SHARE
in social networks
Quality, properly fitted goal, Not only the housing question of safety, but also the appearance of a private home. They are an integral part of the plot and should easily fit into the overall design, and also in harmony with the other buildings. The modern market offers the consumer a variety of options from different materials, with the most modern control systems and without them. Basically it is reliable, durable, attractive appearance gate model for the private home. Photos showing all the positive qualities of such structures are shown below.
Gate - a kind of business card of a private house
Content
- 1 Forms for the gate of a private house. photo samples
-
2 Construction of the swing group entry
- 2.1 Installing the supporting pillars
- 2.2 frame assembly
- 2.3 Fixing corrugated
-
3 Construction of sliding gates
- 3.1 Video sliding gates
-
4 Gate automation for private homes. Photo resettlement options
- 4.1 Photo gates (video)
Forms for the gate of a private house. photo samples
Gates are divided into several types depending on the material manufacturing and the opening / closing options. They are:
- swing;
- sliding;
- lifting.
Wooden entrance gate
In recent years, the most common variants of steel metal structures. For cheaper arrangement can use conventional corrugated board, as for a richer and luxurious - combining solid metal forging elements. However, the gates of the wood also look pretty good.
Examples of layouts to choose gate design
Construction of the swing group entry
This is the most common type of doors for private homes. Their arrangement is possible if there is free space, allows to open the sash without any problems. Modern swinging open constructions are metal frame, which subsequently is coated with metal, floorings, tree or special sandwich panels.
Modern Metal swing gates
Installing the supporting pillars
perfect for support profiled tube 100x100. To install them dug wells, in which fill with gravel and sand, creating a so-called pillow. Prop fixed in such a well spacers embedded in the concrete with the addition of coarse gravel.
Important!may be insufficient to complex clayey soils the like pillars. In such situations, the supports are welded extra jumper at a depth of about 40 cm.
The most common type - swinging wooden gate
frame assembly
Carcass frame using 60x30 tube. For rigid crosspiece, which is welded into the finished frame, whichever smaller cross section metal profile, around 40h20. Along the edges of the frame are welded hinges and bow for lock and bolt. Upon completion of the assembly welds necessary to grind grinder, and then apply a primer and paint.
Forged gates for private homes
Fixing corrugated
If the sheathing is used corrugated board, it is best to fit the brand C8 or C10. Most convenient for cutting profiled sheets used grinders. Her to wear special abrasive disks without spraying. Mounting cut to the size of corrugated board produced using rivets klepatelnogo tool also allows mounting screws.
Important! Laying sheeting should be overlapped by grabbing one adjacent wave element.
The circuit arrangement of the gate of corrugated board
Construction of sliding gates
Not all situations can be installed swing entrances. When opening the flaps up little space, use a sliding type of construction. Basically, sliding systems consist of a single leaf, which is manufactured by the same principle as a conventional swing gates for private houses. Photos of these samples demonstrate the convenience of their operation.
sliding gates
To design could move equip special rails and the lower part of the sash is welded rollers. It is also necessary to weld the top of the guide, which is designed to lock the sash in position.
The circuit arrangement of sliding gates for private house
Operation of the gate rail difficult in winter, because the moving parts may become clogged with snow or ice. During snowfalls require thorough cleaning of these elements, as well as the area around. Also along the gate leaf is possible to lay the heating cable, which melts the snow, limiting movement.
Video sliding gates
Gate automation for private homes. Photo resettlement options
Manually open and close the sash is not to everyone's taste. For this we have to get out of the car, then sit down again, it spent a few minutes of precious time. It is much easier to press a button and the "casket" opens itself.
The scheme of the automatic opening and closing of the gate
You can automate the swing and sliding gates. For this special experts linear and lever actuators have been designed to allow the flaps to open on their own. Other systems consist of an electric motor, rack, through which the gears transmit force to the Gate leaf.
The drive itself is mounted on rails. On rack mounted limit switches, and on poles - photocells. The handy remote lets you easily and quickly open goal straight out of the car without making physical effort.
Related article:
A fence of corrugated board with his own hands from the bars: technique, assembly secrets. Properties, types, use of metal sheets. Materials and tools. Variants supporting fence posts.
