Glue for wallpaper water-resistant, versatile: what structure is best and how much it needs to be?

Glue for wallpaper: Choose a water-resistant or universal?


Table of contents

  • 1 What makes glue
    • 1.1 Ready-adhesive mixture
    • 1.2 prepare themselves
  • 2 How to choose the glue
  • 3 Summing up

In the process of repair, one encounters the problem pasting the walls. And if the choice of finishing material problems are rare, the gluing process of the strength is not for everyone.

By which the quality of gluing depends? Of course, the type of wallpaper and the glue that is used.

It would seem that choosing a universal glue for wallpaper, we can immediately solve all the problems. Is it really? Let's look together.

wallpaper glue The choice of adhesive, primarily depends on the type of fabrics. Thus, the paper is suitable for glue, home-cooked, but the heavy non-woven or vinyl on the wall, he will not keep.

Usually the manufacturer delivers a special adhesive mixture together with a roll, it allows you to achieve maximum material compatibility and reliability of fastening on the wall.

But what do you do if the material was not the promised package with glue?

What makes glue

Preparation of paste

Preparation of paste

Ready-adhesive mixture

The basis of any glue is modified starch, antiseptic and fungicides, prevents mold and methylcellulose - water-retaining additive. Often add ingredients that can reduce the drying time or destroy the fungi that is perfect for rooms with high humidity.

Prepare the adhesive can be in the home. To do this we need the potato starch and water in the ratio of 1 to 10.

To the mixture, add about 100 grams of dry wood glue dissolved in water and trichlorfon and malathion, for protection against ambient insects. The resulting composition is sufficiently versatile and suitable for any type of coating.

prepare themselves

Cooking steps:

  • Sieved starch.
  • Getting mixture was poured with warm water under constant agitation.
  • After the formation of a homogeneous mass, begin pour boiling water, until the mixture turns into a batter.
  • Thoroughly mix again to avoid lumps.
  • The mixture was filtered through a sieve or gauze.
  • If lumps remain, the paste will boil in a water bath, and drain again.

Hot paste can be pre-lubricated wall to the webs suitable only cold or warm composition.

How to choose the glue

In seeking an answer to the question of what is best for wallpaper glue necessarily look at the recommendations of the manufacturer of wallpaper.

formulation options for wallpaper

formulation options for wallpaper

Now glue for non-woven wallpaper is sold in the form of a dry powder, so it will have to raise their own. If we follow instructions printed on the package, and proportioning, the mixture was safe and will keep the coating.

Of course, there are adhesives, ready to use, which should not be diluted with water and can be applied to the surface immediately after opening the package. Also on sale are formulations in tubes designed for bonding joints.

Classification of the adhesive for its intended purpose:

  • Universal

Its scope is clear from the name. However, the versatility of hiding and disadvantages - such structure can not cope with heavy blades.

Method for breeding adhesive vinyl wallcoverings depends on the application.

  • vinyl

Suitable for any type of vinyl coatings - embossed, embossed, corrugated webs under silk. It is quite easy to use and provides good glide along the wall paintings - it allows you to align and adjust the band to each other.

Note! The gluing process using the adhesive need to firmly press the sheet to the surface. Due to the strong sliding blade can slide, especially if it is sufficiently severe.

  • Light and heavy adhesives

Depending on the mass of webs are separated into light and heavy. The first category includes all kinds of paper. Considered heavy vinyl, fabric, acrylic, metallic, cork and glass fiber.

For lightweight webs using adhesive based on methylcellulose, and for heavy - PVA. Universal adhesives for wallpaper vinyl on non-woven basis made of modified starch.

The final composition for a leaf stickers

The final composition for a leaf stickers

  • water-resistant

This composition is used in a humid room (kitchen, bathroom) for gluing reconstituted webs.

  • Dispersive

This type is used for textiles, and fiberglass. It is characterized by high strength, so to clean the walls of the future will have to use spetssostav.

It should be noted that the adhesives vary in composition. Apart from the main component, they can be used additives that increase strength, moisture resistance, prevent the appearance of mold and mildew.

There are compositions with a reduced drying time, but such is better to use professionals.

How much should you glue to wallpaper? Q - complex response to the determined type of the coating, the material of the walls and the area of ​​the premises. Minimize costs to help special machine for gluing, allows you to comfortably spread sheet.

Now you know what kind of glue for wallpaper better be able to properly perform this difficult stage repair as Wallpapering. We hope all goes well, and soon you'll be glad the new renovated interior room!

Summing up

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.