How to hang wallpaper on non-woven backing (33 photos): laminating technology

Opinions about how to hang wallpaper on non-woven backing is often at odds. Why? Because there are several technologies, which we hasten to tell you.

Non-woven backing: to be or not to be

Features and Benefits:

• roll width is 1.06 m. This significantly reduces the number of joints in the finishing.
• Improved wear resistance of the material and resistance to abrasion.
• The ability to hide the various cracks and other defects on the surface.
• When disassembling can be easily removed from the wall in a dry form, do not require additional time and effort to soak.
• Exhibit high lightfastness.
• The possibility of wet cleaning.
• Air and steam is passed, however, unlike the conventional paper without changing its structure and sizes.
• The possibility of multiple painting, which will allow you to change the interior of your room as often as you want.

This finish is made of ecological materials, and meet high sanitary standards. It can be pokleit not only for decorating the walls, but also on the ceiling.

laminating technology

Step by step instructions pasting wall in problem areas

So, it's time to learn how to stick the non-woven wallpaper.

Preparing walls

The process starts with preparation surface. You must make sure your wall is completely flat and free of cracks or other visible defects. it must also be properly cleaned of old coatings.

In order to get rid of the old coating, the wall is wetted copiously with water (warm) sodden wallpaper removed spatula.

If your wall is not perfect and in need of repair, before the glue non-woven wallpaper in the corners, and other problem areas, it is necessary to align the surface of filler and primer.

Tip! Primed surface can be weak adhesive solution.

Ask the expert - how to hang wallpaper: non-woven wallpapers have to be glued on a dry and flat wall in the absence of drafts.

The main stage

Having dealt with the preparatory stage, start preparing canvases directly for further pasting and coloring, for this, cut them into strips. Do not forget to leave allowances of 10 cm on each strip.

On the issue of how to glue non-woven wallpaper, experts recommend not to apply the adhesive on the back side of the web, as is done in conventional pasting paper webs premises, but only on the wall.

Another positive quality of this type of finish is the lack of need to withstand time to impregnate the fabric.

Mix the glue with water according to the instructions on the back of the package

This material provides complete stability of shape and size of sheets.

Determine to the method of applying adhesive to the wall, with particular attention to the tips listed in the instructions on the glue, and a roll.

problem areas

If the classical method of pasting is not a problem, the question of how to glue non-woven wallpaper in the corners often visited by beginners house masters.

In this case it is best to glue the web overlap 3-4 cm and use the technique of double slit. The two webs are superimposed and cut by the rugged shapes or special spatula knife, excess was removed.

The next item that requires attention - how to glue non-woven wallpaper correctly mounted sockets places, radiators, switches.

A variety of textures and colors

It is necessary to lubricate the edge of a small amount of glue for greater reliability of their attachment to the wall surface. Getting glue on the front of the canvas is extremely undesirable. If this does happen, remove the glue with a damp cloth as soon as possible and pat dry.

Gluing fabric near the outlets and switches should be cautious when electricity is off. After drying the adhesive to penetrate the hole location and fold the web edge.

Start to glue fabric to be from the corner, moving from top to bottom. Remember consistently smooth surface in the vertical direction or a special brush roller.

Take care that the pressure was not too strong, and that a new canvas bear a strictly butt to the edge of the previous one.

When pasting the ceiling technology remains the same, except for the need to attract a partner.

One way of efficient and rapid removal of old coatings

Paint and glue

What glue to glue non-woven wallpaper? We recommend that you use:

• Quelyd (Kelid);
• Emcol Universal;
• KLEO Line Optima;
• Metylan Fleece.

If you want after pasting, to paint the surface, it is better to use water-based paints that are resistant to abrasion and wet cleaning.

EXAMPLE colored coating

You can use a latex or acrylic paint with the effect of silk, which will help emphasize the characteristic texture of the canvas.

After the surface has dried, it is possible to apply the first coat of paint, using a suitable roller size.

The following paint layers can be applied after a few hours.

Thinning with water at the same time it is strictly prohibited. On this and on how to properly glue non-woven wallpaper - a video in this article.

Summing up

We hope our article has been helpful to you. In order to more accurately understand the technological and practical issues on our website provides detailed photo and video instruction, in which you will find useful information on the question.

Photo Gallery