Thermostat infrared heater: types, installation

Recent developments aimed at reducing electricity costs have become particularly popular in recent years. In addition, these devices also make it possible to increase the efficiency of heating devices, controlling their work. A common example of this - the thermostat to an infrared heater. Consider the features of his selection, installation and operation.

Types and characteristics of thermostats

Thermostat - a device which produces periodic temperature measurements in the room and, depending on the results, adjusts the operation of the heater. That is, if the air temperature has reached the mark exposed, the power is limited and the heater stops working. Once the air cools, the device again enters the active phase, thus continuously maintaining the necessary level of heat in the room.

Structure and operation of the devices regulating the temperature, may differ significantly from each other. There are two main types of thermostats:

1. Mechanical.
2. Electronic.

A first embodiment of thermostats is a small plastic box, the outer part of which is equipped with a switch. As a rule, it is round, that allows you to change its position smoothly. Dividing the value may be different, for example, in some models is 1 °, and in other transition occurs at once with 2 ° to 5 °, and t. D. In addition, the housing is a button on and a light to indicate whether the device is active now.

There are also more modern mechanical models of thermostats that have a display. However, the data shows there is not too much, and temperature control takes place with the help of only two buttons.

Useful advice!Use mechanical thermostat is convenient only if the house is a lot of time there is one of the tenants. This is important, since in the absence of people the device is better off. Remote control function is not provided.

Electronic thermostats have far greater opportunities to manage. The design and construction of these devices are constantly being upgraded - for the manufacture of current models even use LCD screens.

Depending on the model, configuration, and management can be carried out using the buttons, and sensory. In some devices to protect the screen and create a more attractive appearance, use special flaps.

Such devices can be used without any problems even in those homes where the owners are often absent or reside seasonally. The device is easy to programming and easily controlled remotely via mobile devices. The only difficulty in the acquisition of the thermostat - enough high cost.

How to connect to the infrared heater thermostat

Whichever of the above options you choose, for his accurate and correct operation requires proper installation. This is primarily due to the choice of a suitable location, making that you have to consider the following factors:

• the device may damage the high humidity;

• nearby should not be sources of heat or sunlight.

If you do not consider these factors, temperature measurements will be made inaccurate, leading to incorrect operation of the heater and its inability to maintain the required temperature in the house.

A separate issue - the connection of the device to the network and infrared heaters. In order to connect all these elements together, you must use the automatic switch. That it will be a source of supply for heater. Consider some of the most common connectivity options.

Wiring diagrams infrared heater through the thermostat

The most rapid and clear wiring diagram the thermostat to the infrared heater - thermostat is to use 1 to 1 heater. In this case, the connecting circuit is very simple: machine has two pairs of wires, one of which goes to the thermostat. One wire - is zero, the other - phase. And they need to be connected, respectively. By means of the second pair of wires connects to the heater itself.

The second is a bit more complicated, way to connect an infrared heater through the thermostat involves the use of a parallel connection. Thus one can connect directly thermoregulator two heating appliance. One pair of wires from the machine is connected to the thermostat, which, in turn, is distributing on two different heater.

The most difficult, but at the same time and the most practical option - is to use a thermostat for a few household heaters. For this purpose it is necessary to use a magnetic contactor and wiring diagram to develop individually. Of course, you can try to find a ready-made, but this method can not exactly guarantee the smooth operation of the system.

Useful advice! Pay special attention to the development of settlements and individual plan costs more because it affects your safety. Faults in the heating system can lead to a fire hazard.

There are even manufacturers who produce their original devices, magnetic actuators, as well as cable kit required to connect them. Because of this connection to produce a lot easier, and the quality of these products is considered to be higher. But in any case, if you have never had to deal with electricity, it is better to entrust the development of the circuit and connection system for professionals.

Infrared heater with thermostat: prices and features three popular models

wall and ceiling models of infrared heaters are quite popular, their main advantage - compact size. In addition, buyers attracted by the design and the ability to choose a model for your home decor. Below you can see the features and prices of several popular infrared heaters with thermostat.

Nikaten 200 - one of the most advanced infrared heating panels. Control Dynamics temperature change is regulated by a built-in thermostat. In addition, there is a security system that automatically shuts down the device in case of a dangerous situation or risk of fire.

Main characteristics of the heater 200 Nikaten:

• Ceramic panel;
• size - 30x60 cm;
• It cools for 90 minutes, continuing to generate heat;
• quiet operation;
• extremely simple installation.

Distinctive qualities of this panel can be called a huge selection of colors, as well as very affordable price - about 3500 rubles.

Heater Zilon IR-0.8 S It was designed as a wall and ceiling. This model can be mounted on any suitable surface. Included is provided a thermostat that regulates the line set and actual temperature parameters. To protect the device to turn off automatically in the event of overheating.

Main characteristics Zilon IR-0.8 S:

• Power - 0.8 kW;
• size - 119h13h4 cm;
• weight - 3.2 kg;
• It does not affect the content of carbon dioxide in the air;
• It consumes minimal power.

However, users point out some disadvantages of using this model. Thus, during the heating or cooling device produces a characteristic crackling like that is not for everyone. And it is located on the ceiling, can not always good enough to warm the floor. Yet, when you consider that the cost of the heater only 2,400 rubles., The device could be called one of the most worthy.

Noirot Royat February 1200 - Universal wall heater is equipped with just three modes, making it comfortable to use throughout the year and in any room. heat flow direction can also be adjusted by rotating the surface at different angles (30 °). To regulation carried out the most convenient, the developers have taken care of the possibility of mounting the control unit on either the right side or the left.

Main characteristics Noirot Royat February 1200:

• quartz heating element;
• Three power modes - 0.3 / 0.6 / 1.2 kW;
• size - 45h12h11 cm;
• has a thermostat and fuse from overheating;
• It runs silently.

Perhaps the only drawback of this device is quite a high cost - about 9700 rubles. The rest of the unit is considered to be reliable and are often used to heat areas such as a bathroom.

Floor infrared heaters with a thermoregulator

Another popular type of device - floor infrared heaters with temperature control. The price of such devices is not much different from the other options, however, due to their mobility, they are often more convenient. If you wish to buy an infrared outdoor heater with thermostat can easily choose a suitable specifically for your model of conditions among the vast number of proposals.

As an example, consider a popular line as infrared heaters Vallu, connect the thermostat which can not be yourself, but to pick up already staffed model very simple.

Connecting infrared heater Vallu occurs through the thermostat according to standard regimens. The monitoring device is integrated in the heater.

One of the most popular models of these heaters - BALLU BIH-L Bali series. Included with this device provides a modern steel telescopic tripod BIH-LS-210. It provides a firm fixation of the device and allows you to use it on a summer area, verandas, garden.

Main characteristics of the heater BALLU BIH-L:

• Power 2-3 kW;
• mounting height on a tripod to 4.5 m;
• for uniform heating is equipped with a special reflector with fins;
• Included are provided brackets for attachment to the surface;
• body made of steel;
• connect the thermostat to the infrared heater Vallu produced by the manufacturer;
• is a function of the control device heating.

This model is considered to be the most versatile, as it can be installed almost anywhere: at home, on the street or porch. Providing uniform heating, it creates a comfortable temperature for everyone who is within range, without expending excess energy on heating the air.

Useful advice!As stationary street heater can be considered the acquisition of infrared umbrella, specially designed to create a comfortable environment in the yard.

Choosing a thermostat for infrared heater

If we talk about the acquisition and connecting the thermostat to the infrared heater as a separate element, the main thing here is to make the right choice when buying. some of the most affordable models can be compared with a small table.

Brief description of the value and thermostats for heaters:

model name	Features and Specifications	Cost, rub.
Ballu RTR-E 6202	A simple mechanical control. Versatile for use with all devices and in all areas.	1100
Ballu TA2N-S	Mechanical adjustment of temperature conditions combined with turned on and off. There is a light diode indicating the current status of the device.	700
Eberle RTR - E6163	Universal device, suitable not only for heaters, but also to be connected to a floor heating system. It has a temperature control range from +5 to + 30 °.	1150
Eberle Instata 2	Button model, equipped with a small black-and-white display for display of temperature.	2850
Eberle Instat + 3r	The modern model of the electronic thermostat, which lends itself to programming.	3600

What kind of model you want to buy depends on your desires and capabilities. The diversity and functionality of devices represented in the sale, is able to satisfy the demands of even the most demanding customer. Today you can easily buy for home or garden devices, and, for example, infrared heaters with thermostat for the chicken coop or any other purpose.

Underestimate the importance of using thermostats the heaters difficult. We are talking not only about maintaining a comfortable temperature at any time of the year, but also significant cost savings and security. Especially considering the fact that the purchase is the easiest mechanical thermostat under the force of each.