Plumbing repair their own hands with commentary: small and large, the installation and removal

Plumbing repair their own hands. Water supply, sewerage, heating. Installing sinks, faucets, bathtubs and toilets


Table of contents

  • 1 A little about plumbing
    • 1.1 Redistribution of work
    • 1.2 The choice of tubes
  • 2 sewerage
  • 3 Heating
  • 4 A few words about the installation of sinks, faucets, bathtubs and toilets
  • 5 conclusion

Plumbing - it is an integral part of any home, his pledge of comfort and coziness. In order to ensure proper human living conditions, sanitary ware should be at least high-quality and properly installed. But this does not mean that we can not do without a special squad of professional plumbers. In this article we will talk about how the plumbing repair their own hands.

To date, of the plumbing essentials gradually transformed into one of the elements of the interior, and sometimes in a luxury item.

Plumbing repair their own hands

The plumbing is increasingly appreciated ease of use and practicality, elegance of form, simplicity of operation and maintenance, ergonomics.

And this is only part of the criteria by which we select the sinks, toilets, bathtubs, faucets, heating system, water supply and sanitation.

Most potential buyers are guided in the selection process of plumbing on three main parameters:

  • comfort;
  • quality;
  • design.

However, as practice shows, the more problems arise not only with the choice of plumbing, but with its subsequent installation.

The most pressing issues in this area have been working with:

  • water supply;
  • sewerage;
  • heating;
  • installation of sinks;
  • mixers (see. Repair faucet for the bathroom);
  • installing the baths;
  • installing toilets.

These works involve both installation and minor repairs of plumbing.

Let us consider some of the following types of work a little more.

A little about plumbing

Redistribution of work

Plumbing - it is the main location of the binding of all sanitary equipment home. The MDU tube with hot and cold water locate risers.

Many face daily problems of installation of pipes for hot and cold water. Another common task - to install an additional outlet for the water pipes, which is required for a dishwasher or washing machine.

repair plumbing with comments

Domestic water supply

If you decide to pursue the matter on their own, learn the specifics of these works in detail.

The choice of tubes

The first thing we should start - is the choice of the material of pipes, which are the main components of our water supply.

It is taken into account at the same time not only the price but also the reliability of the material. Your choice which may be steel, polypropylene, metal and plastic or copper.

Carrying water supply depends on the characteristics of a house or apartment, so clear instructions in this regard as such, no.


First of all, you should know that "secondary products" discharged into the toilet several ways:

  • vertically downwards;
  • back in the horizontal direction;
  • at a small angle to the floor.
repair and installation of plumbing
In standard flats pipes come out of the wall either horizontally or at a slight angle to the floor. The horizontal outlet pipe connected to the toilet bowl by means of special connecting pipe.

It has an appropriate form or is a corrugated tube, resembling an accordion and has an ability to flex at different angles.

The construction market offers us a wide range of pipes of such polymers:

  • polybutylene;
  • polyethylene;
  • PVC;
  • polypropylene.

The most popular today are PVC pipes (PVC). They are resistant to virtually any aggressive substances which may be contained not only in the ground adjacent the pipe, but also domestic waste waters.

In addition, they are quite easy in comparison with their counterparts in other materials, therefore, the process of mounting is greatly simplified.


Heating - is not the element of construction, which should be saved. Today, there are a variety of heating systems: radiant, electric and gas.

Heaters, towel rails and radiators are also encouraging customers a variety of models.

Minor repairs of plumbing

The circuit of the heating system with the upper wiring
1 - boiler; 2 - the main strut; 3 - routing;
4 - hot risers; 5 - check the risers;
6 - tank line; 7 - expansion; 8 - Pump; 9 - return line.

Hold own heating is much more difficult than it might seem at first glance. That's why we recommend to entrust this matter to the employee housing department or representative of a licensed company.

Yes, installing a radiator with your hands, you will save some money, but it is fraught with high risk of incurring significant financial costs in the future. Brother Lee for it yourself - decide for yourself, but remember that the full impact of initiative will fall on your shoulders.

A few words about the installation of sinks, faucets, bathtubs and toilets

Let's start with the shells. Safe implementation of quality sinks in the kitchen and the bathroom is directly proportional to your savings and nerves.

We can not say that the repair and the installation of sanitary equipment of this type is characterized some particularly complex, it requires only a free time, a good guide and tool kit.

Modern shells are very diverse in structure and design, complete can be a sink with a pedestal or podstolya.

In addition, the shells are classified according to the place of location of the mixer on:

  • deaf model;
  • model with a hole.

Some shells contain a complete fastener elements. The installation shell is held on an individual basis, since in each case there are a number of its features.

mixers options. Italian mixers Bandini

mixers options. Italian mixers Bandini

This also applies to faucets, bathtubs and toilets. Take even the same repair faucets for the kitchen.

The most popular can be called a mechanical lever odnozahvatny and twin valve, but each building Shop offers a wide range of models, which differ not only in design and construction, but also the principle of installation.

As for the bathrooms, you can choose among:

  • cast iron;
  • plastic;
  • steel;
  • acrylic.

Specificity bath installation is not too much trouble, but if it is a heavy cast-iron bath, then you obviously need help an extra pair of strong male hands.

The main thing in choosing a toilet - its overall design and construction of which corresponds to the Russian system of water supply and sanitation. Guided by a design, you can choose an attractive, but inappropriate to the realities of Russian model.

Pay attention to the way of fixing the toilet. The most practical and reliable way of fastening - Installation of four bolts. Particular difficulties may arise with the installation of suspended models, so in such cases it is better to contact the professionals.


Plumbing repair their own hands - a painstaking job that requires a minimum of knowledge and tools. Come to this matter very seriously. If you want to last a long time sanitary and safe - do not try to save money. Choose a plumber, paying attention to the design and practicality. If you are unsure that you can cope with the installation of an element, it is better initially to entrust this work to professionals.

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.