Plastic panels for walls: photos, types and methods of installation

Plastic panels in the kitchen

Plastic panels for walls: photos of various kinds

In appearance, the plastic wall panels are divided into: mirror, laminated and decorative. They are all very different in color and texture. Figure may resemble white brickStone, wood or constitute panels with any image. In form, there are three very different types:

• Pinion plastic panels for the walls. They are reminiscent of the wooden battens. To the wall of their attached horizontally or vertically on a pre-mounted thereon brackets. These panels have a length of 90 cm to 3 m, a width of 13.5 - 30 cm and a thickness of 8 - 12 mm. Between a rack mounted using the tool joint "tongue and groove";

Different textures and colors of wall panels

Useful advice! Mounting rack plastic panels for walls

vertically gives the room a higher view. Horizontal layout visually lowers the ceiling and extends the wall. Knowing this effect, you can intelligently organize space indoors.

Plastic panels in the kitchen

According to the internal structure of the panel of the first two types are two flat mutually parallel surfaces connected by partitions, stiffening the entire structure. The lateral ends are formed as tenons and slots for interconnection.

Wall panels in the room decoration

Since the active material is made of a polymeric material, it is water. The panels are very light and do not need an extra robust design. The upper protective layer allows durability to the drawing which is applied to the surface of the material. Protection does not allow the material to deteriorate due to exposure to harmful external factors. Plastic panels for walls, photos of which occurs on the network in all its brilliance, is very easy to maintain. They can be just periodically wipe with a damp cloth.

The panels on the walls in the living room

From the noted disadvantages can not high ecological material which can be a source of harmful vapors. For this reason, plastic panels for the walls do not trim the rooms in which people sleep or rest. However, the scope of the use of this fabric is wide.

Panels made of plastic in the kitchen

The scope of the use of plastic panels for walls

Due to the fact that the installation of the panels there is no difficulty, this material can be mounted on any kind of surface: brick, wood, plaster. Usually in homes and apartments panels sheathe the walls of toilets, bathrooms and kitchens. However, in a private home they often trim the wall on the veranda, in the pantry, in the outer room. Balconies can be found in a city apartment and loggiaDecorated this inexpensive and practical material. Plastics used in the manufacture of panels, can withstand temperatures up to - 20 degrees, which allows to use the material for finishing the exterior walls and facades of buildings.

The combination of plastic and wooden panels

It should be especially noted that the decoration of public premises, shops, offices, agencies and organizations are often made with plastic panels for the walls. Photos of such objects is easy to find for your reference. Due to the huge variety of design and low cost, the panel is used as individual entrepreneurs and owners of larger businesses.

Mirror and plastic panels on the wall

This finishing material is used not only for its intended purpose. You can often find ceilings, trimmed them. The slopes of plastic windowsVarious moldings and decorative designs, both inside and outside the premises by means of such trim panels.

Wall decoration panels

Useful advice!When decorating the walls of the bathroom plastic panels should be carefully promazyvat sealant corner joints. In the case of moisture beneath the surface, can be formed inside the mold, so as dampness is very difficult to erode.

There is nothing easier than to strengthen the plastic panels to the wall. How to do it - see below.

Plastic panels on the walls

How to fix the plastic panels to the wall

Before you begin the installation of the panels on the wall, it is necessary to make a correct calculation of material requirements. To do this, you need to calculate the area of ​​the surface to be coated the walls minus the square openings. Then we compute the area of ​​one panel by multiplying the length by the width with the grooves. Then divide the wall surface on one panel area. We get the number of pieces. By the results necessary to add 3 to 5%, so that was a small margin.

Fastening of panels to the wall

Before you mount the plastic panels to the wall, you need to upholster her crate from wood or metal guides profiles more civilized. When upright guide panels secured horizontally. Otherwise vertically. A distance between the guide is 30 - 50 cm. They fasten with self-tapping screws moldings. They are different. Type of molding depends on its purpose.

The diagonal arrangement of the panels on the wall

If it is necessary to bond the two panels with different locks together, it is necessary to use H-shaped profile, and is applied for finishing slopes F and U-shaped design. The panels are inserted one by one into the slots molding, filling an entire wall. Each panel is fastened to the sheathing screws. There are ceiling moldings, reminiscent of plinth. They can be used to completely cover the walls from floor to ceiling.

Wall decoration panels

When you install the first panel you must pay attention to its squareness and parallelism. The upper and lower ends of its horizontal moldings are inserted into and fastened in the lateral or angular starting. The second and subsequent panels are inserted into the slots of the previous ones. They no longer need to tie to anything, as they do not fall out. The last panel should be cut to 1 cm. and insert first in the final profile, and then gently push the penultimate item. Attach this panel is also not necessary. Similarly, all the walls are sheathed premises.

with imitation wood panel

Useful advice!Do not neglect the advice accurately align the first panel. Even a slight deviation from its vertical, lead through several parts to severe "dips" that ruin the appearance.

The vertical placement of the panels in the bedroom

Knowing how to fix plastic panels to the wall properly, you can in a short time to sheathe a sufficiently large surface area of ​​the walls, as the installation itself is not complicated. That is why this material is so popular among owners for the first time engaged in interior decoration alone.

How to install plastic panels on the wall (video)