Hothouse with their own hands from the profile: drawings for free and greenhouse, plastic arcs how to make, videos and profile logs

It is not difficult to produce greenhouses from the profile, so any person can do it after studying the theory. To make different in form greenhouses is quite feasible, and completely from different materials that are on sale, in particular their different profiles. More details on installation and manufacturing - below.

Different profiles for greenhouses

It is possible to make a greenhouse with your own hands from the profile, only it is necessary to perform calculations in advance and determine what is specifically intended forThe greenhouse is meant for year-round use or for seasonal use only. If the greenhouse is to be used only in the summer, then it will not require a powerful sealing frame. During construction, summer residents use a galvanized profile.

The galvanized profile used in the construction can be practically anything. Some craftsmen for the seasonal greenhouse use an option designed for drywall.

Profiles for the manufacture of greenhouses can be purchased at the

Most often, it is used to produce a double-hulled greenhouse, or a one-run hothouse. If you plan to use the greenhouse year round, it is best to cost from a galvanized square tube, usually use a size of 20x20 or 20x30 mm. The amount of the profile is purchased based on the size of the greenhouse, and for this purpose preliminary drawings are made and the necessary calculations are carried out. A solid foundation is necessary for a year-round greenhouse. Traditionally, it is made of concrete.

After the concrete has solidified:

• A profile is mounted on it;
• Attach with dowels to the concrete base;
• Vertical racks are fastened to it with the help of self-tapping screws for metal;
• To the last - inclined( future roof of the greenhouse).

All sections of the profile, as well as the holes obtained from the screws, are treated with cold zinc, which, as it were, will seal the places of the spills and holes, and protect the profile from rust.

If you plan to build a large stationary greenhouse that you do not plan to move, you can fasten the profile between yourself by using electric welding. After welding, these places must be sanded with sandpaper and processed with cold zinc, and preferably in several layers.

A strong greenhouse from the profile

A greenhouse in its garden can be built by almost any gardener, traditionally used for making a greenhouse tree. But the wooden hothouse collapses fairly quickly, and it's better to use metal anyway. The most simple material in processing is the metal profile. Profiles come in many different shapes, and they are made of galvanized steel or aluminum.

The easiest way is to cost greenhouses from the profile of PS 50x50 and PN 40x40.Vertical racks are made from PS, and PN-shaped are used to make all horizontal racks. Also, there are special already curved profiles, which are convenient to use in the construction of a greenhouse.

For fixing profiles with each other, use self-tapping screws for metal, it is best to use a hat type without a drill.

In advance, it is necessary to drill holes with a thin drill, and screw in them already. Crabs, suspenders, etc. can be used to fasten the profiles together.

Among the advantages of greenhouses from the profile, it is worth noting the long service life and extensive functionality of

For the convenience of manufacturing greenhouses:

1. You can first collect the frame of the greenhouse, for example, the end.
2. Then connect them with pre-installed side walls.
3. After the roof is also mounted from the profile.
4. When the main frame is ready, it is possible to install doors and windows on hinges.

Locations of all joints, holes and also cut sections of profiles are treated with a special spray - cold zinc.

In the northern regions of Russia it is recommended to use a profile with a width of 100 mm, while the rigidity level of the frame in such a greenhouse will be higher. After the polycarbonate sheets can be fastened to the frame, they are also fastened with special screws. In order that in winter the greenhouse can not be deformed, it is possible to remove the roof and remove the polycarbonate sheets for storage. This self-made heifer can last for many years with appropriate care for her.

Durable greenhouses made of plastic profile

Some gardeners make a greenhouse of plastic, as a basis for organizing a greenhouse or a small greenhouse use plastic arcs that are covered with a film on top. For greater strength, such arcs can be connected together along a thin plastic pipe. Such a hotbed can be assembled very quickly, to put as many plastic arcs in the garden as needed, and the length of such a hotbed will only be limited to a long bed.

If you want to collect something more thorough and larger in size, then:

1. Traditionally, an arched greenhouse is made of plastic profile, it is necessary to fence the planking with boards and firmly fix them with each other.
2. Along the boards from the inside, it is necessary to insert into the ground at a distance of 80-90 cm so that their height above the ground is about 30 cm.
3. The plastic arcs are cut one into two and are connected back together by means of plastic crosses.
4. Then, on one side, the arcs are put on the armature, bent and put on the armature on the other side.

The plastic profile can be painted in any color

The pipes to be installed horizontally are cut to the required size and installed between pre-mounted crossings on arcs. For reliability, they are welded using a special soldering iron for PVC pipes.

At the end of the assembly, also a PVC door is made, after that, when everything is ready, the frame of the future greenhouse is covered with a film, and from the bottom it is nailed to the boards with the help of rails.

Further, in order to prevent the film from breaking off from a strong wind, it is possible to pull the twine on top of it and fix its ends on a wooden base. It is possible by analogy to make a hothouse from metal-plastic pipes, only to bend them at the right angle, you need to use profile rollers.

Necessary drawings for the production of greenhouses from the profile with their own hands

You can independently design a greenhouse of almost any shape and size from different materials. Moreover, some materials can be found free of charge on construction dumps, in particular different profiles and trimming of plastic pipes. Only need to perform the calculation by watching the training video, and draw the drawings so that you can properly cut the material and calculate its volume. The most often made of a greenhouse made of wood, since this material is easy to process, it is possible, if necessary, to increase the size of the greenhouse in length.

Also, when constructing this type of greenhouse, you can combine different materials:

• Plastic;
• Metal;
• Tree, etc.

Drawings of greenhouses from the profile can be made both on paper and with the help of the computer program

Polycarbonate sheet is also easy to attach to the wooden frame with self-tapping screws. There are other types of greenhouses that can be made from other materials, for example, they are made from scraps of plastic pipes, metal-plastic ones made of metal profile, the main thing is that its thickness allows not only to maintain its weight, but also the weight of the oilcloth.

In order for the greenhouse to withstand the weight of snow and other bad weather in winter, it is necessary to provide for the creation of a reinforced frame that will successfully resist the bad weather. For example, the zigzag profile system is ideal for this.

Those who do not want to tinker themselves with the construction of a greenhouse of any material can purchase ready-made kits, the sale of greenhouses is usually carried out through retail stores. Also ready-made greenhouses, for example, Omega brands are popular. You can order the production of a greenhouse, in almost every city there is a factory that can perform private orders for previously made drawings. And the production, for example, of a profile greenhouse does not take much time due to good equipment.

Greenhouses from the profile with their own hands: drawings( video)

Thanks to the above, each person can build a greenhouse, a greenhouse and make several canopies that can cover the pool or parking lot for the car. And, for the construction of such structures, you can use almost any material.