How to hide the wires on the wall from the TV: how to disguise

TV, which is suspended on the wall, looks stylish and original. This option saves the total space of the room. In this case, an important question arises, how to hide the wires on the wall from the TV, which should be considered not only from an aesthetic point of view, but also for safety reasons. There are several solutions to this problem, as detailed in this article, which are suitable for masking cables from other office equipment.

Recommendations for installing the TV on the wall

Wall mounting the TV saves the total space of the room, he added spaciousness. This is achieved due to the absence in the interior of TV Stand and bulky racks.

Not every model of the TV can be hung on the wall. It all depends on the weight of the product and the material of the wall surface. It is also important to choose a reliable bolts for fixing the TV. The wall must be strong enough to bear the weight of the selected model. A suitable embodiment is a concrete or brick surface. If your TV is attached to a gypsum wall, should be further strengthened mounting location mortgage details. For installation device used special plugs and screws for attachment to the TV bracket.

Important!TV should not be placed near heating appliances or places where exposed to direct sun rays.

When mounting the device on the wall should provide sufficient clearance for its unhindered ventilation. If the device is embedded in the niche, must remain behind distance of about 10 cm, required for ventilation and cooling of the TV. This is particularly important for plasma display panels. A place for mounting is chosen in such a way as to exclude the possibility of glare screen that will create discomfort when viewing the device in the daytime, because the light from the window will be reflected in image.

Important!Deciding how to fix the TV on a wall, it is required to determine the location of additional equipment to it, to set the required number of outlets, as well as options to consider placing a hidden cable products.

Considerable importance is the height of the TV on the wall. The ideal location for this is considered the geometric center of the appliance opposite the eye level of the viewer. Such an arrangement is capable of providing the best possible perception of the image. In this case, it takes into account the height of the sofa or chair.

How to hide the wires on the wall from the TV: how to harness decoration

The most simple and original solution to the issue, as beautiful to hide the wires on the wall are various options for outdoor masking cable. It can be hidden behind the wardrobe, curtains, living plants. If under the TV cabinet is hanging wires should be placed in a vertical box, which will depart from the small shelf. Thus, it is possible to obtain aesthetic and functional design.

Good effect gives decorative panels made of plastic, wood, leather or metal. They may differ in different shapes and sizes, covering a wall completely or partially hidden only cable products. It has an original look decorative finish walls, lined with natural stone and artificial brick in the TV location area. Various design options are displayed in a selection of photos that illustrate how to disguise the wires on the wall from the TV.

Cables not necessarily need to make invisible. With the help of designer tricks they can be turned into decorative elements. To this end, special ducts are used, silicon caps of different configurations, different materials of manufacture and the color, and also shaped elements.

Useful advice!For attaching cables to the wall, you can use ready-made locks made of plastic, which can be curly or invisible.

To be placed in a loft can be used channels that mimic the masonry. Organically will look decor of small metal structures. In the high-tech style which is fit from Composition television branches, made in the form of tubes. Wiring in this case is fixed to the wall by means of nails or screws.

In the classic room to hang the TV on the wall by means of elements of wood. This design is also suitable for rural areas of country and Provence. The composition can be supplemented with butterflies, birds and flowers. It will be interesting to look a little fence with growing bushes.

How to decorate the wires from the TV to the wall: stylish design solutions

Of the wires can be laid on the wall of the original composition of certain subjects. However, that figure looks completed, cables must be long enough. The process begins with the deposition on the wall of the thumbnail images by a simple pencil. When deciding how to hide the wires in the kitchen, you should use figure twisting technology, which gives a nice visual effect. To do this, using the wires on the wall, you can lay out a geometric shape.

Important!When decorating a wall cables should focus on fixing elements that do not violate the integrity of the wiring and not to expose them to friction, which will accelerate the wear.

If the cable has a small length or complex pattern does not fit into the existing interior, can be performed using the original wire border. It looks spectacular branches of green plants, decorated with three-dimensional flowers made of paper. Using a television or a computer cable, you can create an imitation tree branches and decorate it with leaves. If the cable has a considerable length, it is possible to put on the wall of the outline of a tree.

Give the interior brightness and originality allow complex pattern on the wall, made of cable products. It is important to consider the color of finishing the wire so that it blends in with the design of the walls. Figure can be decorated using various decorative elements. It can be themed stickers, flower arrangements, handmade items, decorative threads and garlands. The photo shows a variety of interesting ways to the apartment to hide the wires from the Internet and other equipment.

To solve the issue, both in the corridor hide the wires will embodied in the life of an extraordinary option. It consists in the creation of wooden fence blanks, towering above the skirting, behind which hides the cable. All the elements are fixed to the wall with double-sided tape. For the original can be made multicolored fence.

Lovers of unusual design will appeal to set up on the wall of an imitation of the power plant, which is attached to the wire. Such an option would not only creatively mask wires, but also to create the basis for the education of children.

How to hide cables from the TV to the wall: the internal rules of disguise

How to hide the wires in the wall closed way? This embodiment involves the laying of wire in a pre-created channels. This process is carried out at the stage of repair facilities. The order of execution of works is determined by the base type.

For shtrobleniya concrete wall will need a Bulgarian or a hammer. Pre-standing cause the line of the wire. It should lie strictly in a horizontal and vertical direction, turning at a right angle. Diagonal gasket is not allowed. According to the intended route of two parallel strips made using grinders, the distance between which and the depth should correspond to the diameter of the cable stranding.

Then for forming the full cutting grooves must hollow interior of punch through. Using diamond bit should be performed under the outlet opening for the withdrawal of the antenna. Feeding points may be few, that depends on the amount to be connected to the television art.

In the prepared groove laid cables, pre-sealed with plastic brackets, thus it is necessary to provide sufficient tension cord level. The wires connected to the socket of the respective circuit. Next Stroebe with laid cable is sealed with plaster. After drying the surface to be primed and decorate finishing putty.

Useful advice!Wiring in the room can flow in conduits skirting boards, which simplifies the installation of the cable and provides instant access to it.

If the panel TV on the wall is represented with plasterboard, it is sufficient to perform two holes. The first is to be located behind the device, which will hide the wiring, and the second is at the bottom of the wall at the junction with skirting (for easy liner to the network).

Important!For the comfort is better to use a plinth with a special groove for the cable, which will provide convenience when pulling wires and eliminates the need to fear for his injury.

How to hide in the corridor leads from the internet and cable television, if the walls have decorative coating? In this case, the algorithm is wired as follows. With a sharp knife to be cut wallpaper. Material should bend in different directions. With the construction tool is executed in the groove wall. The resulting groove fits the cable. The opening can be repaired with plaster or clay. Next wallpaper ends are greased with glue and glued in place.

How to hide the wires on the floor or ceiling: the main recommendations

you can hide the cable above the floor. To do this, purchased special skirtings with masking niche for cable. Before you hide the wires in the plinth, removed his outer panel and cable products is removed in the resulting space. The panel is then set back. The advantage of this method is simple, quick and clean installation.

How to hide the wires under the plinth to the floor? For that is performed by the perforator groove in the surface. The cable should be laid in the corrugation. The channel is closed by means of a cement-sand mortar. If the floor is made of wood, removed the necessary boards. The channel formed wire was placed in a metal case. Another way is to create a new screed on the floor, under which laid cable products.

Important!If the cable is hidden in the floor, it must be placed in a special corrugation.

Cables can pass on the ceiling. If it is made of concrete, holes are cut in the same manner as for the walls. How to hide the wires on the ceiling in the case of the use of false or tension structures? This cable laying much easier to perform. Between the floor slab and ceiling created a space is formed, which can be arranged wires. This option is typically used to provide electricity for lighting on the ceiling. However, it can also be applied as a communication eyeliner.

How to hide the wires on the wall from the TV via the box

If the room has been repaired, walls under shtroblenie wiring for the TV would be impractical to do this. In this case, the best solution for how to remove the wires from the wall the TV will be using special boxes. The advantages of this method are very simple installation, aesthetic appearance, and compliance with fire safety standards. However, this option requires additional financial costs for the purchase of decorative boxes.

Decorative box for wiring in the wall can be made of plastic or metal. There are options, combined products. The box also made of wooden slats or planed boards. Structure can be left in its original form or color. Such an embodiment will fit into the classical or rustic interior (in combination with wooden furniture and other decorative elements).

Metal products are made of aluminum. This box is very effective and aesthetically pleasing. He will look harmonious and futuristic interior. Plastic box looks simply and succinctly. It can be presented in any color.

The work begins with the calculation of the required amount of material, taking into account the size of the room and the direction of cable products. The wires in the box must be free, so it is important to choose the correct size of the channel.

Useful advice!If desired, outer part of the box can be colored in any color that will blend with the wall finish.

Cable channel on the wall for the TV it is imperative to fix on the surface. This can be accomplished in several ways. The easiest solution is to use a special glue on the type of liquid nails. Such an embodiment is useful for a fixing box to the tile or other smooth surface.

Related article:

How to hang your TV on the wall: Tips for the competent installation

Choosing the optimal location, altitude and location. Which bracket preferred. Advantages of installation on the wall.

In the case of a wooden base or using an aluminum profile will be the right decision securing the cable channel in the wall by means of screws that must be located at a distance of 40 cm each from friend. If the box is fixed to the brick or concrete wall, in this case, you should use anchors.

Important!Joining the two parts to be by means of special channels of finished parts.

How to hide the wires in the apartment with the help of furniture

Wiring can be hidden behind a piece of furniture, which is located near the TV. The ideal solution in this case will be the furniture-transformer, which will be hidden for all cords and cables. In it there is a special area designed to accommodate the TV, which in this case may be fixed to the wall or to the rear of the furniture panel.

How to hide the wires under the TV? The optimal solution is a hinged panel with built-in niche for cable, closing the door. It not only hides the cables, but also becomes a functional element of the interior, for storing different things.

TV can be placed in a niche of drywall, which is part of the cabinet or rack. Behind it runs the wiring cables that will not be put on public display.

The problem of visible cables applies not only to the TV on the wall, but also a computer or other office equipment. The easiest solution to the question, how to hide computer wires, is to secure all communications under the table top by means of clips with screws or double-sided tape. The first step under the sink is attached an extension cord.

Before hide wires under the table, they should be collected into a bundle, they are fixed by means of binders. Further ligament is attached to the screws. How to secure the suit staple gun. With conventional screeds easily fixed cables along the table leg.

You can also use a special cover for the extension, which is attached to the tabletop. Original look ordinary terminals for wires along the back wall of the table. In the photo shows how to hide the wires from the computer under the desk or behind.

Helpful hints to conceal wires for your TV and other equipment

Before hide cables from the computer, TV, phones and other equipment in one place, should perform the marking of cables on both sides that will facilitate finding the right element. Order cords are not intertwined, it is recommended to use special ties.

Signal cables and data wiring must be laid at a distance from the elements of the AC power. This decision will help to minimize interference in the operation of equipment that may occur in the fault data, the noise in the columns, the image is poor. It is important to remember that the length of the video and the audio cable is important. The smaller it is, the lower the risk of interference, signal loss and other negative factors.

Important!The longer the audio / video cable, the better its quality should be.

The length of the optical cable has a large value. It is important to its quality. He should have sufficient flexibility and not be brittle. Computer cable laid with some slack. power cable must be laid with an optimum tension, eliminating cable slack space. You need to make sure that the wires are not kinked, as this may cause damage to the internal sheath of the cable.

In an open concealment of cables necessary to protect the wires from the fluorescent light. It is not necessary to use elements with the outer shell in the form of braided fabric, which quickly lose a neat and aesthetic appearance. Moreover, such a sheath is damaged cable may provoke inflammation.

The article examined various ways of masking wires. Some of them are quite simple to realize, while others need a more serious approach and implementation of large-scale events. Internal masking step suitable for repair work. In the case of cabling products in the design of the room should use an external wiring. To do this in DIY stores, there are many devices for a spectacular and original disguise cords appliances.