Mounting the tank to the toilet: installation of drain, fasteners, bolting, pick up instructions, put on video

Secure the tank to the toilet bowl is easy, with which even a novice would do well believed that on how well done the toilet installation, namely, mount it and the tank depends on whether the problem soon arises with the plumbing. You can connect these parts yourself, the instruction will come to the aid.

order was set: how to pick up the tank to the toilet bowl

When choosing a tank of the majority of buyers interested in its appearance, price, and the collecting tankwater. The shape of this object should be reliable, the tank should not have visible defects, cracks, chips, and other damages.

If you decide to pick your own tank to the toilet bowl, in which case you must take into account their design and appearance

Choosing a tank, pay attention to:

• The way it is attached to the toilet bowl. Sometimes it will be a one-piece design with a bowl, or the tank will be hung separately, or even it will be hidden. The assembly depends on the location of the tank, sometimes only bolts( one-piece bowl) are needed, and in case of hidden fixing, a frame-installation is required.
• The way the water is supplied to the tank. There are tanks with the bottom, back and side connections. Side lining is considered the most common.
• Which type of reinforcement is used. It can be a device with a lever, one or two buttons. A device with two buttons is considered to be the most effective, since the water on the drain is consumed more economically.

But you need not only the barrel itself. You will also need to buy drainage fittings, stop valves, piping, and a plumbing polymer tape. The latter is used to further seal the threaded connection.

Procedure: how to install the tank on the

toilet bowl It all depends on which device you purchased. Each mounting option can be considered separately. And start with the canopy.

In order to install the tank on the toilet, you can additionally get acquainted with the detailed master class

Installation of the hinged tank( old sample):

• The flushing pipe with a diameter of 32 mm is joined to the bottom of the drain tank;
• Then the marking is done, the tank should be attached to the wall at a height at which the lower end of the pipe was opposite the inlet pipe of the toilet bowl, the one on the floor;
• After that, markers or markers are applied to the wall surface with a marker or pencil;
• Drilled holes for the brackets, the diameter of the tools should match the dimensions of the anchor bolts or dowels;
• Finally, the brackets are fastened to the wall, and on them fasten the storage tank.

It's worth mentioning that it is not difficult to attach hinged cisterns, but they are very rarely used. Usually such old designs are removed to no longer be in their place, and below put a new, modern tank. But for someone a good version of the hinged design, well, you can screw it.

Integrated model: fastening the tank to the toilet bowl, instruction

It will talk about how to set up the structure on the shelf the bowl. This installation requires a rubber gasket. One such gasket is installed on the bowl. Usually it has already been given a special adhesive compound, which fixes it in place. But if the composition is not, then you need to buy a sanitary sealing gel.

studying special instruction, you can own hands to fix the tank to the toilet without the help of professionals

If you use this special gel, then the gasket must be smeared on both sides, because it is attached to the toilet seat alone, and the other is already attached to the flushing cistern. Sometimes a rubber ring is additionally used, which seals a drain hole on the bottom of the tank.

Then proceed as follows:

• To fix the tank on the bowl of the toilet use bolts with tapered rubber gaskets, they are inserted into special holes and screwed with nuts from below densely;
• To prevent water from escaping from other openings, use rubber stoppers - they are also lubricated with gel before the installation so that the connection is as tight as possible;
• The installation of the drain fastening is then carried out, the water supply is connected.

During the last operations, make sure that all diaphragms, gaskets and gaskets are in place. Polymer tape, protecting from leaks, it is necessary to wind on the external thread of the inlet branch pipe. And the final moment will be tests. Unscrew the shut-off valve and fill the container with water. To adjust the liquid level, use the float on the screw or rocker arm.

What bolts are used to secure the tank to the

toilet bowl? Quite often water flows from the tank if steel bolts are rotted in the structure. Of course, they need to be replaced. Get a new set of bolts for your toilet, and replace them.

In order to secure the tank to the toilet, use only high-quality and reliable bolts

And it is done this way:

• The water must be cut and removed from the tank, as well as the rusty parts;
• Unscrew the nut, disconnect the shut-off valve of the flush tank;Unscrew all broken bolts;
• ;
• Remove the drain tank from the tight rubber gasket;
• Remove all old bolts, even if one of them is intact;
• Clean connection points;Screw in new steel or brass bolts;
• ;
• Install the tank on the shelf, fixing first the gasket of the tank;
• Carefully tighten the fasteners.

And, as always, comes to the end with all verification. Leakage should not be. But, by the way, it happens that the leak begins for two. Therefore, for the first few days, look at the tank for leaks.

Installing the toilet bowl( video)

Modern fasteners, gels, sealing elements - today everything is produced as convenient as possible for the self-installation of sanitary ware. Buy reliable compact kits, with a clear instruction, suitable for your toilet model.

Successful work!