What is the total adhesive for MDF bull terrier
Table of contents
1 mandatory quality
- 1.1 excess demand
- 2.1 Group №1: universal compounds
- 2.2 Group №2: «liquid nails"
- 2.3 Group №3: polyurethane foam
- 3 A little bit about the process
- 4 conclusion
Adhesive for MDF panels must have a grasp of fighting dogs, to ensure the reliability of the installed trim. But that's not all put forward demands on the qualitative composition. Next, I voiced them, as well as analyze the current offers of the product advanced by the producers.
Picture windows in a specialty store with different brands of adhesive solutions used to fix the panels of medium density fibreboard
Increasingly found the performance of the installation panels from medium density fiberboard in the crate, but this is not a mandatory rule. It is possible to mount them on the glue in some cases even more convenient and easier.
But in this case adhesive mortar must have a set of specific qualities that will serve as a new facing for a long time and qualitatively:
- Possess highly specialized. The annotations to the composition should be indicated that it is versatile and is designed to fix wood products;
Adhesive for wall panels MDF labeled "universal"
- To ensure a strong and reliable "grip" on contact, with both types of mineral bases, including stone, brick and stucco, and with organicWhich are particleboard, OSB and DSP;
MDF panel Fixing imitating brickwork, on a concrete wall
- Have an excellent indicator of adhesion and high speed solidification. Usually the presence of such qualities is emphasized by the addition to the title of words such as "strong", "super-strong", "superstrong", "multi" and so on;
Sample "super-strong" bonding solution for panels of medium density fibreboard
- Be resistant to temperature changes and moisture, alkalis, acids and salts. In this case we are not talking about the frost, as it is not used for the purpose of MDF panels cladding the exterior facades.
Due to the lack of experience in some of the novice masters try to choose transparent adhesives. Such a choice they justify what they say, if pressed out of the material at the junction, then the transparency will not disrupt the entire aesthetic finish.
But there are two reasons why I do not recommend a hurry with this step:
- All panels of medium density fiberboard provided with fastening system "tongue and groove". That is, at the time of their joining the ridge end of one section enters the end of the adjacent ridge that completely eliminates the squeezing of glue to the back side of the decorative;
MDF panels docking system eliminates the possibility of extrusion of the adhesive
- Transparent adhesives are generally intended for gluing glass plumbing, stone, ceramic, porcelain or acrylic, but when working with wood to use them undesirable.
Transparent adhesives are designed for plumbers
With the demands of all clear now I move on to the specifics, and consider the products offered by manufacturers, which can be divided into three groups:
Group №1: universal compounds
Excellent bonded to each other heavy products from materials such as stone, metal, glass, wood, rubber or polystyrene.
That is, to cope with almost any fixing. Here are the most prominent representatives of this group:
- "Titan Wild" is used for bonding of virtually all building materials. Its approximate price is 164 rubles per bottle 1 liter. Technical details:
|Structure||copolymers of vinyl acetate|
|the appearance of||viscous substance|
|The recommended temperature of the substrate||+5 to +30 degrees Celsius|
|Density||1.07 g / cm3|
|viscosity index||1300-1700 Cps.|
|Temperature operating limits||From -30 to +60 degrees Celsius|
Examples of different containers glue "Titan Wilde"
- «Titebond Multi-Purpose» also has a very wide range of applications. Its price starts from 130 rubles per trohsotgrammovy tube. Technical details:
|The basis||Synthetic rubber|
|the appearance of||medium viscosity substance|
|The recommended temperature of the substrate||-18 to +37 degrees Celsius|
|operating temperature||-29 to +49 degrees Celsius|
|Density||1,2 kg / l|
|viscosity index||× 150 Pa with|
|volatile elements||5.7 g / l|
|The residue was dry type||75%|
|setting time||20 minutes.|
Tube of glue «Titebond Multi-Purpose»
- "Moment 1". In this case, the capacitance of the bank 750 ml will have to pay 190 rubles. Specifications such as the composition has the following:
|Structure||Rubber, resin, naphthenic hydrocarbons and acetone|
|the appearance of||thick liquid|
|The recommended temperature of the substrate||From +18 to +25 degrees Celsius|
|operating temperature||-40 to +110 degrees Celsius|
Bank glue "Momen-1"
But before you decide on the question of how to glue adhesive MDF panels, should also think about their own skills in this area. Thus, for example, the above described group and at least has a high efficiency in the application is not the easiest. So, I turn to the analysis of these adhesives.
Tip: in the process of gluing finish of medium density fibreboard with his hands necessarily take care of the presence of drafts in the room and a respirator to your face.
Otherwise, you run the risk of serious poisoning toxins.
Respiratory help you pass the toxins poisoning
Group №2: «liquid nails"
This option is very popular among both professional builders and craftsmen among home, thanks to its ease of operation.
Tip: I recommend just when buying the "liquid nails" to purchase immediately and a special iron structure, called a "gun."
By this arrangement, the adhesive application will be carried out very simply and quickly.
"Gun" for "liquid nail"
Here are the main proposals in this direction:
- «Makroflex MF220 Heavy duty". Chetyrohsotgrammovy tube costs around 158 rubles. Technical details:
|The basis||The aqueous dispersion of the polyacrylate|
|the appearance of||The pasty substance with a smooth surface|
|The recommended temperature of the substrate||10 degrees Celsius and above|
|operating temperature||-20 to +80 degrees Celsius|
|setting time||15 minutes.|
|setting rate||100 kg / m2|
|Final strength of solidified substance||6 N / mm|
|Density||1.3 g / cm2|
«Makroflex MF220 Ductile" sample adhesive
- «Liquid Nails LN-910." The price of such a composition in specialized stores typically around 220 rubles. Technical details:
|The basis||Synthetic rubber not containing acetone and toluop|
|The residue was dry type||67%|
|Density||1.12 kg / l|
|setting rate||35 kg / m2|
|Final strength of solidified substance||40 kg / m2|
Sample adhesive «Liquid Nails LN-910"
- "Moment of Crystal". Then 125 ml volume tube is placed 110 rubles. Characteristic:
|the appearance of||Emulsion|
|operating temperature||-50 to +80 degrees Celsius|
|complete solidification agent Time||30 hours|
|Final strength of solidified substance||50 MPa|
A tube of adhesive solution "Moment of Crystal"
So we can safely say that the "liquid nails" - is a great answer to the question: what glue MDF to MDF, brick, concrete or other building materials to people who deal with construction works only in periods of home repair.
Group №3: polyurethane foam
Construction foam, as a rule, is used most often for the purpose of sealing joints or fill voids, but professionals can adapt to it and installation sections of medium density fiberboard to the walls and even the ceiling. As an example, consider the brand "Orr":
|application temperature||-10 to +30 degrees Celsius|
|Volume of foam outlet||0.018 m3|
|Secondary volume increase||Up to 70%|
|cost of||80 rubles|
Adhesive foam panels MDF brand "Orr"
A little bit about the process
Schematic guide glue application for fixing MDF
Since I started the question about the glue, it is necessary to devote a few words, and its operation:
- Degreasing surface. The first thing I did was wipe the back side of the section with acetone to eliminate any dirt or dust that could prevent perfect adhesion.
Also check for the presence of drops and the wall itself:
- Small unevennesses can be compensated with additional glue;
- If there is a significant "ripple", it is better to first apply a leveling plaster, because to continue to use to this end, the adhesive solution is too costly in financial plan.
- Adhesive application. Then zigzag line nanoshu adhesive;
Application of adhesive mixture
- Mounting plate. After waiting a certain technical break indicated on the package, a tube bank or adhesive used, enclose the plate to the installation site and align tapping rubber hammer. Result check spirit level: if the section was fixed evenly, then move on to the next section;
Rubber mallet to align the plate
- Removal of excess. Extruded adhesive fragments outwardly delete a damp cloth. If you for some reason just did not get it done, then we can then just cut them with a sharp knife.
Also, during the execution of interior decorating is sometimes the question arises: is it possible to hang wallpaper on MDF panels? Such an option is allowed, but it is very important to perform a thorough pre-primer fiberboard that during lining it does not absorb the adhesive.
Sheathing - is not the only method of installation of MDF panels, may well come up and glue. The main thing is to choose a solution that grip will not be worse than the bull terrier, or even better. To date, such a "good" enough on the shelves of specialty stores, well, I tried to have with him a little bit to introduce.
Choosing an effective adhesive - 50% mounting
Videos in this article contains some material that can provide you to introduce more information regarding the consideration of the topic.
If you have questions, ask them in the comments.