SHARE
in social networks
Care suburban areas is not limited weeding flower beds and planting new plants. The aesthetic side of the issue is also necessary to pay attention if you want to give your garden a proper appearance. However, faced with the high garden ornaments in stores prices, many reject the idea, considering it too expensive. Consider how you can make original articles for the garden with his own hands: all the news and some traditional options.
Garden doll from flower pots
Content
-
1 From what we can make crafts for the garden with his own hands: all new items
- 1.1 Options crafts for garden, yard with his hands
-
2 Crafts for the garden with their hands out of scrap materials described
- 2.1 Crafts for the garden with his own hands: photos and instructions for creating painted stones
- 2.2 The original design of flower beds and flower beds with their own hands: all new items of handicrafts
-
3 Articles made of plastic bottles for the garden: photo and description of the best ideas
- 3.1 Palma of plastic bottles for processing suburban area
- 3.2 Gnomes of plastic bottles with their own hands: photo crafts for the garden with a step by step description
-
4 Original site design: crafts for garden buckets of mayonnaise
- 4.1 Ideas for the garden with his own hands: pots of buckets mayonnaise
- 5 Articles made of tires for the garden with his own hands
-
6 Articles made of foam for the garden with his own hands: photo examples and tips
- 6.1 craft ideas for the garden of the foam with your hands
From what we can make crafts for the garden with his own hands: all new items
Garden Decor with their hands - it's a great opportunity not only to issue an original territory, but also get rid of many unnecessary things in the house. Diy suit different unused items that could find new life as a garden decoration. Here are some options that you can use as a basis:
- used tires;
- old unwanted furniture and vehicles;
- tableware, plastic bottles, cans;
Bird feeders, hand made
- old household appliances;
- clothing and footwear;
- segments of pipes or fittings;
- stumps, branches or driftwood.
This is what we used to throw away like rubbish, while at the proper registration of any of these elements can become a worthy decoration of the garden.
Options crafts for garden, yard with his hands
Start design area worth exploring with photo crafts for the garden with his own hands. Looking through the options available, you can repeat exactly liked the decision, or on its basis to come up with their own, adapting it under the existing conditions, opportunities and preferences.
The simplest version of the traditional design of flower beds provides for the use of pots, vases or conventional wooden boxes. For the same purpose suit and old tires.
Beautiful vases of old shoes
Another variant of garden ornaments - use the garden sculptures, made out of natural materials, or any unnecessary items. Here are a few simple ideas whose implementation does not require too much effort:
- easiest to use branches and stumps, which are on the garden plots are always enough. You can use them to create sculptures of animals, castles and so on. This element will be a great decoration of flower beds, the territory around the gazebo or lawn;
- sculpture may be made of concrete or cement, using for this purpose a special form in which the composition is poured in liquid form;
Useful advice!Any cement or concrete structures require further strengthening. To avoid the destruction of the sculpture or the appearance of cracks in the foundation necessary to lay the rebar.
- abstract shapes can be made using wire or reinforcement elements. There are two options: leave the hollow structure inside or filled with earth, after wrapping it with burlap or mesh. In the second case, you can use the sculpture as a base for the landing of plants;
Stylish wooden crafts
- traditional scarecrow can be done using unnecessary clothing. Contrary to prejudice, such an element could well be a worthy ornament of the site, especially if you use it as the idea of registration of the image of a famous character.
In order to make the item for a long time retain their original appearance, it is very important to choose the right building materials for him. First of all it concerns the use of paints and varnishes. It would be the best acrylic paint, cold enamel or paint for glass work. A resistant lacquer coatings provide superior protection.
Look craft ideas for the garden from waste material. So, you can get rid of many, it is a pity to throw away, giving him a new life, and at the same time decorating local area. An excellent example can be a crafts for the garden with his own hands from computer disks.
Articles made of stones and flower pots
Crafts for the garden with their hands out of scrap materials described
Spring crafts in the garden are different in what materials you will need, as well as the complexity of the manufacturing technology. Consider a few not too difficult options that can be implemented with minimal time and effort.
Crafts for the garden with his own hands: photos and instructions for creating painted stones
Use stones for garden decoration - a classic technique that is used for a long time. However, it is not necessary to maintain their original appearance. Much more interesting will look elements, designed the original drawing. For example, it is possible to paint stones under cacti, creating thus interesting decor element.
Beautiful cactus from painted stones
Manufacturing technology of cactus with stones:
- using the dark green paint applied to the stones, the foundation created a cactus;
- then in using a lighter shade of green and a fine brush applied characteristic bands and dots;
- dried up stones covered by a layer of lacquer and established in pots or vases, prefilled stone chips.
Another option is to use larger stones for the design suburban area. Using ink on the surface thereof can be represented by different animals, houses, cars, etc. Easier only initially applied pattern by means of a pencil, and then decorate it with acrylic paints.
Useful advice!Such elements will be an excellent decoration of the territory, if you have a cottage there are ornamental pond.
Stones, painted a snail
The original design of flower beds and flower beds with their own hands: all new items of handicrafts
Talking about decorating flower beds, it is understood a number of the most diverse elements, which can transform the look of even the most ordinary beds. Sizes and colors are virtually unlimited, and you can choose the option that will be most advantageous to look is in your area:
- using conventional bricks or stumps can create beds that are called "rock gardens." Home - to ensure a good connection between the elements is that the construction has a robust and reliable;
- using a small motor can be made small fountainOn all sides decorated with flowers;
- Large popular crafts of tires for the garden. Bedded options with their help a lot as the most simple, and suspension and multi-tiered;
- fill the earth and planted flowers inside can be just about any unnecessary element, including torn boots, ceramic ware furniture go.
Homemade bed of plaster handprints
Useful advice!Be sure to consider using suspended elements for garden decoration. Ornaments, featured on several levels, look much more advantageous.
Articles made of plastic bottles for the garden: photo and description of the best ideas
A huge number of the most diverse plastic packaging thrown away as garbage, while the bottles can be an excellent raw material for the manufacture of many original ornaments for the garden. Let us consider some interesting ideas to use them with steps to manufacture.
Palma of plastic bottles for processing suburban area
In order to make the palm of plastic bottles, you need the following set of materials:
- bottles of brown and green plastic (preferably multiple different colors);
- sharp scissors;
- awl;
Palma and poultry from plastic bottles
- rods for a base length of not less than 25 cm (willow or metal can be used);
- metal sleeve;
- tube 2 cm in diameter;
- high-voltage cable (preferably 12-14 mm).
The first step is to cut the brown plastic bottle into two parts in order to get their bottom plus a small margin. At the bottom of the need to make a hole of such diameter that it took place chosen twig. Green bottle also cut, but in such a way as to separate the bottom and about 1 cm above it. Thereafter, the bottle is cut lengthwise into 3 equal parts (up to the point where the neck begins restriction). At the same time you want to save the neck.
In order to give leves similarity with these edges are cut so as to obtain a burr. The finished elements can be put on the cable. As a result, we obtain the twigs, which will continue to be attached to the trunk. One tree should have 7 branches.
Peacock from plastic bottles
You can then proceed to the assembly design: rods securely fixed in the ground, forming the base. The easiest way to achieve this, if the pre-weld them to the metal sheet, placing a different angle of inclination. After that, the tube attached to them and put on the sleeve. The length of each rod should correspond to the number of pieces of brown, which will be arranged in a row, and still reserve of 3 cm for leaves.
Related article:
Landscape design suburban area of 10 acres with his own hands: photo of model projects
Photo examples for registration. Plants and garden design in decorating. The best options for zoning.
Assembled structure, it is securely fixed in a place where it will be installed. Most often this element is arranged around a small artificial ponds or beds.
Useful advice!If we use the rods of different diameters, you can create an entire composition, simulating an oasis.
Gnomes of plastic bottles with their own hands: photo crafts for the garden with a step by step description
How well look figure garden gnome in the design of sites, we know from fashion magazines and contemporary films. But here is that this beauty can be made from scrap materials - not everyone knows. Consider how you can make a decoration, without spending a lot of effort and money.
Gnomes from plastic bottles
Since the dwarf is supposed to be large enough to be seen in the garden, as the foundation necessary to take a plastic bottle of 5 or 6 liters. In addition, you need paint for decoration, brush, awl, glue, which can glue the plastic details, and various little things that you want to decorate your creation: beard, eyes, and strap etc.
First of all you need to paint the bottle in the foreground color. This should be done from the inside, to avoid washing and damage to the layer. The easiest way to do this by pouring the paint into the container and rotate so that Color only the lower 2/3 of the container. It is important to wait for the complete drying of the ink.
At this time, you can start preparing for registration details. For the manufacture of plastic bottles are perfect for a smaller volume. Causing the paint brush of small containers can be made dwarf sleeves. If you paint the bottom of the bottle beige color, you can give them a resemblance to the wrists.
Of the bottles, you can create a lot of original jewelry
Connection of these elements is made by cutting holes of suitable diameter and additional fixation by means of wire and a special adhesive. In the same way fasten dwarf nose made of conventional caps.
Useful advice!The easiest way to draw eyes and mouth, using an ordinary brush and paint, but for the best effect, you can buy ready-made elements for the dolls.
To figure has been fairly stable and does not fly away at the first gust of wind, inside the barrels need to pour sand or earth.
Original site design: crafts for garden buckets of mayonnaise
Make a beautiful and original decorations for the streets and you can with this unusual element, as plastic buckets mayonnaise. The main condition - that the design was resistant to external factors and looks beautiful. Therefore, be sure to open the ready-made crafts waterproof varnish.
Diy, you can use any buckets and cans
Other niceties to be observed - to consider the future location of the crafts. For example, if it is located under a canopy or in the gazebo, it is permissible to use a variety of fabric or paper elements.
Installing or mounting pots of mayonnaise bucket is also important. By themselves, they are quite light, so that to ensure the sustainability of their need to fill or fix. If you fill the bucket earth and flowers, they, on the contrary, will be quite heavy, so if you plan to hang them - in advance, make sure the rope strength and reliability.
Useful advice!It is always possible to attach the adjustable bucket to the surface with screws or glue, ensuring, thus maximizing solid fixation.
Instead of buckets, you can use the old kettles
In advance, prepare all the necessary work materials: paints, brushes, water-resistant varnish, napkins, if you want to decoupage, and other small items that will serve to decorate, for example, beads, stones, beads or tiny figures of insects that can be bought in the store.
Ideas for the garden with his own hands: pots of buckets mayonnaise
Make buckets of mayonnaise pots - the easiest and most common variant, which is used for garden decoration. In this case, the best design obtained by using decoupage technique. So, you can not just create a brightly colored pots, but also make the whole work of art: unique and inimitable. Especially, this technology is a perfect solution for those who are not very good at drawing.
In order to make the original pot so you need to follow the following algorithm:
- bucket need to be degreased by wiping it, such as alcohol;
- then use a sponge and put on a surface of one or two layers of white paint;
Pots of buckets mayonnaise and burlap
- until the paint is dry, prepare the items napkins that you like design. Thematically, it can be anything: flowers, animals, patterns;
- wipes separate from the upper layer, the one on which a pattern;
Useful advice!For a more aesthetic appearance of the finished pot, used edge wipes are advised not to cut and carefully pick off. Thus, the joint has to be practically invisible.
- apply a layer of PVA glue bucket and accurately attach and flatten the top picture;
- after drying lacquer pick the finished product.
Articles made of tires for the garden with his own hands
Areas where old tires can be used, not even list. And the design suburban area is no exception. Very popular home-made playgrounds made with this material, as well as flower beds and flower gardens. Online you can find a variety of different craft workshops of the tires for the garden with his own hands. Consider a few simple design options.
Donkey in harness, made from old car tires
The most primitive version - a round bed of automobile tires. Call this a masterpiece of creation is difficult, however, with proper design, and it can serve as a garden ornament. A little harder, but much more effectively - a flower bed of a few tires, arranged one above the other.
To give interesting effects, it is possible to use different tire diameters are large and gradually decrease below resolution. It looks great and beds suspended from the tires. If you leave the drive in and properly fix it, then it will be possible to pour into the ground. The main thing - to take care of a secure mount, as the total weight of such a structure will not be too small.
Articles made of foam for the garden with his own hands: photo examples and tips
Another unusual material, which also found its application in the decoration of the exterior garden - foam. Due to a number of characteristics such as light weight, ease of handling, insensitive to rain and temperature changes - make this material very suitable for garden crafts. This decision will be an excellent alternative to plaster crafts for the garden with his own hands.
The first thing you should pay attention - the manufacturer's recommendations indicated on the container with the mixture purchased. By her own polyurethane foam the cylinder has a fluid consistency and hardens by contact with air. As a rule, for its complete drying requires 10-12 hours.
Figures of foam, covered with plaster and enamel
Useful advice!Do not forget about personal safety measures when working with assembly foam. Exactly how to protect themselves - you also show the information provided by the manufacturer on the container.
Here are some simple tips for working with the material:
- foam does not like cold, so it is better to work with an air temperature at zero;
- before operating the balloon must be carefully shake;
- during extrusion foam balloon cap hold down. Thus, the contents of the bottle will not come out, and you can use all of the foam that it has;
- Observe recommended (usually 10-15 minutes) the time interval between application of layers. Otherwise, uncured foam can fall off under the weight of these layers;
- to work with the foam was more convenient, you can use the special fastening tool.
craft ideas for the garden of the foam with your hands
Looking through the photos of the garden with his own hands, which are used for the decoration of figures from foam, you can see that the possibilities of this material are virtually unlimited, and it can be used to create a variety sculpture. However, in order to obtain a strong figure, it is necessary to provide a robust and reliable framework. For this purpose, you can use plastic bottles or tin and wood, wire or rebar.
Effective bird of foam and fabric
For example, to make the snail, just follow the simple algorithm:
- on the prepared surface (this can be done on a conventional desk laid by oilcloth) apply a first layer of foam which becomes a base;
- After drying, apply a second layer of foam and insert a plastic bottle, which will perform the role of the neck of the cochlea;
- plastic bottle cover and foam hands give it a desired shape;
- head and horns of a snail and formed his hands;
- to make the shell, put on the body of the snail foam, giving it an appropriate rounded shape. At this stage it is possible to insert in a small bucket shell or pot, intended for planting flowers;
- using the same foam to make a snail shell characteristic curls. Using the ink and the resulting foam zadekoriruyte crafts.
Frog of foam may be made as follows:
- as a base, use an old pot and jar. Fill them with foam and let dry. Pan will play the role of the body, and the bank will be the head of the frog. To construct was whole, it is recommended to bond parts using wire;
- to have a frog legs, use a sufficiently strong wire and covered with foam;
- Give the characteristic shape is not yet solidified foam hands;
- Use paint to give the desired color of the frog and make her eyes.
Manufacture of foam lizard
To impart stability to receive the figurines can be used to pour into containers sand. Then it will be more stable and will not succumb to the strong gusts of wind. All inaccuracies and unnecessary pieces of foam can be easily removed with a knife stationery, giving the most accurate form of sculpture. And in order to figure out the foam lasts longer you can further be applied to it a layer of putty, which will perform the protective function.
Useful advice!In the process design of garden sculpture You can use the LED backlight. So, in the evening the figure will glow, and create a unique festive atmosphere in the garden.
Independently decorate a garden, and for this purpose you can use a lot of ideas. It is not only the flowers and trees can help you to properly arrange the territory. Crafts, hand made, will be an excellent alternative to the purchased model, giving your site unique and in making its appearance unique flavor.