A pipe box is needed to ensure that the room has a neat and finished appearance. The need for a box is due to the decorative beauty and aesthetics in the interior. Nobody likes it when there are ugly pipes sticking out in the apartment. A box is an excellent option to hide all sewer pipes and pipes for water supply.
-
- Why you need to install a box in a bathroom or a bathroom
- We decide how to make a tubing for
- We decorate a bathroom: how to make a plaster board for pipes
- We put a box for a sewer pipe
- Why do I need to install a box in the bathroom or a bathroom
When we do repairs in our bathroom or bathroom, then surely we are faced with the problem of open tubes.
This can be solved if you make the installation of the box.
Open pipes from any normal person will cause aesthetic discontent. It's just plain ugly. Therefore, we come to the question of how to close these pipes. To do this, you need to use a pipe box. Today in the market you will find two ways how you can close ugly pipes: using plasterboard or plastic. To do this, a special construction is created around the pipes, which closes access to them.
Installation of the tubing in the bathroom is necessary for both aesthetic appearance and for easy access to them.
The construction consists of: walls and a hatch. Walls are usually made of plasterboard or plastic. The material of the hatch can be any.
Walls are ordinary partitions on the frame, which are needed to hide pipes. They are surrounded by a beautiful wall. But to access the pipes you need to make a separate window, that is, the hatch. At the same time, when creating the design of the box, it is necessary to take into account the free space for future repairs. If you need it, of course. But such a probability must be taken into account. To do this, leave enough space between the pipes and the walls. Therefore, for plumbing there will be no problems with access to pipes for their maintenance and repair. Therefore, the bathroom box or bathroom should be placed in each house.
Decide how to make a tubing
The box is a decorative element that ennobles the pipes in the bathroom. Thus you close the ugly parts of communications. Therefore, you need to know how to make the box correctly, so that later there were no problems in the toilet or bathroom.
The box can be made in three ways:
- Use gypsum board that will be moisture resistant;
- Use wall panels. They are usually made of pvc;
- Use plastic ducting.
The main feature of each material is the increased moisture resistance of
The bathroom will have a high humidity, so it is important that the material does not lose its properties over time.
The box must be made in such a way that they completely cover all the pipes. In this case, it is important to leave free space. This is necessary for repair work. If something happens to the pipe, the plumber must have no problem accessing the pipes without problems.
We decorate the bathroom: how to make a plaster board for pipes
One of the options for decorating a bathroom is to make a plasterboard box for pipes. Drywall is inexpensive, and therefore popular with people.
In order to make a box you will need:
- Metal profiles, in addition, galvanized;
- Fasteners;
- Silicone sealant;
- Sawcloth and putty;
- Inspection hatch.
Profiles must be metal and galvanized. Of these, the frame will be assembled. Fasteners are self-tapping screws, dowels and nails. Sometimes you may need a plumbing tool, but it is necessary in rare cases. With their help, you need to connect the supporting structure, fix it to the floor and walls. Fasteners are also needed to fix the sheets of plasterboard. Serpanka with putty will be used to cover the ugly parts of the sheets - joints. A revision hatch or door for opening is needed for maintenance of pipes.
Gypsum plasterboard case for pipes is good in that it is the cheapest
How to make a box:
- Make a marking of the walls. We check the level of its tilt with the help of a level. We avoid that markup when the box will interfere with the opening of furniture or doors;
- We collect the frame. We cut metal profiles with special scissors.
- We put parts of the frame on the floor, part of the tile and the wall. We must begin with them;
- We put the vertical parts of the frame;
- We put the upper guide. It will connect all the elements in a single construction;
- We put auxiliary guides. They are needed for situations where you need to have access to the box. This is necessary for pipe maintenance and repair.
- We attach the inspection hatch.
Make sure that each part of the metal profile is firmly fixed and does not stagger from side to side.
Each profile must be connected with screws. In the people they are called sunflower seeds. To do this, you must make a notch on the metal. It will stop the sliding of the screw tip. They will easily include the components of the entire structure.
If you do not want to spend money on a specialist, then you can make a box yourself. In this there is nothing complicated. Only basic skills of metal carving and ingenuity are needed. So, go for it!
We put the box for the sewer pipe
The box for the sewer pipe is put practical in all the bathrooms and toilets. It is needed in order to hide the ugly sewage pipes. Therefore, its necessity is out of the question. Put it right.
The sewer stand can be concealed in two ways:
- The plasterboard box;
- Box made of plastic profile.
Plastic removable panels are more durable than plasterboard A gypsum cardboard box is a budget collapsible variant that will last you for decades. It is today the most popular in order to hide the ugly pipes. A box made of plastic panels is also reliable. However, its installation lasts longer than the installation of the Hypocarton structure.
To supply the sewer pipe, it is necessary to mark out and measure your bathroom or bathtub. Next, calculate the necessary materials for the box, determine the choice of material from which your box will make. Then we make a marking of the location of the control elements. We fix the wall profile, then we make a frame and fix the plasterboard or plastic panels. The last step is to put the hatch. Everything, the pipe from the pipes is ready.
The sewer box fits perfectly into any bathroom or bathroom. This is a decorative necessity, so you can choose different colors of plasterboard or plastic on the market. But remember, the main reliability and quality of the material.
How does the tubing look like( video)
The pipe closure closes perfectly with any bathroom or bathroom. You can choose a box of different colors, which will give your bath beauty and harmony. The installation of the box does not take much time, so do not delay the purchase of all materials. In the end, you get a beautiful bathroom or a bathroom without ugly pipes. It's worth it.
