Can we put linoleum on the linoleum: finding the right solutions

Linoleum - the most popular floor covering. One of its main advantages - ease of installation and removal. His replacement can easily produce their own, having a minimum construction skills, with a small number of instruments. When it comes to resurfacing, there is a logical question: can we put linoleum on the linoleum. The answer to this question and the recommendations for the use of this technology provides this article.

Is it possible to lay linoleum to linoleum: the permissibility of the use of technology

The expediency of laying linoleum over old primarily depends on the state of the previous coating and the quality of its assembly. In order to make the right decision in a dilemma whether to lay linoleum to linoleum, it is necessary to check the suitability of the old coating. Experts do not recommend to use this technology in a number of cases, as described below.

Goodbye, without hesitation, the old coating is worth it if installation was done several decades ago, for example, in the era of the mass of Soviet construction. Coverage in those days produced fabric underlying cause, which during the years of operation is significantly worn out and become a place of gathering dust. A lot of dirt and bacteria could be formed over a long period and in the seams of linoleum without a base.

Unequivocal dismantling subject to tiled linoleum. The slits located between the old tiles may eventually appear on the surface of the new coating, which adversely affect the aesthetic appearance of linoleum and significantly reduce the period of its durability.

Arguments about whether it is possible to lay linoleum on the old linoleum, should not arise in the case of peeling the coating from the rough base. This is a compelling reason for the dismantling of the old material.

Why is not allowed laying linoleum on the old linoleum with a rough surface: arguments

The most compelling reason for the removal of old linoleum - a surface roughness. In the presence of waves, holes, dents and other significant defects forming reliefs better coating removed. In accordance with the technical regulations for the application of floor coverings, horizontal two-meter surface area in any direction of the vector may have deviations which are not exceed 2 mm.

In the presence of the uneven surface is unacceptable as the laying laminate on linoleum and PVC tiles. Seams and attractiveness of the elements will not help mask the pits and ridges. On the contrary, the elastic material will contribute to a strong release of unsightly places.

A convincing argument in favor of dismantling the old uneven linoleum - is the increased wear of the coating caused by the difference in the loads. In addition, to move across the floor, which is thoroughly repeats is not the ideal form of a precursor, is unsafe. In the end, the hosts completely disappoint the visual perception of curved floor and immediately the question arises about the new repair.

Important! A similar linoleum on the linoleum can be placed with the proviso that the finishing coating layer will have a basis.

Stacking unacceptable sports linoleum on the old coating. For this type of base material should be perfectly flat, rigid, requiring the complete removal of old coating and repair of a base. Photos of linoleum in the hall for sports showcase, should look like the surface. On the old surface will not be able to achieve this effect. Permission is laying linoleum on plywood, but only if the average load on the floor, that is, premises intended for yoga, fitness, aerobics, and not for the game of basketball or volleyball.

Can we put linoleum on the linoleum and in good condition

If the linoleum, which is supposed to the surface is new, yet old, and is in good condition, it is not necessary to clean up. The more that will make it difficult, if securely linoleum glued to the floor. After dismantling the need to re-align and clean the surface. No need to remove the coating that is perfectly laid. It is enough to check the status of specific indicators and prepare the surface.

To this end, we first need to completely free up room on the furniture and other items. The coating must be thoroughly cleaned of debris, dust, and other contaminants. Next linoleum inspected for integrity. Cuts are allowed - they can be eliminated with the help of the mounting tape.

The next step - dismantling the old baseboards. In this case, check the evenness of the surface near the wall, prepare it for laying new pavement. Furthermore linoleum, linoleum can be laid and laminate tile, but on the condition that the previous coating must be level, clean, without significant flaws.

Old material is a good insulating layer and serve as a leveling surface, which significantly reduce the expenditure of energy, time and money required for the alignment procedure that is required in the process of laying a floor coverage.

It requires a special approach the question of whether to lay linoleum on the floor heating. Here we must take into account not only the state of the basecoat, but also the life of the heating system. You may need to change is not only flooring, but also the heating installation. Mounted warm floor is not recommended over the old linoleum.

Features and benefits of the technology laying linoleum Linoleum

Thus, in making correct decisions as to whether it is possible to put linoleum on the old linoleum, should be guided by such criteria as flatness, purity and integrity of the base coverage. If previous material meets the requirements, such styling is not only feasible, but also has a number of advantages:

• It does not require physical effort to dismantle the old coating;
• eliminating the need to make the floor screed and prepare a basis for laying the new material;
• significantly increased noise and heat insulating quality flooring;
• two layers of linoleum practically exclude ingress of moisture into the room;
• a bilayer coating makes the floor softer;
• Technology laying new material over the old linoleum helps save money.

Useful advice!Wide cracks on the old floor covering can be eliminated by filling them with silicone sealant. The material is applied to the surface of a soft rubber spatula and give it time to dry.

You can also save money on buying a plinth, to use the old, if it is well preserved. However, connecting bars on the old plinth should be replaced with new ones.

Laying linoleum Price: cost components

Technology laying linoleum linoleum significantly reduces the cost of works on the floor clearance. What is the reason, we shall understand below, highlighting the specific cost components. installation Price includes:

1. The cost of the material, which includes, in fact, the price of linoleum and rough ground. If the coating on the finished trail basis, particularly in the old linoleum, you backing You do not need to buy. This cost item also includes the cost of the adhesive, and other consumables.
2. Price can be formed on the basis of the cost of work on 1 man-day or prices for 1 m². It is worth noting that the price per square meter is taken into account the cost and quality of the material itself. More expensive than linoleum, the more expensive it will work on its installation.

Directly mounted volume includes all stages - from the preparation of the base to the mounting plinths. Customer also need to determine the performer of the works. Installation is better to trust a proven specialized firms in order to avoid fraud and to get high quality. But the cost of such packing will be much more expensive.

If the base is the foundation of the old coating, it is quite possible laying linoleum with his hands. Step by step instructions will guide you through all the work quickly, efficiently, and most importantly - free.

The total cost of laying linoleum: the price per m²

The cost of laying linoleum on the basis of such components generated per square meter:

• preparatory work, which includes the dismantling of old linoleum, leveling the surface and even removal of furniture;
• type and class of linoleum;
• the total area of ​​the premises.

Prestigious companies offer different price lists for services that include direct costs of linoleum flooring. Price per square meter in this section ranges from 150 to 250 rubles. The most expensive is worth laying Commercial linoleum - from 220 rubles per square meter.

To add the calculated amount of the cost of installing and connecting the plinth profile (an average of 100 rubles. per meter). The cost of the preparatory work includes:

• the dismantling of the previous linoleum (80 rubles. per m²);
• the dismantling of the old baseboards (an average of 30 rubles. per meter);
• alignment surfaces using self-leveling floor (500 rubles. per m²);
• surface primer (50 rubles. per m²).

If used as the base the old linoleum, the savings per square meter is about 650 rubles. The room is 10 square meters, so you can save up to 6000 rubles.

Useful advice!If your own is difficult to determine the order of work and their total value, it is possible to order a pre-osmechivaniya service. In this case, the master will have to pay 500 rubles for a visit. Construction firms, as a rule, then this amount is subtracted from the total cost of the work.

Laying linoleum with his own hands: work steps, necessary tools

How to put linoleum on the old linoleum, whether you can do it yourself, be discussed in this section. The general order of work provides for the acquisition of materials and tools, training grounds, nesting material and, in fact, cover the installation. Direct stacking linoleum includes the following stages:

• cutting the material;
• packing and fixation;
• -rollers;
• processing and welding seams (if necessary).

At each stage, you will need a specific tool for laying linoleum. Therefore it is better to take care of the presence of devices:

Related article:

The floor under the linoleum on the concrete floor: preparation and laying

Installation of underfloor heating different modifications, the calculation of necessary materials, step by step instructions paving.

• long steel line for cutting and trimming accuracy;
• roulette;
• pencil;
• Construction of knives with different detachable blades for cutting linoleum, for breaching round holes and cutting along the walls;
• spatulas for application and leveling adhesive;
• a roller for pressing the material and remove air bubbles, the board and the vanes for lapping linoleum in different locations;
• tools for cutting and welding seams.

Advance preparation of all instruments will contribute to the efficiency of work, and their proper use will provide high-quality laying linoleum and allow to achieve a good result.

Selection linoleum laying over the old coating

Stel thin linoleum the previous possible only provided that the old coating unit, whereby there is not risk of discontinuities flooring in areas with differences. Therefore, for the application of this technology is best to choose linoleum with the substrate. The strength of the substrate must be sure before buying. In addition, you need to determine the structure of the linoleum flooring as better to choose a homogeneous rather than heterogeneous material.

On homogeneous over time, can form white stripes, arising out of violations of manufacturing technology. Avoid such unpleasant consequences can be if when purchasing linoleum corner bend the material. If a white stripe appears on the curve, it means non-observance of production technology. High-quality linoleum on the curve should not change color.

Accordingly, it has the highest quality commercial type coating, but it is much higher than a semi-commercial or domestic. In this regard, it is necessary to take into account the traditional requirements for the selection of linoleum: permeability and susceptibility of the material premises to various mechanical influences.

If you need additional noise and heat insulation, it can be achieved with linoleum with a foam backing. In addition, such coating well eliminates minor irregularities. Linoleum protect from the effects of high heels and deformation under the furniture will help a felt type of substrate.

It provides the highest degree of soundproofing carpet. But the material is more difficult in installation and maintenance. Therefore, choosing what is best - carpet or linoleum, you need to weigh all the "pros" and "cons", comparing the qualities of both types of coverage.

Can we put linoleum on the linoleum: the sequence of work

Depending on the type of substrate, various methods for its preparation, but similar requirements imposed, their performance depends further operation of the floor covering. At first, the room should be thoroughly prepared. For this, the surface is cleaned of dust and stains. It is important that neither mote left. Then degrease the surface and allow it to dry.

Useful advice! During the works, humidity of the room should not exceed 65%. Optimum temperature - from 18 to 24 ° C. Linoleum before laying need to spread out in the room for a couple of days, so that he "acclimatized" and cracked.

This is followed by the cutting process. To this end, it is desirable to make a plan of the room and move it to the cover, do not forget to make allowances to 5 cm on all sides.

The next stage of installation - fixing cover. The question whether it is possible to glue the linoleum on the linoleum, experts endorse the use of glue are also advised to use masking tape or a special mastic or synthetic rubber-based. Particularly effective are the means for attaching covering without base.

Glue linoleum covering similar conventional manner. It is desirable to lay on the floor a solid material to avoid seams. If this is not done, then it is best to connect the joints by cold welding. Under baseboards necessary to leave a gap of 1-2 cm, thereby avoiding cracks after drying.

Is it possible to lay laminate linoleum: the admissibility of works and features styling

During installation, the floor covering and dismantle the old owners often wonder whether it is possible to lay on the linoleum laminate. It is practical and wear resistant coating, but the misuse and laying easily lead to damage to the surface that requires regular replacement. In any case, it is necessary to put on a perfectly flat surface, this form of old linoleum can not have.

Therefore, the question whether it is possible to put laminate linoleum, it is better to consult with experts in each case. At the same time there are a number of specific conditions, observance of which the quality of the laminate assembly depends:

1. The base on which is laid laminate, should be smooth and even. On the surface variations are permissible to 3 mm.
2. Linoleum, which is supposed to laminate floor installation, must have a high degree of strength.
3. It is necessary that the humidity floor, to avoid deformation of the material does not exceed 2%.
4. Linoleum surface must be intact, sealed, with no blistering.

Is it possible to lay laminate linoleum: the arguments "for" and "against"

Compliance with these conditions guarantees a number of positive aspects, resulting from laying laminate over the linoleum. In particular, increase noise and thermal insulation characteristics. The technology will significantly save time and money required for the purchase of building materials.

The negative side is that the unstable decorative laminate layer requires installation on a firm solid base. Poor fixing linoleum can lead to the formation of convexities and rupture of the upper laminate layer. Eliminate such a defect is possible only by complete removal and laying of the new laminate. Therefore, it sets out such work, it is necessary to analyze all the risks and make the right decision on the issue of whether you can put laminate linoleum.

Useful advice!Mounting laminate coating - more complicated process than laying linoleum, so better to trust in the art. In the case of independent work must adhere to a specific algorithm in solving this problem.

The technology of stacking the laminate on linoleum includes the following stages:

• the calculation of the required number of laminate and other materials;
• compiling stacking scheme;
• purchase coverage based on stocks in crop and manufacturing defects;
• acclimatization coating indoors;
• preparing a substrate;
• Laminate fixation.

Thus, laying linoleum and laminate over the old linoleum is quite acceptable. The main thing in this issue - the state of the basic fundamentals and the strength of the new coating. Compliance with the rules and recommendations of the above will allow for laying their own, considerably while reducing the financial acquisition costs of support materials and tools for leveling foundations, as well as give an opportunity to save on payment of work professionals.