The design of the toilet room is small in size (33 photos) finishing facilities, the choice of the toilet and bath

The bathroom is probably one of the most problematic parts of the apartment at the time of repair.

A small area of ​​the room limits the host in the media, which can be used for finishing, so the design of toilet rooms are small in size becomes a real headache.

How can cope with these difficulties and make the interior bathrooms beautiful and functional?

In most cases, the decision of problems of a small toilet is the demolition of the partition wall between the bathroom and toilet. As a result, we get a large and spacious room, which have enough space for the toilet, bathtub, sink and even a washing machine.

Of course, the disadvantages of such a solution is and clearly they are seen in the morning in an apartment, where he lives large family. The solution to this inconvenience can become banal sliding partition in home design.

Tricks of the repair of the bathroom

Example design bathrooms

• To save space when installing washbasins can buy bath, tapered at one end.
• By placing a bath across the room, you can win up too much space. Balance short length bath of her depth.
• Bedside table under a sink will not only improve the interior, but also will serve as a place to store household items and bathing accessories.
• Hanging toilet - good space saving. With this solution, you can not break the floor and make a pleasant design, hiding the cistern behind the wall.

Note! Shower cabin has long since become a full-fledged replacement for a bath, but it is convenient in the case. if the family is not the elderly or young children, use a separate cabin for which it will be difficult.

• Mirrors, as the basic design idea, let you visually enlarge the room. Shelves are also better placed in the mirrored doors of lockers.
• Avoid any dark elements in the design of light - your main weapon in the struggle for space.
• Another good method to save space - the sliding doors.

decoration

Color selection

The original solution to save space

Traditionally, the design of the bathroom walls with his own hands using cold colors, but in the case of connecting two rooms, use light green, beige and light blue.

The choice of materials

Tiled flooring and walls necessarily because of the temperature and humidity of the room. For comfort, you can install a system of warm floors, which goes well with tiles.

Ceilings recommended tension as they better withstand moisture. It is undesirable to use multi-level designs that will reduce and so a small area of ​​the room.

Choosing a toilet

squat toilet

When choosing a toilet, answer the following questions:

• Floor or suspension structure is used.
• Location tank: built into the wall, the outer or mounted directly on the toilet.
• Installation of sewer pipes: directly on the floor or the wall.

Each of these options there are nuances, for example, suspended toilets are attached directly to the wall, take up little space and look much more organic than the floor, but the support frame to be done for them, especially if the wall of drywall. Built-in tanks also look pretty good, but their installation will have to exert a lot of effort.

The choice of baths

Whirlpool

For bathrooms also need a bath, you choose from a large range of current can be difficult. Now there are 3 main types:

• cast iron;
• steel;
• acrylic.

Separately, you can also highlight hot tubs.

• Cast iron baths - a legacy of the Soviet past, but their quality, reliability and low cost still make them pretty popular. Material for such baths retains heat well and does not corrode. Of course, the design of the product usually leaves much to be desired.
• Steel - cheaper iron. In addition, the design of these baths is quite varied. Disadvantages - the water quickly cools, and the bathtub itself is buzzing loudly on impact.
• Acrylic - the most common material for manufacturing. bath design can be quite original, but the material is better - worse than the bends, so good products usually do not seem to be very intricate. The strength of the acrylic coating is higher than that of enamel, in addition, these baths better retain heat.

Whirlpool baths can be made of any of these materials, but have features that allow you to achieve extra comfort. Selecting a specific model, of course, it depends on the design and layout of the room repaired.

Summing up

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.

Photo Gallery