How to hide heating pipes in an apartment (photo)

Nowadays, an apartment is more than ever penetrated by communications. Particularly many difficulties arise with how to hide the heating pipes. However, there are enough ways to brick them up, you just need to choose which one is better. Designers do not care too much about masking heating pipes, which sometimes look inappropriate, so homeowners have to think about this.

Methods for masking heating pipes

First of all, we study the scheme for laying heating pipes. Proceeding from it, it is necessary to think over possible options. In a private house, everything is done during construction, when communications can be laid in the walls of rooms and utility rooms. But what to do with unsightly heating mains to apartment owners?

You can hide heating pipes in finished housing in the following ways:

• decorate with screens;
• to make boxes or false walls from drywall and other similar materials;
• pour into the screed;
• cleaned by false ceilings;
• hide heating elements behind furniture and plants.

How to close heating radiators with decorative screens?

When a decision is made on how best to hide the heating pipes in a modern apartment, the use of screens is the fastest and most effective. The heating batteries of the old model function no worse than new ones, and sometimes it makes no sense to change them. Their screening does not require the help of professionals. It is best to cover risers and radiators with screens when they are at a distance from the wall. It should be borne in mind that up to 15% of the heat will be lost.

Decorative linings and a plastic box on heating pipes are often transformed into a cabinet or cabinet. Materials are purchased in stores or decor is made from improvised means.

The owners of apartments are interested in the question of whether it is possible to leave the gates available if there is a screen so that repair radiators, regulate temperature and bleed air when it enters the heating system? To do this, make the screen removable or leave open ends on the batteries. Also, the screen surface is made with holes or slots in order to improve heat transfer and reduce energy loss.

If the radiators come out, they are covered with a box. For radiators in a niche, panels are used. Materials can be metal, plastic, wood, glass, etc. Products must match the interior of the premises in color, pattern or pattern.

It is advisable to choose glass screens for radiatorsthat do not transmit radiation and do not reduce convective heat transfer, if the gaps are chosen correctly. They are easy to remove and clean. Tempered glass does not break, but many now prefer a transparent acrylic screen due to its light weight, a variety of shapes and colors.

How to hide heating pipes in the floor or in the wall

Hidden laying of pipes for water supply and heating in a multi-storey building requires obtaining permission for this. It is necessary to order a rework project and coordinate it with the Housing Office, which is difficult to do. In addition, when a leak occurs, the neighbors can be flooded, since the malfunction is difficult to quickly eliminate. It is best to hide the heating pipes in the supporting wall or floor of your own home.

A plus is an increase in heat transfer through building materials, as well as improving the appearance of rooms without communications. Modern polypropylene or metal-plastic pipes have a very significant service life.

Rules for designing heating systems with pipes built into the walls:

• The use of reinforced pipes for heating with compensation loops from temperature expansion.
• Collapsible fittings may leak over time. Only welded structures can be walled into the walls, for example, elements of a heating system made of polypropylene pipes. In an extreme case, for detachable pipe connections, viewing windows are left in the walls through which you can inspect and tighten the threaded connections.
• It is desirable to insulate the pipeline in the wall. This is especially true for metal products, on the surface of which condensation forms upon contact with concrete. It is important to lay thermal insulation of the external walls, which can take energy into the external environment.
• The feed and return in the strobe are laid along separate channels or maintain a distance of at least 10 cm between them.

The procedure for laying pipes

First of all, it is necessary to develop a gasket diagram indicating the exact location of the pipes. This requirement must be met in order not to damage hidden communications during further work.

The installation of heating elements is carried out sequentially.

1. In the walls of traditional materials, the gates break through with a size that takes into account the diameter of the pipes, the thickness of the insulation and plaster. The channel is made only vertically so as not to weaken the supporting structures. Slabs can not be gated. First, pipes are laid on them, and then they are poured with a concrete screed. If it was made earlier, it can be ditched, since the layer is not a carrier. Under the wooden floor, heating pipes can be laid over the ceiling along the board, which can be removed if necessary.
2. The pipes are fastened in the channel of the wall or floor using clamps and dowels.
3. The gates are closed with cement mortar only after testing the system under excessive pressure and temperature for several days.
4. After the wall should be puttied under the finish, so that it becomes smooth and uniform.

Installation of heating pipes under the panel

The method of cladding gypsum board, plastic, plywood, MDF panels or OSB boards is the most common. For this, a frame is erected around the riser or horizontal pipe on which the sheets are attached. Here, no coordination with the Housing Office is required and the transfer of communications is not necessary. Strobing the walls is not necessary. After installation, it will be difficult to get to the pipes, so inspection hatches are made or some plates are installed on latches or magnets with the possibility of removal. Finished panels that do not require a finish are easy to disassemble. Options can be the following: a box or a false wall. In both cases, a frame is made.

The main task of a false wall is to delimit the space in the room. It is made bilateral and internally laid communications and utilities. Installation of a false wall is not difficult, and there is a lot of space between the sheets. The frame may be made of wood, but a metal profile is preferable, although more expensive. Depending on the material, wood or metal screws are used.

The bathroom is done PVC panel boxresistant to moisture. If the heating pipes are sewn up with drywall, it is selected waterproof, and tiles are glued to it. The wooden crate is not suitable here: it is necessary to use galvanized profiles that are resistant to moisture and corrosion.

It is convenient to hide the elements of the heating system with a plastic skirting-box, just as it is done with a cable channel for electrical wiring, passing over the floor along the wall.

Decoration of heating pipes

It is advisable to fill in the box or pour into the monolith only new pipes, since shabby ones can leak at any time. For old communications, it’s convenient to use one of the decoration methods that will allow you to keep the state of communications under control.

1. You can paint the heating main in tone of wall decoration. For this, the pipes must first be cleaned.
2. The hemp weave looks beautiful. Here you can add artificial branches with leaves to the cover or build a decorative corner.
3. In places that are not convenient for closure, pipes can be decorated in such a way that no one guesses about their existence. It is only necessary to apply imagination.

Pipe laying in ceiling structures

Hide the heating pipe or cable behind false ceiling easier than in the wall. It is especially convenient to do this in multi-level structures with the ability to dismantle drywall sheets at the lower level during pipe repair. In this case, the main part of the ceiling will remain untouched. You can make a separate box on an ordinary ceiling, and then decorate it or place spotlights in it. Highways are also located in ceiling niches where they are not visible, and access is provided free.

Pipelines are laid under the ceiling only in extreme cases, when there are no other possibilities.

Conclusion

It is possible to mask highways in an apartment or a house due to the presence of new durable materials. When deciding how to hide heating pipes in an apartment from the eyes, it is important to choose the most suitable way, which can help hide other interior details that are undesirable for viewing. Work in most cases, you can do it yourself. A beautiful interior depends on the imagination of the owners and the desire to spend enough time and energy on its creation.