Ceiling whitewashing: how to whiten over the old and than in the apartment, finish yourself, photo, video

Whitewashing - the most economical and environmentally friendly way to repair the ceiling Whitewashed ceiling - not some obsolete technology, but one of the classic ways of decorating the ceiling. In doing so, you can do everything yourself and quickly enough. To repair is not delayed, and did not have to be distracted by the correction of defects, it is necessary to prepare a tool and a ceiling in the room itself.

Finishing the ceiling by whitewashing yourself

Everything begins with the preparation of the tool. The preparation is to select the tools that you will use to bleach the ceiling.

Works can be made:

• Brush;
• Roller;
• Spray gun;
• Vacuum cleaner with air blowing function.

Everything starts with choosing a brush for whitening - what kind of tool you will work with, so will the quality of work. Types of brushes are very different, but the best option is a brush made of natural bristles, width - 15-20 cm before using the brush, for several hours, soak it in water. So the wooden handle of the brush will swell and the bristles will be fixed.

To avoid any traces of pile on the ceiling, the whitening brush must be made of natural fiber only.

This is important, because the bristles should not remain on the whitewashed ceiling surface.

Use and rollers, and, the quality will be better, and the process will go faster. When using the roller, do not forget about the special tray.

Than to whitewash the ceiling in the apartment: the composition of

You can whitewash with the help of lime or chalk - these ways of whitewashing your own hands are the most popular.

To dilute chalk whitewash, it is necessary: ​​

• Pour 30 g of PVA glue into the warm water( glue base is mandatory), as an alternative - finely planed ordinary laundry soap;
• Stirring the mixture, pour finely sifted chalk into it;
• 20 grams of blue in solution are also mandatory - this is the prevention of yellowness of the composition.

It is not necessary to take exactly the glue PVA, it will be correct to use both joiner glue and bustilat.

Calcareous whitewash is done as follows - dilute 1.7 kg of lime with 40 g of blue water. It turns out the finished mixture, which can be applied to 10 squares of the ceiling or walls.

Recipe for calcareous whitewash( video)

Steps of whitewashing the ceiling with your own hands

If you decide to whiten with a brush, then the strokes are first applied perpendicular to the light source - that is, the windows. And already the final layer is applied parallel to the windows. In this case, the white surfaces are monochromatic, without strips.

The roller to bleach the ceiling is even easier. The technology is as follows - pour the solution into the ditch, immerse the roller in the solution, roll the roller along the slope of the pallet. At first the smears go to the windows, then parallel to the windows. Overlaps should be about 5 cm. Otherwise, there will be unpainted zones, and it will seem that the ceiling is either not finished, or painted in different colors.

In the joints of walls and ceilings, it is more reasonable to use a brush.

How to whitewash the ceiling in the old whitewash and can

Renew whitewash only if the old layer is very thin and durable. But even in this case, experts advise still to clean the old whitewash. This will ensure a good result - without divorce and other defects, such as bubbles and streaks.

The old chalk whitewash is removed with a sponge soaked in a soapy solution

The old coating can be removed with a sponge, soap solution and paste. The chalky solution is removed very easily, therefore, it is foolish to apply a new whitewash without washing off the old one. But with the limy composition will have to tinker. Without a wide spatula is indispensable.

And no matter what you decide to do next - to glue the ceiling tile, ceiling whitewash vodoemulsionkoy or re-whitewash, old, always remove a layer. And then comes the primer, putty, sanding and whitewash itself.

Undoubtedly, if the ceiling with defects, you will have to repair the cracks.

Like shpakril for whitewashing the ceiling

Definitely - yes!Moreover, whitewashing with shpakrilom is painting works in the complex. Putty "Shpakril" - this is the sealing of small defects, and the gluing of the ceiling. Such an adjacent functionality of the composition you save on materials.

fine-grained putty "Shpakril" is perfect for the leveling of the ceiling in front of whitewash

Simply dilute this plaster with water, about a pint at a kilo of material, and directly Beli ceiling. Methods of application

This can be done:

• Spraying recently popular airless spraying;
• usual roller( the tool should be either long synthetic fur or fleece);
• Brush.

Use airless help evenly distribute the solution over the surface of the ceiling

By the way, even though the roller is easier to work, but usually colored vodoemulsionkoy ceiling is a merit roll. There are also new methods, usually associated with spray guns and sprayers.

How to whitewash the ceiling in different colors( video)

Today whitewashed ceilings in the kitchen, in the bathroom, in the hallway and the bathroom, in the business premises. The way of decorating the ceiling is quite fast and cheap, so do not dismiss it as unsophisticated. This is a classic way, because it has a long time to be in demand.

Success in repair!