Decorative panels for interior walls

Decorative panels for interior walls: types and their characteristics

Make Wall panels of very different materials. They may be natural, but it is more commonly used artificial materials. A variety of shapes and sizes of wall panels can combine different types, creating original compositions, suitable for any interior. Different panels not only on the material, but also on its geometric form, method of mounting on the wall, the presence of texture and pattern.

In addition to these basic types of wall panels, there are also specific, which are used for the construction of walls and partitions. They may take the form of sandwich panels filled with insulation. Of them do

frame houses and garden.

Useful advice!During the construction of the frame country house, you can use ready-made insulated panels for interior decoration for the walls. Photos of these structures are often laid out in a network.

Decorative panels for interior walls are made of many materials. It depends on their consumer quality and cost. Consider the most popular materials used for the production of the fabric.

Wooden panels

They are created from a single array of real wood and varnished. Increasingly used alder, oak, cedar or maple. Sometimes to reduce manufacturing cost for such manufacturers are trick: the top layer is made of luxury wood, as a substrate of pine or spruce. The fibers of each layer are laid perpendicularly to each other, which prevents the deformation of the material. This type of panels perfectly fit into the interior of the dwelling, as it has an exceptional environmental friendliness. To a panel of wood was allowed to mount in wet areas, they need to be waxed. This type of panel has elegant outlook. Unfortunately, these beautiful panels are very expensive.

Useful advice!Using the style of the interior under the natural wood, it should be understood that an excess of wooden surfaces give the room too strict office look. Therefore, when mounting the wood panels you need to consider techniques that mitigate the negative moment.

Wall panels made of chipboard

This material is made from compressed wood chips and glue impregnated. A wood particle base trim veneer on top of a variety of finishing materials. Therefore, such panels have attractive appearance, sometimes inferior wood. However, the quality of these products is far from ideal. After all Particleboard It does not have the strength as solid wood. A particularly sensitive to humidity such panels, the penetration of which are simply delaminate.

Especially panels of fiberboard

Decorative panels for interior walls of this material have a high moisture resistance have been subjected to special treatment fiberboard improver this quality. Produce hardboard from wood chips and bark from the addition of paraffin, rosins, and pectolite. make the sheet panels usually made of this material. On the outside of the drawing sheet is applied in the form of patterns and realistic images even by printing. The interior design of this type of finishing material can often be found in the kitchen as the water-repellent apron over a kitchen unit. Framed by moldings, these panels look great.

Useful advice!Fixing fiberboard panels to the walls should be carried out not only the moldings around the edges, but stick to the wall the whole surface of the panel. Otherwise, the central part of the sheet may eventually swell, forming unevenness.

MDF panels for walls

Material made from wood chips, too, but only dry way. The process occurs at very high temperature with the achievement of high pressure. Thus urea resin binds all the material particles. It turns solid material which is not subject to chemical attack from the outside. Such MDF panel absolutely not afraid of water. This circumstance allows one wall coverings in bathrooms and lavatories.

Because of these qualities, panel PVC mounted in bathrooms, in various kitchens and bathrooms. they also often used for sheathing loggias and balconiesBecause such panels are not afraid of low temperatures.

PVC panels have a significant drawback - low environmental friendliness, it is not possible to use them in the living room. However, they have found their niche in a slightly different place.

Useful advice!The use of polyvinyl chloride panels for walls in the room bathroom It requires special specific approach. All joints and corners need promazyvat sealant to prevent moisture getting there. This will help prevent the formation of mold spores and fungal colonies under them.

If you think you used for interior trim panels for walls, photos that you like, then you need to thoroughly examine their properties and characteristics of installation. You must accurately represent to any room in your house, they will do, and which do not. If all of these nuances will be carefully taken into account, the wall panels faced with the surface will long serve.

Photos decorative wall panels
interior finish (video)

Adjustment of wall panels MDF (video)