How to lay tile to the floor laying techniques and technology features

Laying tiles on the floor - an extremely popular solution for the design of many buildings. However, not everyone knows that the tiles can be laid in various ways, and in the process of working with different bases is necessary to take into account certain nuances. Consider how laying tiles on the floor: methods styling features of the technology and the specificity of selecting a suitable material.

How to lay tile to the floor laying techniques and a detailed description

Many owners are paying a large amount of time and attention to choosing a suitable finishing material, focusing on its color, texture and size. Of course, it is extremely important to choose a tile suitable size so that it is commensurate with the room, but a matter of choice and laying method should not remain on the sidelines. Consider all popular options.

The traditional method of laying tile on the floor: the rules and features

The traditional way got its name because it is used several times more likely than all others. Such popularity is due to the ease of installation, as well as the ability to use as a tile square and rectangular shapes. In this case, the elements are stacked in rows parallel to the floor. It is extremely important to have them as close to each other and adhere to smooth arrangement of lines.

Useful advice!To give the traditional method of laying an unusual appearance, you can use colorful tiles. This option will make the cover original, but it will keep the high speed of all the work required.

Despite its simplicity, this method, like the rest, has certain nuances that you need to consider before laying work will be started:

• all defects, irregularities and other manufacturing defects will be very noticeable, if the tile is laid in such a way. So you need to either carefully inspect each item and eliminate inappropriate or choose another, less demanding method;
• if the lining is made with tiles of the same color, then the cover will look pretty monotonous. We can not say that this drawback, but it's worth it to take into account;
• This option is suitable only for seamless tiles.

While laying tiles on the floor in the traditional way it may well be carried out independently and in the absence of special skills, will still have to pay attention to the uniformity of the masonry, as well as the size of the joints (both vertical and horizontal).

How to lay tile on the diagonal: the most beautiful way of laying

Laying tiles on the floor diagonally, the most beautiful of all the options can be called by right. But at the same time, the technology of its styling is the most difficult, although at first glance it may seem that the foundation is a simple traditional way. The main difficulty in this case lies in the fact that it is necessary to perform an accurate layout of the diagonal axes, which will serve as reference points for the tile layout.

Moreover, a lot of time and effort will require the correct cutting tiles, which also presents additional difficulties in the process of laying tiles in this way. However, by this method, it is possible to hide almost any surface roughness. In particular, this option looks good when facing the floor small rooms.

Important!In the process of laying the grid pattern should be located at an angle of 45 degrees, so that for the realization of this method is only suitable tile square shape. This is sure to be taken into account before to put the tiles in the bathroom in this way.

Interestingly, the pattern itself is quite self-sufficient, and even with the use of monochromatic tiles, always looks extremely interesting. But before you put the tiles in such a way, it should be understood that in the process always gets a lot of scraps. And it can not economical to please the owner, who does not want to overpay for beauty, but when it comes to the need to visually expand a room or hide irregularities, this method is certainly best.

As already mentioned, the main difficulty of this method - settlement schemes diagonal. In addition, it is necessary to conduct a thorough surface preparation, dismantling the old paint, remove the paint residues and primed base before lay tile. So you can place the tiles exactly as possible, spending a smaller amount of glue solution.

Laying the first row is made the traditional way and it uses rectangular tiles. Thus the length should correspond to its diagonal diagonal square tiles to be used as core. Laying the second row is performed using pre-arranged tile triangles. After that, everything is quite simple - rows stacked on the principle diagonal layout of horizontal rows.

tiling technology to the floor with displacement (in Extension)

Perhaps most of all, this method is similar to the brickwork. Such a solution looks original and is used quite often. It is best in this case will look monochromatic tile rectangular in shape, although it is often found, and the use of square tiles.

When choosing how to put the tiles in the bathroom, you chose this option, it can be used to solve more two additional problems - to hide small defects, as well as to make a clearance sex interesting and original. But with proper selection of color solutions, tiles, laid in desynchronization, capable of giving a special room atmosphere. According to the recommendations of experts, the best way to design such facilities, like the kitchen or hallway.

As for the features of the technology laying tiles on the floor, it is important to know that the tiles be sure to fit the horizontal rows, and each element of the next row must be positioned so that its center coincides with the seam of the previous series.

Important!We can not say that the process of laying something essentially different from the traditional itself, however, there is one feature - the thickness of the seams have to be the same.

In an unusual decision, you can see examples where the offset styling is made diagonally, ie at an angle of 45 degrees to the wall. But in this case, it is extremely important to make sure that the surface has been prepared in advance and had a more smooth as possible. Otherwise, the desired effect is not achieved.

You need to start laying a location of Lighthouse tiles in corners of the room. So it will be possible to determine the level of the floor and fix the existing defects. Thereafter coupler is wetted with water and transferred directly to the tile laying with mortar. Make this series and the lighthouse.

Then masonry aligned with a hammer, and majachnye plate removed. After drying, which may take two to three days, the joints are filled with grout or cement.

How to put a tile on the floor "herringbone": Options and Technology

A method of laying a floor covering, "Christmas tree" is most often used for flooring. This embodiment looks very unusual, especially if it does not use oblong wooden elements and tiles. Naturally, that is suitable for this purpose only rectangular tiles.

There are two ways of laying tiles "herringbone":

• simple, which is no different from how it is done in the case of laying parquet;
• to attach for which further use tile paste small size. Frequently used items of a different color or mosaic.

Apart from the fact that this method was originally designed for laying flooring, it can be concluded that the best is the coating will look at if its surface imitates wood. But for a tile that looks like stone, this option is not very suitable, as it looks in the end is quite unnatural.

In order to get the desired result and to lay tiles "Christmas tree", it is necessary in the process of stacking the elements rotate left or right depending on the diagonal tile layout. In this case, the amount of waste will be minimal in the stunning visual effect.

How to put a tile on the floor: a modular stacking

The modular styling - the perfect solution for those who are new to the issue of working with tiles. In this case, the method makes it possible to decorate the surface as the owner so chooses. One need only consider how to put the tiles on the bathroom floor, and design the most suitable figure to make some necessary calculations.

Perfect solution will be modular pattern for small spaces, the more so to find a suitable coloring and drawing can be on their own, given the characteristics of the interior. It is desirable to make as a more detailed view that includes an indication of the tile size, and location of welds.

Useful advice!If you do not want to independently engage in the development of the project, you can buy ready-made tile set and a scheme that shows in detail how to put the tiles in the bathroom with their hands.

The simplest solution is to use a modular effect as one large tile shows a lot of small elements of different formats. In this case, the main thing to observe the principle of the model grid - the same pattern should be repeated many times. With this in mind, we can independently decide how to lay tile in the bathroom is beautiful and original.

How to put a tile on the floor in an original: a way to "labyrinth"

The method of "labyrinth", or as it is referred to as "network" can be done in various ways, but in the end always impression intertwined bands within which is a square of a different color or shade.

To publish interlacing pattern stripes need to use a rectangular tile, and for the interior - square elements smaller.

Useful advice!In order not to be mistaken with the size of the tile in the purchase, it is best to immediately lay down one of the pattern elements in the store. So you can make sure that all the elements fit together and will look good together.

This method looks worthy in any room, but when it comes to laying tiles on the floor in the bathroom, then this option can be called perfect. Even with a small area of ​​the room and the lack of windows, a properly selected shade of yellow in combination with the pattern is able to create lighting effects and make the bathroom brighter and more comfortable.

Related article:

How to put a tile on a wooden floor: the subtleties of technology and recommendations

Stages of preparation and laying of tiles. Complexity and features of the process. Creating foundations and screeds. Thermal insulation and waterproofing coating.

You can also consider how to put keramiogranit on the floor. By using this material as the pattern looks very attractive.

Laying tiles on the floor, "Deck": technology and features

"Deck" undeservedly method used in the floor lining is not as often as others. After all, in fact, this way of paving perfectly simulates a deck board that makes the interior a certain mood. In this case, the tiling is done with an offset, and it is crucial that the distance was the same across the plane of the floor, without exception.

You may notice that this method is somewhat similar to a brick wall. This is true, except for the fact that the displacement of the elements must be made not on half of each tile, and only a small segment of it.

It is worth paying attention to the choice of color and structure of the coating. Opting tiles imitating wood and not having unglazed coverage, you can create a very convincing semblance of a wood floor.

How to lay floor tiles by the "carpet"

"Carpet» ─ is one of the finest options for tile laying on the floor, which gives the opportunity to decorate the room according to the theme of the interior, as well as their own preferences. The essence of this method is that you are using two, three or more colors of tiles, as well as border that surrounds the image on the perimeter.

How complex and beautiful "carpet" you can create depends solely on your imagination and skills to work with tools and materials. It is best to use this method on a sufficiently large area of ​​the room, for example, in the room or the bathroom of impressive dimensions.

How to lay floor tiles "Kaleidoscope" by

One of the most unusual ways to put the tiles in the kitchen - "Kaleidoscope". Just like the previous option, it allows itself to come up with a pattern that will decorate the room. But here it is extremely important to clearly stick to the plan, because the confused very simple elements. It is best to pre-raschertit floor surface properly, thus making it easier for a job.

Important!Another complication of this method - the need to prepare in advance perfectly level surface, since any unevenness will be very noticeable.

As you can see, the layout of the tiles on the floor - it's an art, to understand that it will take time and attention to detail. So it is necessary to consider all the options available, and to identify with their own abilities and preferences, begin to implement the chosen method of laying floor tiles.

Laying tiles on the floor: expert advice

Before turning to the features of laying tiles on various grounds, should become familiar with some of the recommendations, which provide experts. According to the allegations, taking into account these simple tips, you can significantly extend the life of the coating, making it the most durable and reliable:

• Preparation smooth base - the main task to be solved;
• prepared surface must be vacuumed again immediately before laying;
• the adhesive composition to be used for fixing the tiles, must be selected considering the level of humidity in the room, and which will operate;

• for any method that is more difficult than a traditional or diagonal desirable to conduct marking on the floor;
• for complex patterns, pre-cut tile need, then put on the floor surface, laid by a cloth to look at the result before the start applied solution;
• with a simple method of laying can begin with the angle, but in the case of the most complex figures need to find and mark the center of the room;
• liquid funds waterproofing for base pretreatment - ideal to provide a more secure fit tiles;
• before moving to the laying of tiles, it is necessary to wait for the complete drying of the impregnation;
• grouting tiles can begin no sooner than pass on the package period necessary to complete the adhesive dries;
• color grouting must match or be combined with the color of the tile to create a single beautiful floor covering.

Fundamentals of choice and laying of tiles in accordance with the interior space

Select the most suitable embodiment of tile can consider several examples finished interiors using this material. It is important to understand that in a residential area tile is almost always combined with a heating system, because otherwise, walk on the floor will be quite uncomfortable during the cold season. To learn how to lay tile in the bathroom, which provides for a system of floor heating, you need to read and watch training videos further.

When it comes to laying the floor tiles in the living room, the ideal option would be coated to mimic laminate. This is an appropriate option for a modern interior that harmoniously blends into the room of any size. In a large room is better to prefer a calm, solid colors that will not make the floor too colorful and tedious for a look.

If you want to put the tile on the floor in the bath, at the expense of a small area it is permissible to use more bright and original colors. Do not forget that the selected color and the texture of the coating can influence the perception of space. For example, glossy surface light shade will extend the premises, whereas the dark matte tile will work the other way around.

Before laying the tile in the kitchen, it is necessary to make sure that the chosen material is not too easily soiled. In addition, it is not necessary to acquire the slippery tiles as the kitchen floor is constantly exposed to contact with water, which can cause dangerous situations.

How to lay tile on the floor: features work with different surfaces

After reviewing the different ways of laying floor tiles and choose the most suitable option for themselves, we can safely proceed to familiarize with the intricacies of the installation procedure. Given the considerable cost of laying tiles per square meter, many people want to give up their own specialist services and do whatever is necessary. To do this, first of all, you need to stock up on tools that may be required in the process:

• building level;
• hammer;
• glass cutter, Tile or bolgarka;
• wire cutters;
• roulette;
• trowel;
• a pencil;
• sponge and clean rags.

Useful advice!It is worth to take care of the availability of personal protective equipment and to acquire a minimum - safety goggles that protect the eyes from dust particles generated during cutting tiles.

If in the process of mounting a need for profile cutting, for example, to bypass or riser pipe heating, then for this use tipped drill made of cemented carbide and abrasive string coating.

Also, in addition to the tile you need to buy special daggers that are used as dividers, glue mixture for tile, grout and sealant and silicone sealant. All this will put the tiles on the floor with their hands.

How to stack a tile on a floor made of concrete: particular training base

The first paragraph of the preparatory work that needs to be undertaken before placing the floor tiles ─ dismantle the old coating and cleaning the surface of all the available spots: oil, paint, grease, and so on. d. Then checks the existing base using a spirit level, as well as visual evaluation: if there significant damage, dents, cracks or height deviation, it must necessarily be done by a new cement-sand screed.

It is important that before you glue the tiles on the floor, the surface is hard and flat as possible. Otherwise you will have to spend on laying more adhesive and tiles laid on a soft base much more susceptible to damage as a result of stress: cracks, chips and just falling away.

Once you have seen as old screeds or made new, it is worth to take care of installing the thermal insulation material layer. This will reduce heat loss and reduce the consumption of resources spent on heating. Another option - arrangement of the heating system that is the best solution of all.

In the second case, the screed thickness shall not be less than 40 mm, and it is necessary to use reinforcing mesh for further strengthening the foundations.

If the concrete base is in an acceptable condition, or for some reason, make a new tie before bed tile in the bathroom is not possible, you have to work with what we have, all the depressions can be smoothed by means of a cement solution. But for the projections is best to use a chisel with which is relatively easy to bring down the interfering portion of the coating.

Also you can use to align the milling unit. In order to ensure reliable coupling base with the adhesive composition is previously applied primer layer.

All these methods of training relevant for concrete structures or monolithic slabs. But to put the tiles on the wooden floor is also possible. Let us consider how necessary to perform the installation in this case.

Laying tiles on a wooden floor: features of surface preparation

By the wooden base on which the planned laying tile, the same requirements as in the case of concrete. First of all the surface must be flat and solid. The presence of old, worn-out or rotten boards unacceptable, because it can lead to the fact that the coating of the tiles at some point just to fail as a result of the destruction of the base. Therefore, all imperfect boards need to be replaced.

Useful advice!If a good, at first glance, the board as a result of the load begins to "play", then you can eliminate this defect by stacking additional lags underneath. Although in some cases, it helps and easy replacement of fastening elements (nails or screws) with new ones. In any case, conduct the appropriate checks before laying tiles on a wooden floor, be sure to.

Another way of mounting a solid and reliable foundation for laying tiles in the case of a wooden floor provides the use of sheets of chipboard, OSB or plywood. In this case it is important that the material be resistant to moisture.

During the laying of such an additional layer is necessary to leave gaps between the sheets of about 5-8 mm to give a material able to compensate humidity drops without deformation surface. Laid sheets are fastened to the base by means of screws and opened with a primer layer before being put on the wooden floor tiles.

Given the fact that the ceramic coating is not breathable and does not allow air to penetrate to the ground, it is necessary to take care the existence of internal ventilation to the inside not created an environment conducive to growth and reproduction of harmful microorganisms. Thus, to put the tiles on the wooden floor, it is quite possible. The main thing - to give due attention to the preparation of the ground, and before putting tiles on a wooden floor, handle it with special protective means.

How to choose a suitable adhesive composition for laying tiles in the bathroom with their hands

Regardless of the type of substrate, method of laying is always the same. But to the choice of a suitable adhesive is to approach with special attention, since, depending on the surface to which it is applied, its composition should be different. Concrete floor adhesive should be used, made on the basis of cement. To prepare it, ready to dry mixture, you must add the amount of water specified by the manufacturer.

An entirely different adhesive is used when working with a wooden base. In this case, the adhesive solution has the consistency of mastic, which inter alia, can provide compensation for deformations resulting from changes in air humidity.

deal glue need with a notched trowel on the back of the cladding material. In this case, on the surface of the grooves must be formed. Then the tile is pressed against the floor surface and gently rap with a rubber hammer. For more information about how to glue the tiles in the bathroom, using a particular method of preparing the mixture, you can see from the photo or video instructions.

Rules and cutting of the tiles on the floor settlement

Virtually impossible to lay the tiles on the floor in such a way to avoid trimming and fitting material. Anyway, the material has to be customized to the required size at the edges of the room, or in areas where the heating pipe or plumbing. Particular attention should be paid to how to put the tiles in the bathroom, because in this case will require more complex cropping tiles.

Not always to adjust, you can use an ordinary glass cutter, as for the manufacture of floor tiles manufacturers commonly use more durable material than the wall. In addition, the thickness of the floor tiles is greater and, therefore, cut it properly is even more difficult.

In this case, it is best to use the grinder, which allows you to shape cutting, albeit with uneven edges. All imperfections admitted as a result of such trimming can be removed manually by means of special pliers (pliers).

The most convenient way of cutting tile - Tile use because with the help of all the procedures can be performed quickly and securely, and the edges are thus obtained smooth.

Important! Despite all the positive characteristics of a tool such as tile cutter, cut with the help of a thin strip (less than 10 cm) is impossible. In this case it is better to do it manually, using wire cutters.

It is important not to forget about personal protective equipment, which must be present in the process of cutting the tile. Sharp pieces, which, anyway, will fly in hand, can cause serious injury. Therefore, it is important to protect your eyes (and preferably the entire face) and wear tight clothes, which can provide protection.

After all the necessary elements of a tile cut and stacked with an adhesive, it remains only to wait for dry and wipe the seams. How it is done, this procedure should be considered separately in order to take into account all the subtleties and nuances. After all, from the final stage will depend on how long the result will serve to cover, and how hygienic it will use.

Grout tile joints on the floor: what does it do

In order to pay Mezhuyev grouting tiles due attention, you need to understand how plays an important role in this process is the question of its further exploitation. First of all it should be noted that the seams - a gap that remains between the elements after installation.

There are certain rules and regulations that specify the basic guidelines that need to be supported in the process. Thus, the basic rule - the more the width of the tile, the greater should be the seam. Usually it is from 2 to 5 mm.

The need for grouting due to several reasons:

• over time, the walls are subjected to natural shrinkage, so it will need some free space, the tile could be displaced without damage to the surface;
• due to the presence of slots in a dense wall, "breathe" walls;
• the use of a special composition for the grout to prevent the ingress of moisture and, consequently, the development of mold, fungi and easy accumulation of dirt in the crevices;
• by the presence of grout improves adhesion between the individual fragments cladding;
• grout has considerable decorative role. Correctly and neatly decorated seams able to mask minor defects tiles, such as nicks and chips. Furthermore, via grouting can hide the detergent.

Thus, the application of the compliance grouting technology in determining the life of flooring services, as well as how attractive is its look. It is therefore worth a closer look, on what basis should pick up the mixture and how to carry out all the necessary work on their own.

How to select a suitable mixture of grout

In order to make the process of grouting no problems, it is necessary at the outset to choose the mix, ideal in all respects. This slight, at first glance, nuance, has an important role, because it is worth paying attention to the following aspects:

The color of the grout - this is the main criterion on which most people pay attention in the first place. The color of the grout is capable of both positively and negatively affect the appearance of the coating. Universal version, which is almost always appropriate - white. But in combination with colored tiles, he does not give the feeling of a single sheet. For this. you can pick up the grout color as close as the color of the tile. Less likely to use contrasting colors, as to choose the right combination can be very difficult.

Useful advice!To obtain the desired shade of grout, you can simply add to the base mix the right amount of white color scheme.

The composition and properties of the grout also play an important role. Depending upon which components are included in the mixture, and this can be stucco, gypsum, epoxy resins, Portland cements and other, characteristics will also differ. Here you need to focus on that, what conditions have to face material.

So, for rooms with high humidity, for example, when it comes to the bathroom, the formulations, which include water-repellent components should be selected. If the surface is exposed to heavy loads, you should pay attention to the durability of the composition. The best solution - epoxy mixture.

The composition of the grout will vary depending on the purpose for which it was intended surface. For example, if we are talking about tiling the wall surface using conventional grout that can wear out over time with significant loads. For the flooring is necessary to get more tenacious mixture, designed for continuous contact with the shoes, furniture and so on. D. The main thing is to grout the structure was not loose.

The preparation technology for grouting tile joints on the floor

Today, production and sales of high-quality grout is engaged in a number of different manufacturers. This wide range allows you to choose the most suitable option for any given situation. On sale you can find two types of grouts: dry powder, ready-to-spray mass.

In the first case, the main difficulty is the breeding of the required amount of mixture poskoku understand how much it might be useful, it is not easy. Therefore, the best option - to raise the powder gradually, gradually using it as needed. Typically, manufacturers specify as precisely as possible on the packaging how much water must be added to obtain the desired consistency, but this can be adjusted independently, by eye to determine whether you received ustaivayte result.

The second option - a mass that is completely ready to use. Usually, it can be purchased at banks or small buckets. The main advantage of such a solution - no need to mess around with their own breeding and the ability to quickly perform all the necessary work.

The disadvantages of the finished weight in the first place include a short shelf life. For this reason, the remains of which have not been used, most likely, will have to throw out. Given this, it can be concluded that self-dilution of the dry grout mixture is more advantageous.

If there is a desire at all to save money on purchasing the grout, you might consider homemade. You can use the alabaster, diluted with water to the consistency of the plastic mass. The main disadvantage of this option - a small service life, because usually such grout is quite crumbly. You can add to strengthen the plaster mixture, but it is only slightly improve the situation.

As overwrite joints in a tile: Equipment applying the mixture

In order to put the finished grout in the joints and cause all this in proper form, required capacity, in solution which is poured, brush, building mixer and a sponge and small rubber putty knife. It is best to plant the grout gradually, in small portions, and in a small tank.

Useful advice! Using the mixer is only justified if have to work with a large area. In all other cases, to obtain the desired consistency of the mixture will suffice to mix it for a while spatula.

Procedure for applying the grout is as follows:

1. Tile joints with which to work, be sure to thoroughly clean the dust from the dirt and mildew. For this purpose a special tool provided.
2. Using a brush, presoaked in water, soaking the seams to improve the quality of adhesion between the materials.
3. Then you need to dissolve a small amount of grout into the prepared container.
4. Using a rubber spatula, the mixture is applied to the elastic seal so that the gap is completely filled. Thus it is necessary to implement additional compacting in order to avoid the formation of voids.
5. All surplus, which fell on the tile can be easily removed using the same spatula.
6. To prevent cracking in the future, at this stage in the seams need to grout with water.

Important!To ensure maximum protection against water and the formation of mold on the surface, the place where it will be laid plinth, recommended further treated with sealant.

It should be understood that the procedure for grouting on floors and walls is slightly different. While in the case wall covering sealing seams should be in the downward direction, for the flooring, the rule - the angle from the distal to the exit. Before starting work, can become extremely useful view training videos. Grouting tiles in this case will probably be carried out better.

To grout to fully dry out, it is necessary to leave it for a day. And then you can proceed to the final treatment of joints. To do this, use a special antiseptic agents, which are able to prevent the appearance of mold and mildew, protecting all vulnerable seat covers.

Anyway, when it comes to laying ceramic tiles on the floor, the moisture in a certain amount will accumulate on the surface and may eventually begin to penetrate the seams. To prevent this, use the epoxy resin. Its application - the final stage of the grout, which provides the maximum level of protection.

The final cleaning of the tile surface before use

In order to start using the coating, which was the result of work, you need to give it an attractive and finished look. The main task - as much as possible to remove all traces of the solution and the excess putty. Since rubbing seams is usually carried out in a number of approaches have been partially mastic tends to sink as a result of drying out, the surface cleaning should be carried out only at the end.

In order to effectively clean the surface, you will need a sponge soaked with water. Tiles should be rubbed to the grout, which is on the surface of the tile, a little soaked. Then, using a scraper or spatula of the same, all the excess can be removed. All stains are easily washed off with a damp cloth or sponge.

Useful advice!When laying tiles relief was held, then hold it clean with a sponge will be difficult. In this case, it's best to use an old toothbrush.

It is best to clean the surface prior to final drying grout happen, because then soften it becomes very problematic. Of course, even in this case completely remove excess is possible, but the process will take much more time and require a lot of effort.

Putty scraped completely dried very carefully, since the cause very easily damage the surface of the tiles, in particular if the tile surface gloss. With regard to the relief surface, there is remove pollution will be virtually impossible, so you need to do this as soon as possible.

Recommendations for floor covering tiled care

It may seem that enough to know how to lay tile on the bathroom floor to get a nice durable coating. But in reality, it is constant care - the key to long service tile.

In this case, you need to learn two basic rules:

1. Only the regular cleaning of welds can guarantee the absence of pathogenic bacteria and fungi. At least once a month, clean the tile joints on the floor. Exactly how to do this, everyone decides for yourself: you can resort to the use of special detergents or soapy water, you can also use vinegar or pineapple. For disinfection of surfaces suitable bleach. Furthermore, with the cleaning task wonderful cope steam cleaner.
2. If possible, you want to save the remains of grout, to be able to produce a regular grouting, which, one way or another need. Such a re-grout made as needed if the old joints darkened and cracked. In this case the old putty scrub, then treated with antiseptic seams, and a new layer is applied. If you want to eliminate even layer of sealant, it can be done using the blade.

By following these simple guidelines, and regularly paying attention to the condition of tile, can significantly extend the life and keep it in its original appearance. It is also useful to check out the online advice and feedback from users on how to clean up the seams between the tiles on the floor. Often you can find useful ideas and advice on the forums.

How much is to put a tile on the floor: service fees

If after you have fully familiarized themselves with how to correctly laid tile in the bathroom, the task still seems too daunting to you, perhaps it makes sense to seek help from professionals. Experts know exactly how to put the tiles in the bathroom, kitchen or hallway by any method and will cope with this task as quickly as possible.

So, it remains to find a proposal for the most affordable price. Put the tiles on the floor offer a variety of artists, but less than 550-600 rubles per 1 m², this service does not cost. Of course, there are a huge number of artists whose services are considerably more expensive, so there is a choice only for the customer.

In any case, it will be useful to get acquainted with the Privacy Policy, and if such costs seems excessive to you, it is always you can once again see and instructions, see about laying tiles on the floor video and try to do everything independently.

tiling technology in the bathroom: video instruction

For more information about how to lay tiles onto the floor, as well as the fact how to overwrite seams on the tile, in most cases without oscillations proceeding. However, it may be very useful and watching training videos, which demonstrates in detail each phase of the work and provided useful recommendations from experts in this matter.