The junction between the laminate and tiles decorated with nut
You can do one kind of coating on the entire area of the studio, but the tiles in the bathroom will look quite out of place, and put in the kitchen laminate taste is not for everyone. Can we put laminate kitchen - it is a separate issue that will be discussed below.
When it becomes necessary to arrange the transition from one flooring to another first thing you should pay attention - whether on one level, they will be. If there is difference between the levels, you'll have to resort to a curved dock. Although it is often possible to meet her deliberate use and for decorative purposes.
Another reason to properly arrange the joints - to protect this place from dust and dirt. After all, if you do not give it enough attention, with the time between coating builds up the moisture and dirt, which will lead not only to unaesthetic appearance, but also to a reduction in the life of the tile or laminate.
If we talk about transitions within the same room, or the corridor and adjacent rooms, it is preferable to be set at a low nut. This will eliminate the risk of tripping over it while walking. But to distinguish between, for example, a bathroom and a corridor is better to use a high wooden threshold.
Fit tiles under the already established joint profile
Among the methods of interfacing two different types of floor covering are the following:
- assembling a decorative threshold;
- execution of the joint between the tile and laminate flooring;
- improvement of the podium.
Decorative porozhek: neat compound tile and laminate
Modern hardware store offers its customers a wide range of decorative profiles for laminate and tile. Making the joint in such a way is used in the case where both coatings are arranged in one plane, and although permitted deviation of 1 cm.
Material for thresholds is a plastic, wood or metal, most often - aluminum because of its light weight. Depending on your desires, you can find options that appearance will be similar to a stone, a precious metal or any wood species. The technical characteristics of aluminum sills between the tile and laminate flooring superior to all the others in that they have strength and durability. They wear out slower and can withstand high mechanical loads.
Examples neatly decorated transition from tile to laminate
Some of the decorative profiles have a number of additional features designed to improve the quality of their use. As an example, consider the slip thresholds. This effect is achieved by applying an additional coating layer or use of a ribbed framework.
In situations where the difference between the planes of the floor covering does not exceed 1 cm, decorative profiles can easily smooth out the defect. All that is needed - to put him at the required angle, ensuring maximum adhesion on both sides.
Useful advice! In order to disguise the difference is recommended to use a rounded thresholds in height coatings. They cope with this function better than others.
Types of decorative connecting profiles
Saddle for tile and laminate: how to put it in the butt
Assemble decorative threshold may well be on their own. It does not require special skills and sophisticated equipment. Consider the sequence of actions for the design of the transition between tile and laminate flooring, given that all the flooring already laid:
- at the interface necessary to drill two holes 6 mm in diameter;
- dowels mounted in the holes of appropriate diameter;
- Acquired nut should be cut to the desired size. Use a saw, metal or any other suitable tool, depending on the threshold of the material;
- cap screws, insert the ready-hole nut, along the central groove;
- correct screws so that its tip they rested on the dowels and gently hammer the threshold.
Useful advice! In order not to harm the floor covering, do not use an ordinary hammer. For this much better fit rubber.
Steps Fitting decorative nut
Do not forget that a laminate - is wood, which tends to expand with an increase in humidity. Therefore, be sure to leave a small gap (about 5 mm) to give the laminate to respond to external factors without compromising the appearance of the coating. Tile is generally irrelevant.
Flexible profile for a laminate and tile
If you have to draw a curved seam, it is best to buy a nut for laminate and tile on a flexible basis. They are made of rubber or soft plastic, which allows using it to make a seamless transition planes to 1.5 cm.
In order to establish a flexible threshold needed to take care of some points even during the laying of flooring. Thus, between them is necessary to measure the distance between them before the joining process and the laminate tiles. The seam should be sufficient to be able to insert the pillars on which is mounted a flexible threshold for laminate and tile.
A sectional view and sizes flexible decorative threshold
Then use a hair dryer building flexible nut is heated to soften its structure. Under the warm air, he is able to take on any desired shape. Mounts are inserted into the joint and heated nut is put on top and snaps. Just a few minutes after the nut completely cooled, it is ready for operation and reliably keeps the form that you have given him.
Docking laminate and tile-free threshold
If in the course of work you want to do a joint tile and laminate without nut, it is quite possible. To do this you will need skill and high precision design interface. And tile and laminate must be placed precisely in the same plane. The maximum allowable difference does not exceed 1-2 mm.
In the process of tile and laminate flooring in the future site of the joint must be neatly trimmed and cleaned of rough edges. After laying the remaining gap (not more than 5-10 mm) must be filled with special polymeric composition. Such a liquid plug for joint laminate and tile retains its properties for several years, after which it should be updated.
The docking tile and laminate without the use of the nut
In some cases, resorted to the arrangement of the podium, but it is a complicated and time-consuming process.
Useful advice! Instead of the nut can buy cork compensator. Between the tile and laminate it performs all the necessary functions without distracting their appearance out of the picture.
Tile and laminate flooring in the kitchen Photo combined sexes
Zone intended for cooking, can be separated from the dining not only via the partition, but also due to different floor covering. Daylight tile / laminate can be formed in different ways, but the beauty of the materials used do not fade.
As a good example we can consider some photos of the laminate. White Oak in the interior goes well with dark tiles. But the use of the laminate under a stone or ceramic tiles will help to create a solid image of the room. Buy Laminate Tile is a snap. It is only necessary to choose the right shade and texture. As examples, check out some photos of the kitchen floor, tile and laminate flooring which combine with each other perfectly.
Combined the kitchen floor: Cooking area is decorated with tiles, a dining area - laminate
Giving preference to the laminate under the tile in the kitchen, you will be much easier to buy sills between the tile and laminate flooring. Just pick the right color, and the similarity of the appearance of the coating will make it virtually invisible. Photo tiles under the laminate in the kitchen well demonstrates the potential of this method of registration.
Also unique combination of looks in the kitchen tiles and laminate, if the registration of contrasting colors have been chosen. Look at the photo tiles and laminate in the kitchen, made in the most unexpected and vivid colors.
That choose to design the kitchen floor? Which is better: a laminate or tile? This topic has been widely discussed on Internet forums and has hundreds of real-world feedback. Check out some of them, they will help to make your own opinion and make the right choice.
Practical solution floor finishes in the kitchen-living room
waterproof laminate flooring for the kitchen
In deciding what is best in the kitchen tiles or laminate, it is important to understand as precisely as possible, what challenges will face the latter during its operation. After all, like it or not, this material is not intended for use in such harsh conditions. Hence the question, how to choose laminate flooring for the kitchen? The choice is not that big, fit only water-resistant and moisture-resistant laminate. These two types of material is most suitable in the case of use in the kitchen.
Related article:
Waterproof laminate flooring 12mm 33 class, Germany: specifications, manufacturers and prices. The properties of the coating, the recommendations of experts. The differences between the moisture-proof and water-resistant laminate.
Laying water-resistant coating takes place in the usual way, but the aftercare process allows for some nice liberties:
- Can I wash laminate wet vacuum? Yes, water-resistant and waterproof coating quietly tolerate such a procedure.
- Can I wash laminate cleaner? It is possible, provided that the non-aggressive means, and suitable for cleaning wooden surfaces. Before you start cleaning be sure to check its impact on the surface on a small inconspicuous area.
- How to clean laminate flooring? Time of exposure to moisture coating should not exceed 15 minutes, during which time liquid will not have time to have any negative influence laminate.
Waterproof laminate flooring can be cleaned using detergents
As a solution to all the problems associated with the disadvantage of using laminate flooring in the kitchen, you can consider the option of laying the tile under the laminate. The interior photos of these solutions look wonderfully, but to take care of such a floor will be easier.
How to put laminate
On the question whether it is possible to lay laminate flooring in the kitchen, we have understood. Let's see how it is done laying on the floor so that the seam is not only, but also all of the coating as a whole looked advantageous. Main steps laying laminate:
- dismantling the old coating;
- training base;
- laying laminate by means of adhesive or locking compound.
Clay as a method of stacking is used infrequently. This is due to its ability to crack over time and lose their properties. In addition, this work requires a lot of effort and is not subject to further dismantle without damaging the material.
Connecting via locks allows to disassemble and assemble laminate again. For such fastening recommended rubber hammer to hammer the coating elements.
Laying laminate is performed using a special rubber mallet
Waterproof laminate flooring for bathrooms
Another room, where today you can find laminate flooring - bathroom. Until recently, the option to submit a registration of sex in the bathroom was almost impossible, because under the influence of high humidity, conventional laminate swells almost immediately. Fans of wooden surfaces as an alternative solution could be used under the laminate floor tiles. This is a great way to make a beautiful interior, and thus save yourself the hassle associated with the reaction of wood to moisture.
With the advent of waterproof laminate 33 classes all changed. No longer need to think about whether it is possible to wash the laminate and the coating will react to water ingress. Features a waterproof laminate bathroom fully satisfied all the requirements put forward by the modern and high-quality flooring.
Some designers went further and proposed to use in the interiors of bathrooms laminate in the form of tiles. Of course, quite difficult to appreciate the necessity of such a decision, but we have to admit that this floor looks very impressive.
For laying in the bathroom waterproof laminate used
Making the floor in the hallway and laminate tiles: Photo of successful combinations
Practical solution is considered to be a combination of laminate and tiles in the hallway. Photos of this combination are quite common and alleged masters, it justifies itself. In addition to the two types of coverage must be purchased from the joint profile for tile and laminate.
Photography with laminate tiles in the corridor demonstrate that part of the floor adjacent to the entrance door, it is possible to lay tiles or tiles under the laminate. Photos show the aesthetics of such a decision, and many users claim that because cleaning becomes much easier. And the risk of spoiling the laminate so that water and snow shoes are constantly on it deleted.
As an alternative to the original design, consider a tile hallway under the laminate Kerama Marazzi. A wide selection of high quality products and favors the acquisition of a tile of this particular brand. Joint profile for laminate and tile that will fit any brand, so that any difficulties with registration interface you will not have.
The entrance area in the entrance hall is decorated with ceramic tiles
Among other things, sometimes the question arises whether it is possible to lay laminate tiles, without removing the existing cover? This pattern is possible because the laminate creates its own rigid base and does not have an excessive load on the tiles, which remains at the bottom. However, some choose laminate for the kitchen and the hallway, if you plan to lay it on top of old coating, it is better to consult with a specialist.
As can be seen, combined with each other such two different coatings, as laminate and tile - is a snap. Execution of joint or mounting nut between them and did take a little time and effort. And yet, if you still have any doubts about the advisability of such a combination, see how compelling can look laminate flooring and tiles in the kitchen. Photo of some interior solutions can serve as inspiration for you or as a basis for creating your own design.
