Baguette for stretch ceilings: photo how to glue and how to mount, sizes, how to fasten, types of baguettes, PVC and installation of wall, plastic and gapless

Stretch ceiling in the house - a thing popular nowadays, but do not forget that the choice of a baguette depends to a large extent on the quality installation of the tension ceiling Stretch ceiling in a house or apartment - a thing has long been not sky-high, but quite real. Stretch ceilings, for many reasons, have ceased to be the prerogative of only rich people. Relatively inexpensive material, rather simple installation, made this kind of decoration available to most apartment owners.

Recently, such ceilings as perforated and 3d ceiling have become especially popular. They can be seen both in Karaganda and in Saratov, both in Minsk and in Zhytomyr. The popularity of the fabric ceiling has grown, more and more of the soaring ceilings appear. The latter is better to look at the photos and videos to clearly appreciate their magnificence. The cornerstone for installation is a baguette for stretch ceilings, from the choice of which, and also from the ability to work with it, the quality installation of the stretch ceiling largely depends. In order that your ceiling pleased you for many years, and not callous eyes before the next repair, and even at all, did not cause the "construction of the century" and endless rework, you need to choose the right materials, the list of which includes the baguette.

How to glue a baguette to a stretch ceiling: a simple tip

Many ask how to attach a baguette to a stretch ceiling when there is a need to paste a plastic baguette in order to ennoble the wall-ceiling joint.

In this situation, two opinions can not be: baguette categorically can not be glued to the tension ceiling!

Stretch ceiling - a fairly thin film, which can be accidentally damaged, say, with a knife. But this is not all the nuances that can ruin the stretch ceiling, and, irrevocably. The integrity of the film can be disturbed, and therefore, during installation, the finishers work very carefully and carefully, so that, for example, the joint does not break. However, if you try to glue the baguette directly to the ceiling, you can also ruin the surface.

During installation, you should work very carefully when attaching the baguette. It is not recommended to glue the baguette directly to the ceiling

Causes of damage to the ceiling when glued:

• A thin stretch ceiling film can be dissolved with glue. Not knowing thoroughly the chemical composition of the film and glue, this can be done easily, but it's hardly possible to fix it.
• Stretch ceiling is not a rigid structure, and the film, even at the slightest push is mobile. Therefore, hardly a sticker will turn out neat.
• The adhesive after drying can give some stretch of the ceiling, which will have a detrimental effect on the appearance of the film.

Thus, in order to successfully avoid the above nuances, the glue must be applied to the surface of the baguette that will contact directly with the wall. What kind of glue can be used for this, you can find out from the seller-consultant in the construction shop. Suitable, for example, liquid nails. There are a lot of adhesives, and to answer the question, what exactly needs to be glued, it is simply not possible to exhaustively!And the sticking itself is simple, and most importantly - neatness.

And there are situations when suddenly a certain technological gap forms at the junction of the wall-ceiling joint. It seems that the baguette sticker begs, but, for this case, a flexible masking insert is provided. It is easy to put, and not less easy to dismantle as needed. Baguette is not always appropriate because of the increased curvature of the walls.

Stretch ceiling: installation of the baguette with your own hands

The baguette can be assembled by hand, without the help of specialists. The simplest task is the fastening of baguettes from PVC.Any baguette for a stretch ceiling is installed on the wall.

Consider how to install a baguette of PVC.

Installation:

1. After measurement, cut the baguette to the desired size;
2. Drill holes in the baguette with an electric drill;
3. We make the layout of the response holes on the wall;
4. If the wall is made of wood, then this fastening is considerably simplified - simply fix the baguettes by means of screws, and if the wall is made of concrete or brick, then the holes are pre-drilled under the dowels with a perforator.

The fastening of a baguette made of PVC is the most simple task that you can do yourself

As you can see from all this, this work does not present special difficulties - you need only patience and accuracy. The PVC baguettes are not even installed by professionals, since, as can be seen from the above, the fasteners are simply elementary. If the installation of aluminum baguettes has difficulties associated with drilling aluminum, then when drilling PVC baguettes such problems do not arise.

Recently, there are three types of installation of stretch ceilings: a beak( special tape), harpoon and wedge.

Quite often a gypsum board is used to reinforce the design and installation of heavy gypsum stucco and backlighting.

Baguette dimensions for stretch ceilings: without a wide spread

The bag for stretch ceilings is not only an important component, but also a guarantee of correct and reliable installation of the tension ceiling.

The length of any profile, regardless of material, is, as a rule, 2.5 meters.

The dimensions of the baguettes have different widths and heights, depending on their profile. The standard length varies from 2-3 lm and the average width is 26-28 cm.

Baguette dimensions, depending on their profile, have different widths and heights.

Dimensions by type:

• Wall paper baguette PVC.The width is 27mm, the height is 10mm.
• Baguette wallless. Width - 28mm, height - 13mm.
• Ceiling molding for seamless ceilings. The width is 27mm, the height is 12mm.

All the mentioned baguettes have one length - 2, 5 m. Thus, the standard length varies from 2-3 lm, and the average width is 26-28cm.

How to fix an aluminum baguette for stretch ceilings: the correct recommendations

Let's consider step by step how to fix an aluminum baguette. This baguette is made on automatic lines, on high-quality equipment, and therefore, all components are manufactured with high accuracy. This construction is very strong, you need to drill the connections with a drill, which creates additional laboriousness.

Step by step:

1. The baguette is cut to the required size;
2. The holes in the baguettes are pre-drilled with a drill. It will be more convenient to do this on the floor or on the table. The distance between the holes is about 20 cm. The distance from the end of the baguette to the first hole is approximately 5-6 cm.
3. Elements are applied to the wall. In this case, a level is used, or a pre-drawn line. We make the marking of the walls for the holes.
4. After removing the baguette, we drill holes in the wall using a perforator.
5. Fasteners are manufactured using impact dowels or self-tapping screws.

Aluminum baguette is a very robust construction, so you will need a drill

for the connection. Cutting the baguettes is done either with a metal hacksaw or with a "Bulgarian".

The level of installation of the tension ceiling, as a rule, is below the base ceiling by 3-4 cm. The length of the screws is 3cm, the diameter is 6mm. It is with such fasteners you can be one hundred percent sure of the reliability of the entire design!

Types of baguettes for stretch ceilings: the design takes into account all

The entire stretch ceiling design is based on a baguette.

If the canvas is properly stretched, then it does not sag, keeps its original form for a long time, and pleases the eyes of the landlord.

Baguettes for the ceiling are of several types.

Baguette types( profiles):

• Wall mounted;
• Ceiling;
• Separating;
• Universal;
• Fixing.

There are several types of ceiling moldings, therefore, before choosing a particular baguette, think about why you need it( for example, for splitting or fixing, etc.)

This, the baguettes are divided into invisible and visible. This means that if one of the edges of the profile is visible, and is somewhat lower than the stretch ceiling, then such a baguette is called visible.

In addition, these profiles are further subdivided by type of material:

1. Aluminum;
2. Plastic.

Aluminum baguette is the most popular, despite its higher price.

Its advantages:

• It is, of course, more durable, and reliable.
• Aluminum baguette appeared on the construction market a little before the baguette of PVC.They are accustomed to use as designers, and finishers.

The disadvantages of this profile include its heavier weight, as well as the fact that the aluminum profile is difficult to use for two-level( or more!) Ceiling curvilinear systems. Drilling profile for self-tapping is more laborious, and inconvenient.

Baguette PVC for stretch ceilings: cheap and angry

Baguette PVC( it's also plastic), of course, much lighter weight aluminum baguette, and more mobile.

This baguette has a number of advantages over aluminum baguette.

Advantages:

1. The baguette is ideal for curved ceiling systems, and is also widely applicable for multi-level ceilings;
2. Inexpensive costs, in comparison with aluminum;
3. The cost of works related to the installation of stretch ceilings, when using PVC baguette, is much lower;
4. Most decorators prefer to work with this profile.

Baguette PVC for stretch ceilings is much lighter in weight and more mobile, but when buying carefully check the quality of the material

However, the profile of PVC has significant drawbacks.

Disadvantages:

• If there is a significant tension in the ceiling, the plastic rack may be deflected, until it breaks;
• Profile material is not always of high quality.

Based on the above information, taking into account all the advantages and disadvantages of the profiles described, it is necessary to make your own rational choice.

The price of materials is almost a decisive factor in the era of budget repairs.

And only after weighing all the pros and cons, you need to finally decide on the choice.

How to glue a baguette to the tension ceiling( video)

And in conclusion, I would like to note the following. Stretch ceiling - one of the most common and aesthetic types of ceiling finish. It is an excellent alternative to gypsum plasterboard. Of course, everyone wants to make quality repairs, and, with minimal costs. As you already understood, an important role in this event is played by the material from which the baguettes will be used. To say unequivocally which are better is impossible, since this will not be entirely correct, because any material has its advantages and some drawbacks in doing so. So, having consulted with masters, sales consultants, and also soberly weighing your budget, you need to make your right choice. Good luck in arranging your home!

Baguette for tension ceilings( photo)