Sticking wallpaper with your own hands: sticky natural, fabric, how to glue satin, overlapping plywood

Sticking wallpaper with your hands (54 photos): work with surfaces sticky and natural satin coatings

X

Table of contents

  • 1 Working with surfaces
    • 1.1 remove wallpaper
    • 1.2 Chipboard and fibreboard
    • 1.3 Plaster
    • 1.4 Concrete
  • 2 The use of natural wallpaper
  • 3 Satin wallpaper glue
  • 4 Summing up
  • 5 Photo Gallery

Every owner of a country house or apartment wants his home was not only functional, but also beautiful look. To do this requires that the repair has been invested love. When we are sticking wallpaper with your hands, then put in the work piece itself, so the atmosphere in their own renovated room will delight residents and attract visitors to the house.

Let's look at the walls pasting procedure in more detail.

sticking wallpaper with your own hands

The interior of the premises to be repaired in the first place, depends precisely on the finish. Wallpaper - a unique design tool that can transform your room into a piece of a wooden hut or the area of ​​new technologies, both in science fiction movies. Wallpapers are the background to all of the furniture and set the mood prevailing in the room.

How could pass Wallpapering with your own hands - the video in this article will allow to consider this procedure in detail to understand the nuances, to understand the features of the application of a particular material.

Working with surfaces

Wallpapering your videos hands

Pasting painted wall

remove wallpaper

Before embarking on wallpapering need to prepare the surface for processing. In operation, with the wall, previously wallpapered, it is necessary to remove the old finish layer. Help speed up the procedure preliminary soaking fabrics.

If the wall is decorated with thick sheets, cut them into joints and raid the water directly into the slits. If your walls are painted, you can be sanded and primed, and then immediately start pasting wallpaper, without wasting time on a thorough cleaning.

Chipboard and fibreboard

If you have to glue wallpapers on plywood or other wood surfaces should be thoroughly cleaned. Joints smeared plates and polished sandpaper, and then the surface is dried and grinded again. Then you need to be primed with oil paint wall and you can start gluing the wallpaper.

Plaster

It is difficult enough to paste wallpaper with your hands on the plastered surface. First of all, they should be removed with lime Nabeul and clean the substrate with warm wet cloth.

Cracks found in the purification process, obscure, then wall sanded to remove any residual finish. After that, the surface is dried and cleaned from dust, can now be glued.

Concrete wall in the increase

Concrete wall in the increase

Concrete

Concrete surfaces are porous, so carefully checked for irregularities. Such walls are rubbed clean and covered with a solution. That the wall was not rude, it is rubbed with a brick.

If the surface is entirely of wood, cardboard it is sutured, it can be rolled, or sheet material.

Note! For a smoother surface is moistened cardboard. After drying, it will shrink, and on the wall there will be bumps and waves.

The use of natural wallpaper

Natural decorative paintings

Natural decorative paintings

Natural wallpaper - a material the use of which guarantees a unique atmosphere in the room, leaving the visitor in the quiet woods or reed beds directly from the room.

Fabrics made of natural materials are absolutely harmless and look great in any design, serving as the perfect backdrop for the furniture.

With what begins Wallpapering natural? To begin, lay the rolls in the room, let them lie down at least a day. This is done in order to adapt the web to the room, which will be, a temperature and humidity level.

Make sure that on the rolls are not in direct sunlight or water, all this has a negative impact on their appearance. Before cutting out, check for the presence of roll defects.

The base on which will be sticky, requires preparation:

  • Level the surface of the walls and make the primer dry thoroughly.
  • Minor irregularities can leave, they will not be visible under the textured surface of the web.
Varieties of bamboo paintings

Varieties of bamboo paintings

  • Of course, before pasting will have to delete the old layer webs to the surface and to clean the substrate using a spatula.
  • If the wall has a large crack, it is better to paint over putty.

Glue on the reverse side of the sheet is applied with a roller, if the fabric is too heavy, need to apply the adhesive composition directly on a wall.

Start gluing better from the window, the first band is glued vertically, this is carried out using a vertical line level benchmark.

Slitting rolls into sheets, add 5.10 cm to the desired length.

Note! Similar to the process and sticking fabric wallpaper. When pasting the walls need to be borne in mind that the web is quite difficult and requires the use of adhesives based on PVA.

Specific requirements for tissue webs is the evenness of the walls, even the slightest bulge will be clearly visible on the surface, which does not add grace to your interior.

Satin wallpaper glue

satin wallpaper

satin wallpaper

Satin wallpaper - a kind of heavy vinyl coating. To properly carry out work with this material, it is important to strictly adhere to the technology of their gluing.

If you do not know how to hang wallpaper satin, but had to deal with non-woven cloth, you are very lucky - their methods of gluing virtually identical.

As they relate to the variety of heavy coverings, it is necessary to use a special glue on the basis of PVA and carefully promazyvat wall in front of the application sheet material.

If you got satin wallpaper - how to glue the material to tell the video in this article.

The sequence of works:

  • Preparation of the wall. Removes old coatings, the surface is cleaned and primed.
  • Selected adhesive composition. The type and texture is determined by the type of fabrics and bases.
  • Measured room rolls and cut into sheets of the desired length (length 10 cm plus the wall).
  • It carried out a vertical strip, which will be the reference point for the front page.
  • The combination of sheets. Adjacent sheets are connected to each other end to end, for corners and hard to reach areas it is important to know how to glue wallpaper overlap.Tip! To reliably combine different fabrics, can be pasted on the joint position paper strip.
  • Ironed cloth roller while removing air bubbles.

The most difficult task is wrapping the ceiling wallpaper. Agree that to glue fabric to the outstretched hands quite uncomfortable.

You will need a robust pedestal, and a pair of hands willing to help us. Ceilings and glued back to back, starting from the window.

So, if we are sticking with their hands wallpaper in compliance with the instructions, we will succeed! Repair of apartments without the involvement of hired workers can end quite successfully, more importantly, to make a little effort.

Summing up

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.

Photo Gallery