How to glue cork wallpaper correctly: as well as two types of duplex, foam, adhesive, meter, as the chipboard, wall mounted

click fraud protection

How to glue cork wallpaper (30 pics). Features cork, duplex fabrics. Use of different types. Working with surfaces

X

Table of contents

  • 1 More about traffic
  • 2 Duplex
  • 3 Wallpapering: especially the use of different types
    • 3.1 Self-adhesive
    • 3.2 washable
    • 3.3 meter
    • 3.4 foamed
  • 4 Working with surfaces
  • 5 Summing up
  • 6 Photo Gallery

If you do not know which to choose wallpaper for pasting the room, but you want them to be natural, and cost is not too expensive - your choice of cork wallpaper. Cork - environmental friendly building material made from the bark of the cork oak, is often used for interior decoration of various rooms. For information on how to glue cork wallpaper will be discussed in this article.

What is cork wallpaper? It is the bark of cork oak, plant tissue, formed from dead wood tissue.

surface texture - microcell with air inside, closely interconnected.

In this material a lot of positive properties:

  • Wear resistance. Cork surface is sufficiently resistant to time and mechanical damage.
  • Elasticity and firmness.
    The material is easy to bend and well recovers its shape, respectively, and sticking cork wallpaper is not difficult.
  • Excellent heat and sound insulation properties. In fact, this natural remedy against noise. Furthermore, such webs have fireproof characteristics.
  • Water resistant. The particular structure does not allow water to penetrate beneath the surface.
  • Hypoallergenic. Being glued to flat sheets of cork do not cause allergic reactions.

More about traffic

sticky cork wallpaper

The use of cork in the interior

Typically cork webs produced in individual sheet or roll form. Since their surface no pattern or relief, can only cut them to the desired size strip and stick to the wall.

First of all, you need to prepare all that is needed for quality of gluing:

  • adhesive cork wallpaper;
  • instruments;
  • clean-lined wall.

Such material is only glued with a special adhesive for heavy fabrics on a paper basis. It is believed that the adhesive should be applied to the wallpaper and the back of the canvas, and on the wall.

Cloth glued butt. The seams between sheets are handled specially glued roller and practically invisible.

Angles - the most uncomfortable place for gluing cork, because it is not so flexible. Do not force the sheets into the corner and cut the surplus only scissors.

There are self-adhesive cork wallpaper, which greatly facilitates the work of a novice builder. For their installation, simply remove the film from the back side panels and attach to the wall.

Duplex

how to glue wallpaper duplex

The surface of the duplex wallpaper

Duplex fabric made of several layers of paper stacked on each other, which increases their strength.

Often, their surface is protected by a special moisture-resistant coating. To understand how to glue wallpaper duplex, will investigate their properties.

The most popular variety of duplex coatings are embossed. They can be made in several ways: wet and dry embossing.

This material is easy to conceal small irregularities of the walls, has a wide range of colors and beautiful terrain, not afraid of exposure to sunlight.

And yet, how to hang wallpaper duplex? For this purpose, a special wallpaper paste for heavy coating of starch or a fungicidal additives.

There are also duplex wallpaper for painting. They are covered with a special embossing, and there are 2 types: structural and fibrous. In the first embodiment, the relief surface is obtained by means of several layers of paper and a printing press, in the middle layer of fiber is wood chips.

Embossed wood paintings quite original, but the ability vlagoregulyatsii indoors and complete ecology make them a worthy choice among other upholstery materials.

Wallpapering: especially the use of different types

as a self-adhesive glue wallpaper

Self-adhesive PVC wallpaper

Probably, many novice builders interested in the question of how to hang wallpaper of two kinds. This design method is quite common, in fact is not only a method of decorating a room, but also to hide his shortcomings.

Typically, different types of canvases combine interleaved (horizontal or vertical) or accent used techniques.

Consider a few options that are quite common in modern interiors.

Self-adhesive

What is self-adhesive wallpaper? This material consisting of several layers, the main of which is a PVC film, giving the web a bright decorative appearance. Under the PVC layer of the adhesive is ready to use and protected with a special film.

This is the most common type of samokleek, but there are also others, such as fabric wallpaper self-adhesive base.

Self-adhesive cork wallpaper - a convenient and environmentally friendly material. They are made of paper-based, using a polyurethane adhesive. The main colors: gold, brown, yellow, ocher.

Before you glue the wallpaper adhesive, prepare the wall, remove the old building materials and align it zashpaklyuyte. Mark the surface by comparing the sizes of paintings and its height and then successively remove the protective film from the back of the canvas and place them directly on the wall, carefully leveling.

washable

Washable or washable wallpaper - a special kind, which is to some extent protected from the water. There are several paintings of the degrees of protection:

  • withstands damp sponge;
  • permit the use of detergents;
  • resistant front brush.

On a roll is usually worth the icon on which and can determine the degree of water resistance.

Moisture resistance can be obtained independently coloring the acrylic web or surface covering film in manufacturing (e.g., PVC). There is also a special layer - linkrust, used to protect the paper against water.

Now we'll show you how to glue wallpaper cleaners. If you are lucky, and you have in the hands of self-adhesive, you just remove the protective film from the back of the sheet and stick it on the wall. For the classical bonding method requires the use of a special adhesive for heavy wallpaper.

like glue Washable wallpaper
    Washable wallpapers for the kitchen

meter

The meter wallpaper differ from ordinary? The main difference - a non-standard size, which is, however, fairly easy to use.

Meter fabric reduce the number of seams and joints on walls and much more economical consumption.

Before gluing meter wallpaper - will properly prepare the wall. To do this, you must remove the old cladding, align and putty surface.

The marking of the room is made from one of the corners of the room. Gluing and adhering strips - standard.

foamed

how to glue the foam wallpaper

Foamed vinyl wallpaper

Foam wallpaper - a kind of vinyl. This pleasant to the touch material with a rough surface, decorated with sparkles, well hides uneven surfaces and does not extend, however, is not resistant to mechanical stress. Make such fabric screen printing method, when the vinyl is applied to the base paper.

Before gluing foam wallpaper, pay attention to the type of ground. The thing is that these paintings can not be glued to the mortar and whitewash. But the walls covered with plaster, paint or putty only require equalization and priming.

For gluing use a special glue for heavy weight fabrics, recommended by the manufacturer.

Note! The coating prevents the evaporation of moisture (unfortunately, the mold can be formed) so carefully processed antifungal impregnation.

Working with surfaces

how to hang wallpaper on chipboard

Select a wallpaper for pasting

Let's start with the most common coating and answer the question of how to apply wallpaper on the plaster.

Suffice it to make the primer smooth and clean the wall and you can start to work on the pasting surface.

A little more complex is the question of how to hang wallpaper on chipboard. This material is often used in country wooden houses, because the log walls you will hardly be able to apply wallpaper.

DSP-cooker, of course, is not the best basis for the wallpaper, but with proper preparation it can last long enough.

As a basis we choose the smooth side of the plate, purify it with sandpaper and gloss over all the crack filler for wood. hats nails recessed deeper, and also gloss over, paint over the paint to prevent rust. We coat all joints with putty, we clean and seal the paper tape for plasterboard. This is done in order to avoid irregularities and discontinuities.

Summing up

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.

Photo Gallery











instagram viewer