Fiberboard: thickness and sheet sizes, the price of the material. What affects the price of the product?

hardboardOr fiberboard - one of the most popular modern building materials. Fiberboard used in the decoration of walls and floors, installation of interior partitions, for thermal insulation of the roof. It is an excellent material for the manufacture of furniture and doors. When buying sheet estimate density, size, time of manufacture, transportation and storage conditions. Main criteria for the correct choice of MDF: the thickness and size of the sheet, the price of the material. This will be discussed in this article.

fiberboard

The increase in the cost of resources and concern about the ecological state of the environment has led many manufacturers to invent new building materials and introduce technologies that allow significant savings raw materials without much damage to the quality of the final products. A clear indicator of the scope of these changes is the production of furniture, which replaced the natural solid wood came various synthetic materials.

First imported furniture, which was imported to our country in the second half of the twentieth century his aesthetic and durable construction showed that manufacturing can use the waste from reprocessing tree. Further development of fiberboard production technology has allowed the appearance closer to natural wood material, ennobling film special plates, similar to the texture of wood. Production of laminated fiberboard increased exponentially. Today, this material can be purchased at a very affordable price. The dimensions of the sheet of laminated chipboard are different and satisfy even the most unusual request of the consumer.

Fiberboard: thickness and sheet sizes, the price of material

The proper definition of the required dimensions of the building material dependent possibility to obtain the required working area, the minimum amount of waste and the final strength of the finished product.

When the finishing events preference is given to the whole slabs. To determine the number of pieces of calculated total area of ​​the work area with the cutting. In some cases, you can purchase individual blanks, which can be bought in woodworking shops. The total cost of such residues include the cost of services for their cut.

Before raskraivaniem sheets for finishing and insulation carried out detailed measurements of the walls, floor and ceiling. Then, based on standard plates of different sizes making up the embodiments of cutting circuits, and compares the number of residues in each case. Chosen the best option, at which the minimum amount of scrap.

Useful advice! Knowing the essential dimensions of fiberboard can be defined in advance with the method of transportation and a convenient place to store plates.

Standard sizes fiberboard sheet-

MDF is considered more advanced and improved analogue of the CPD. Orgalin value has increased strength and density of the material. Improve these parameters was possible thanks to a careful grinding of raw material and its subsequent pressing under high pressure.

The thickness of the fiberboard varies depending on the density of the material and is 3,5-25mm. Each type of fiberboard has a dimension line. Fiberboard, soft and medium-density is the thickest. The thickness of these plates is 8, 12, 16 and 25 mm. Semi-hard fiberboard having a thickness of 6, 8 and 12 mm. Most delicate are hard and superhard fiberboard with thickness of 3.2 mm, 4.5 mm and 6 mm.

Dimensions fiberboard sheets of different hardness are practically identical. They are determined on the basis of specific equipment, which uses the manufacturer. The length of the plates is 1220-3660 mm, width - 1200-2140 mm.

Standard sizes fiberboard sheet according to GOST 4598-86:

• soft fiberboard: length - 1220, 1600, 1800, 2500, 2700 and 3000; width - 1220 mm;
• semi-solid, solid, superhard fiberboard: length - 1220, 1700, 1800, 2050, 2500, 2745, 3050, 3350 and 3660; Width - 610, 1220, 1525, 1830 and 2410mm.

Useful advice!The board can be made to order with dimensional parameters, different from the standard. But the maximum size for soft slabs are 5.5 m, for solid fibreboard - 6.1 m.

Applications fiberboard depending on the thickness of the product

The thickness of the fiberboard sheet and its strength are in inverse relationship. Accordingly, prior to construction is necessary to determine the type of fiberboard according to his purpose.

For the heat insulating cladding of walls, ceilings and floors using porous soft fiberboard 8-12 mm thick, which resemble felts. These plates are also a good sound insulator.

The semisolid type plates that resemble a thick cardboard 12 mm thick can be used for furniture, as the rear wall cabinets and drawers. This material is used for the substrate under flooring future.

Solid plate thickness of 6 mm are excellent covering material for walls and ceilings. It is used for the installation of interior partitions and for the manufacture of door panels.

Superhard plate thickness of 6 mm is used for floors, doors and furniture. Unlike hard fiberboard they are impregnated with resins, as applied onto the surface of a special PVC-based film.

To determine the size of the fiberboard sheet, the width and the length of which is different, it is necessary to measure the dimensions of the working surface. Multiplying linear indicators obtained total area of ​​each individual section. Adding them, we obtain the total number of sheets available for purchase. Further, all layouts portions are arranged in a rectilinear plane and is made rectangular contour, which covers all the images. Thereafter MDF available standard sizes selected most acceptable which will provide a minimum residue material.

Price list for fiberboard products

Fiberboard cost depends on the overall dimensions, material type, maker, the presence of mediators. Soft fiberboard, regardless of size has the lowest cost. Products imported will cost much more expensive, that does not always lead to good quality. For example, solid fiberboard 2140h1220 mm in size and 3.2 mm thick cost 150 rubles. Russian manufacturers, and 210 rubles. have imported.

Untreated Fiber size 2745h1700 mm at a thickness of 3.2 mm would cost within 460 rubles., And the price of the laminated fiberboard sheet around 1026 rubles.

To consciously make a choice product of Russian production is necessary to compare the price policy of one type of product of the same thickness.

Price comparison hard fiberboard 2140h1220 size mm 3.2 mm thick:

Manufacturer	Price, rub. / Pcs	Price, € / m²
vendor	132	50,77
StroyVey	126	48,46
Marina	179	68,81

An important criterion is the actual location of the manufacturer. The closer it is, the less will be the transport component prices. Significant savings can be in a bulk purchase of a batch.

The thickness and size of fiberboard sheet: prices and photo products

The final price of the product depends on the type, thickness, sheet size, the front side sanitized or untreated.

Prices for the material from the catalog of "Stroitehmontazh":

Identification of the substance	Plate Size, mm	Thickness, mm	price, rub.
Fiberboard white	1220h2440	6	430
MDF wood	1035
Fiberboard laminated	1046

Typical thickness sizes and fiberboard sheet. Product price: what affects it?

All well-known manufacturers of hardboard manufacture products of a certain format with established standard sizes. Why, then pricing from different manufacturers is significantly different? After the manufacture of fiberboard method remains unchanged for many years, and an assortment of styles and colors are similar.

The final cost of influence, first of all, a big name known manufacturer. Then, based on its location. And this is directly related to the cost of transportation, which invests in the production of the material manufacturer.

The next criterion which affects the cost of the final product, the size and thickness of the product. Depending on the material of dimensions different quantity consumed raw chemical impurities.

Grades also affects the cost of the material. Fibreboard come in two varieties: the I grade has no visible damage to Class II minor dents and scratches on the front side of the product.

The next parameter is the kind of fiberboard. Here the major role plays the feed composition, the amount thereof, a method of processing and the presence of impurities.

A protective layer and a decorative coating adds extra margin to the cost of production. Here, the manufacturer is spent on costs associated with the application of the technology required texture to the plate, so the price laminated fibreboard sheet, the size and thickness of which clearly normalized to be much higher than that of a simple unground same fiberboard dimensions.

The table below shows the approximate cost of fiberboard. Prices laminated, painted and neoblagorozhenyh sheets are quoted in rubles per square meter. meter:

Thickness, mm	Neoblagorozhennoe coating	colored coating	laminated cover
firm	Upholstered	firm	Upholstered	firm	Upholstered
3,2	57-60	40	90-95	85	185-193	70
6	130-140	89	120	107-115	200-216	100-115
12	—	95	—	136	—	140
16	—	155	—	160	—	160-190

Useful advice! Some manufacturers sell sub-standard plates, which by their size or appearance of (damaged edges) do not meet the requirements of GOST. These defects do not have a material adverse effect on the quality of the panels, but will help to save on material costs.

Run-up in pricing per sheet fiberboard quite substantial, so if to perform a small amount of work the entire sheet will be too much, you can ask in the repair and construction of stores available scraps of chipboard of different lengths, which are sold discounted price.

Where you can buy high-quality building material?

Today the country has a huge number of outlets where you can buy building materials to any request. Each store is trying to expand its product range, according to user requirements and the emergence on the market of new products.

Repair and construction work - very responsible and laborious exercise. Approach to the selection of necessary materials you need with all the responsibility and care. To study in detail the pricing policy of building shops, you can choose for themselves the most appropriate option.

Useful advice!To acquire the necessary materials handy in large DIY stores, where there is a wide range of products and specially trained consultants will help you choose exactly what you need.

One such shop is a large hypermarkets "Epicenter", where a wide range of products, covering all spheres of human life. Products are divided into categories and clearly exhibited in the salesrooms. Additionally, you can order the missing goods at a given time.

The network "Epicenter" price list for fiberboard is optimal, and the availability of products from different vendors makes it possible to select the desired item in one place, saving time.

For the purchase of construction materials, you can use the services of online stores. Many of these structures are working directly with manufacturers, which determines the cost of production, which is an order of magnitude lower than that of competitors. The order can be issued from the comfort of home at any time. A fast delivery service will allow to receive the goods at the named place in the shortest possible time.

Modern range of fibreboard is very diverse. Everyone can choose for themselves a decent option, based on their scope and fiberboard own financial capabilities. If the correct approach to the selection of the construction material, after analyzing pricing for your region, you can get a good product at a very reasonable cost.

Related article:

But do not forget that the higher quality raw materials, additional components and more reliable pressing the level, the better will be the final product and, consequently, higher than its cost price.