Metal swing gates suspended on a triple series of loops
In addition, sketches, design drawings, diagrams swing gates with their hands, you can create an individual project, using forged elements, automatic opening gates and more. Thus, your design is not only reliable, but also unique in terms of design.
types of structures
All door types of data made up of one or two flaps which are attached with hinges to the frame. Depending on the type of wings, the following types of structures:
- frame with grid - this type of gate is well suited where you need to protect the area with plants, or simply to prevent permanent shading. In this case, the grid is quite cheap, easy to install and does not require constant care and can even boast a number of advantages;
Mounting dimensions swing gates and wickets Welded grid
- with insulation - usually installed in garages to protect the vehicle from severe frosts. As the insulation plate can be used polypropylene or conventional wooden boards. The metal shell may then be double or single.
Useful advice! When choosing a design, consider the type of fence to which it is attached. For example, if your fence is made of corrugated board, and the gate should make of it.
Modern design metal swing gate with a wicket
Also for the construction assembly uses a large amount of consumables: bricks, crushed stone, sand, cement, and conventional paint primer, nails or dowels. Directly when creating the gate with their hands is useful to you building level, a Bulgarian with different discs for cutting and metal grinding (grinding also can use a special grinding machine), spray gun, brush or roller welding apparatus.
Selecting a profile sheet material for the frame and the pillars
Before we engage in the manufacture of the fence and gates for private house made of corrugated board (photos of which can often be seen on the network), it is necessary to determine the type of profile sheet. There are the following options:
- "C" - profile wall sheet made of galvanized steel of small thickness. Characterized by lightness and strength, often used for self-production of the gate;
Types of profiled sheets are suitable for fitting the door
- "NS" - sheets with large wave height and a large thickness, characterized by high durability, but also greater weight;
- "N" - carrier profile sheet of large thickness and weight, is used to create sheds and garages.
For creating the gate C8 and C10: two types work best. The thickness of the first sheet of 0.4-0.6 mm and a wave height - 8 mm. Square meter of the sheet weighs 5.5 kg, that is, one standard size of 2x2.5 meters flap will weigh about 25 kg. C10 is made of steel to 0.8 mm, wave height - 10 mm. It is characterized by high weight, one flap can weigh up to 40 kg.
Swing gates and gate metal are made in the same style
Woodwork can be made of iron or rental of wooden beams. The first option is preferable, since it is necessary to protect the wood from rotting constantly and other adverse effects that metal transfer much easier. Also, the following types of frame:
- welded construction - the most durable and reliable option, which withstands a lot of weight. The only drawback - welded frame may be too heavy for the creation of an automatic gate;
- aluminum frame - is used only in conjunction with light cladding materials. Ideal for automatically opening gate due to its light weight;
- frame bolted - constructed simpler than welded, but can not boast the same reliability and durability.
skeleton diagram of a profiled tube for swing gates with a wicket
Useful advice! If you still want to use for the wood frame, then for this purpose it is best to approach a quality wooden beam with a cross section of 10x10.
The frame of iron assembled from profiled tubes with square or rectangular cross section. The optimal size - 40h20 mm.
Supporting pillars, which can be seen in the photo of forged gate and the gate can also be made of different materials:
- Tree - the cheapest, but not the most durable material for the supporting pillars. Advantage - the ease of handling;
The scheme supports a device for swing gates with a wicket
- metal - of which the easiest way to install the poles (they just dig in the ground), steadfastly maintained many of the natural and mechanical effects. A very good option supporting pillars for all types of structures - are metal poles with concrete or brick base.
installation procedure
Making the gate of the trapezoidal sheet with their hands - it is a complex, time-consuming task. Let us consider it in detail.
The initial stage of the construction of the gate - drawing up a detailed drawing of future construction, which can be made from scratch or from the Internet. In any case, necessary to carry out a certain number of calculations and measurements. Drawings, photos and video swing gates with their hands can be found in any specialized construction site, so you just have to choose the design that suits you option.
Mounting dimensions of the gate of corrugated board with a built-in flap gate
An important point - the right to determine the depth of the pits under the supporting pillars. If your doors are 2 m in height, the depth of the well should be no less than 1 m, and the diameter of the recess is worth doing at 10 cm larger than the diameter of the support tube. Classic door sizes of corrugated board with the elements of forging - 3-4. 2.5 m Thus it is necessary to take into account the dimensions of the gate, and if you are limited in the size of the plot, it can be embedded into one of the doors.
Next comes the installation of supports. The thickness of the support tube is selected depending on the weight of the entire structure. The tube is placed in the pit, then backfilled with gravel or broken brick, and is filled with mortar (cement with sand in the ratio 1: 3, and 25% water). If the design is too heavy or you just need additional reinforcement, the columns at the bottom can be lined with brick.
The process of installing the support pillars swing gates
Making the gate itself - a separate process, which should paint detail.
Installation of doors of corrugated board with the elements of forging: photos and instructions
In the manufacture of the target, it is first necessary to mount a frame that is installed in the opening. For this metal corners are arranged in a square or rectangle, and the joints are welded using the welding machine.
Useful advice! For greater strength it is recommended to make two frames - the external and internal side of the opening. Between them it is necessary to weld the metal plates. The stronger will mount, the better the frame will support the weight of the valves.
Mounting dimensions swing gates and gate with a metal frame and inserts of corrugated board
In the manufacture of the valves, metal profiles are decomposed on the flat surface in accordance with your drawing, and then the contact locations are welded. The obtained sheet should be strengthened by longitudinal or cross beams iron. In the same way the frame is made to the gate.
Thereafter, the coating is welded to the core portion. Recommended Sheet thickness - about 2 mm. Weight thicker sheet can not stand the support legs and the metal can be too thin and easily damaged.
Gates of profiled sheets forging elements
Particular attention should be paid loops, since it is the whole structure rests on them. Do not skimp on this element of the gate, otherwise you risk getting very unreliable design. The hinges are welded to the support posts and flaps using a welding machine.
After that, the gate and the gate mounted on hinges, locks and bolts are installed, the construction is covered with paint for corrosion protection.
Driving device forged swing gates with a wicket
Installation of automation on gates
The design of the motor driven - it is very comfortable and functional option that will save you time and effort. For this, even optionally have specialized equipment and can be used rotating mechanism, which is used in the satellite dish. Such an embodiment is not only effective and inexpensive, but also safer, since the engine from a satellite system can be combined with the step-down transformer.
Swing gates of metal installed automatics
Two drive from satellite systems with a maximum length rods are attached to the door wing from the inner side portion. They also bought a universal remote control. Also, it does not interfere with the system to connect to the current relay, which will return the flap to its original position if it falls under a rock or other obstacle. If this relay will not be the mechanism of automatic gate opening may be damaged as a result of contact with the road in front of the construction of even a small obstacle.
Related article:
Gate with his own hands. Drawings, photos and video. Advantages and disadvantages of swing and sliding gates, especially their mounting. Video installation process various types of gates.
Hammered gates: photo and manufacturing instructions
As already mentioned above, the wrought-iron gates are a great option that will show all the guests of your good taste, as well as the financial well-being. To their own hands to make this type of design, it is not necessary to be a professional blacksmith. In modern DIY stores sold a large number of various forged items, you just have to buy them and to include in his sketch.
Gate wicket forged metal
There are several choices of forged gate:
- Metal - this type is wholly made of decorative elements, iron rods, angles. Very stylish and beautiful looks, but the cost is very expensive.
- Combined - structures made of various materials, metal decorated forged elements. Are several times cheaper. The combination of materials depends on your imagination and needs, but the most popular option considered the gate of corrugated board with the elements of forging.
Wrought structure manufactured in much the same way as of corrugated board. First is a sketch, which was applied forged elements. By the way, the Internet can see a large number of design options for the finished product on the basis of which you can create your own unique style. Then, all parts are assembled on a flat surface and bonded by welding.
EXAMPLE hinged mounting forged gates and wickets
Useful advice!In the figure forged gate is very important to take into account the exact dimensions of the elements in order to in the end product is not a gap between them.
If the gate is forged, the photo will show that all the joints between the elements carefully cleaned and processed. This can be done manually with the help of emery cloth, or using a special grinder. Dye forged construction also is somewhat more complicated than that made of profiled sheet. The best thing to do to use a special spray gun or a set of brushes, if you have a lot of spare time.
Swing gates of metal elements and forging wicket
Also, you must select options for the location of forged components on the profile sheet. Then décor can be covered with the sheet surface not all, but only part of it. So you can save money, but to create a beautiful and expensive-looking fencing element.
Advantages and disadvantages of wrought iron gates
As with any other type, in forged design has its advantages and disadvantages. Advantages:
- durability - metal can last for decades with minimal care, and artistic forging never goes out of fashion;
Wrought iron designs differ special beauty and elegance
Caring for wrought iron designs
Special care this type of fencing is not required, especially if all the elements are painted a special anti-corrosion paint. Periodically elements must be cleaned of dirt and tint, and moving parts - lubricate. Clean forged structure better and most conveniently by means of a powerful water jet.
Drawings, photos and videos of forged gate with his hands shows that the abundance of open-work elements can lead to a number of difficulties in the process of painting, but a good gun to save the situation. Note that for coloring discolored parts mounted on top of the corrugated metal sheet, the last should enclose the paper.
Metal swing gates with plenty of openwork forged elements
Swing gates metal with wicket: photo and nuances of
Regardless of which option you choose swing gates, to consider a number of important points:
- of the frame to work the concrete around the support pillars should both be dry. If you make a direct tie-poles into the ground, the ground around them must be abundantly watered with water, thoroughly compacted, and then let it dry;
- work on laying the foundation for the gate (if required) and the supporting pillars is best done in the warm season, when the ground is not yet chilled, but not too wet;
Option metal swing gate with a wicket
Remember that quality and reliable gate - is key to the security of your site. Therefore it is not necessary to save on supplies, as well as casually refers to the process of assembly and installation design. Today at specialized sites on the Internet placed a huge amount of detailed and available materials, careful study which will avoid the most common errors.
Metal swing gates with a gate - one of the most popular types of doors. They are fairly easy to manufacture and use, inexpensive and will last you for years to come.
