Repair Spa: common breakdowns and technical problems
Table of contents
1 How it works?
- 1.1 Classification
- 1.2 Principle of operation
- 2 widespread damage
- 3 technical issues
- 4 Summing up
Hot Tub - very useful invention. It allows you to relax after a hard day's work or just to enjoy bubble massages. However, what if you needed a repair hot tub? This will be discussed in this article.
After the usual cast iron and acrylic bathtubs, technical innovations us wonder. But abroad have long used a variety of hot tubs, allowing release tension being sprayed with warm waters.
The first company that entered the territory of the former Soviet Union, became the Italian "Jacuzzi". Therefore, our people persist in calling and all the other hot tub.
How it works?
The first baths of this type were made in the image and likeness of geothermal geysers. The design baths are three types of massage - water jets (actually, hydro) air massage (air) and mixed variant - turbopul. The main task of the hot tub is a stress relief and muscle relaxation.
Principle of operation
The massage effect is achieved by supplying water through nozzles - the holes, generally along the spine, waist or legs.
Hot tubs are absolutely safe. All electrical appliances in the bathroom decorated supplied with residual current circuit breaker. If you suspect a short circuit, such a device will turn off the bath, so the man lying in it, there is nothing to fear.
As with any technique, a hot tub can be rendered useless because of a failure of any component or mechanism. Also do not forget about the simple mechanical damage - chips and cracks in the acrylic coating.
Therefore, to repair baths Jacuzzi demand always exists and will exist!
- In the first place, a bath can not work because of the blockage. This issue is unfamiliar to those who have purchased a bath with disinfection system. For prevention in the hole filled with means for cleaning baths. Passing through all the pipes, it washes away the dirt and carries it into the sewer.
Clean the usual hot tub, you can use a cleaning tablet is lowered into the water during operation. Given the purity of our water, to carry out such a procedure is necessary at least once in 2-3 months.
- Another reason for failure can be the use of detergents in conjunction with hydromassage system. The fact is that when the whirlpool soap water flows are not directly on the sink and circulates inside the mechanism that can cause it to break.
Important! Wash in a bath can only be turned off. Relax under the warm jets need for clean water, the maximum - with a dash of sea salt or special additives. With this operation, the device will last for a long time.
A hot tub
- Previously repair iron bathtubs began with the restoration of the enamel coating. The new baths is used instead of acrylic enamels which is more resistant to mechanical influences, less amenable to contamination and darkens with time.
But it in the case of strong shocks may occur chips and scratches. To restore the cover with their hands using the filling method of repair. The liquid acrylic is poured on the problem areas, returning the coating color and smoothness. Price of liquid acrylic - from 1700 rubles.
must be replaced more often:
- aerokompressory, hydraulic pumps;
- and nozzle headers;
- blocks and controls;
- pnevmoknopki and switches;
Tip! Replacement parts baths are best left to the employee service center, it will allow you to get a guarantee and further service.
We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.