All methods can be divided into three large groups:

• factory household products that you can buy in the store;
• homemade formulations for utilizing means available;
• radical methods - update enamel or acrylic liner.

The most radical method - the replacement of the bath, but this is an extreme step that dare not all - it is troublesome and expensive.

If you go to the supermarket household chemicals, you will see a lot of cleaning products with whitening effect for products of sanitary ware, acrylic, enamelled steel and cast iron. All of them come in liquid and powder form. Powders should be used with caution, as they have an abrasive effect. It will not tolerate any acrylic surface or new steel bath with a thin layer of enamel. Their application is justified in old iron bath, wherein the enamel layer is thick and heavy pollution.

Remember that if you apply a powdery agent, it then will need to use all the time, as the only solid particles in its composition will be able to remove dirt and deposits from scratches microcracks.

Liquid and gel-like vehicles have a sparing effect. They whiten the surface due to chemical components. According to numerous reviews, the best result can be obtained using means which are composed of acid, e.g., hydrochloric or phosphoric. Should not be afraid of what they do harm - balanced composition is selected in such a way that the tool does not get the highest hazard class.

Among the folk remedies have few proven recipes that will help restore the bath to its former whiteness. The works can be carried out one by one, to enhance the effect.

Step by step instructions for bleaching baths

Step 1. A mixture of normal food and soda ash are mixed, this mixture was dipped in a damp sponge or cloth and rubbing the spots and streaks. In this state, the treated bath leave for a couple of tens of minutes. Then place the food sprayed with vinegar, and again rubbed with a sponge, and then rinsed with water. The work is best done with gloves.

Step 2. Take vinegar essence 70% Fortress, moisten the cloth in her right size fabric and attach to the place where hard water and rust left their traces. It is best to leave it in the plumbing overnight. By the morning of stains and calcium deposits dissolve.

Step 3. The granulated food citric acid dissolved in a little water in a steel container. The solution was put on fire, and bring to a boil over low heat. Soak the sponge in a solution process with enamel stains and stains, then rubbed with a brush and rinse with water.

The most serious option - it is a complete update of the enamel layer or applying a liquid acrylic. Anyone who does not want to wait a long time and feel in the apartment unpleasant smell, can order acrylic insert into an existing bath.