Vinyl wallpaper on non-woven basis. How to glue right?

Gluing vinyl wallpaper on non-woven basis is quite simple

What is the vinyl wallpaper and where do interlining?

Vinyl wallpaper with a base of nonwoven fabric - high-grade material for finishing a new generation facilities. They are considered heavy wallpaper. They are made using a special technology of baking at high temperatures. Vinyl mass thereby becomes a strong and solid, with the necessary texture. The basis for the application of vinyl may be different. As such, before performing regular paper, but now using a special material - fleece. He, like paper, is composed of cellulose, but subjected to a special chemical treatment.

Thereby wallpapers for walls a similar basis have the following qualities:

• not deformed;
• do not change their geometry;
• tear resistant;

It is necessary to carefully remove all the old wallpaper from the walls

• are not subject to abrasion;
• photostable;
• can be washed;
• breathe well.

Wallpaper paper-based promazyvat necessary glue, as well as a wall. Much easier to glue wallpaper on non-woven backing. How to do it look at below, but first it is necessary to prepare in advance tools for the job, which may be required.

Cracks and dents on the walls need to putty

The tools needed for pasting room

Started by pasting the wall, you need to prepare yourself in advance wallpaperGlue for such a cloth and take care of the presence of the following tools:

• a bucket of glue for breeding;
• scissors;
• putty knife;
• plummet;
• roller for applying adhesive;
• rags.

Tools required for wallpapering

Also still need to pick up a surface to be cut wallpaper. For this purpose, easy to fit a normal table, but you can do it on freshly washed floor. When you purchase the glue necessary to pay attention: it must be designed for vinyl wallpaper on non-woven basis. How to glue and how to dissolve adhesive correctly, will be indicated on the packaging.

Important!Due to the quality of vinyl, some masters do not cut them in advance, and paste directly from the roll. On the ceiling are doing little overlap, which later cut off the building with a knife and bottom trim made on the plinth.

Driving Wallpapering

Vinyl wallpaper on non-woven basis. How to glue easily and quickly?

Stage finishes on which the Wallpapering - a rather crucial moment. On it depends the durability and quality of finish. Here are a few basic steps of this process:

• you must first examine the wall and make sure they are fully ready for pasting. Old wallpaper carefully removed. If not, you can use the spray to soak the remaining pieces. Cracks and dents need to putty;

Technology Wallpapering

How to glue vinyl wallpaper on non-woven backing. a little nuances

Priming the walls brings positive results - so the compositions adhere better to the wall. Also primer fills tiny cracks and pores, which significantly reduced adhesive consumption. Modern types of primers are composed of more antiseptic additives and prevents unpleasant mold and mildew.

Related article:

Video: plastered walls under the wallpaper with your own hands. Putty or plaster as well?different inides mixtures spackling nuances and characteristics of different types of surfaces.

You can be creative in the process of pasting, buying vinyl wallpaper on non-woven backing. How to glue - or rather, how to position the band, all of course know - vertically. But lately, the designers used a different way - wholemeal canvas placed horizontally. Thus less visible joints and often more original pattern is obtained.

Pokleit wallpaper web horizontally, it is possible to obtain an original combination

Important!When wallpapering and until they are completely dry you need to eliminate drafts, closing doors and windows.

As wallpaper glue on a paper basis. Video

Some subtleties of the process can be studied by looking at the following video. how wallpapering based on non-woven will be understood in detail.