Installation of warm ceilings: water and electric, which is better, with their own hands film, the device

Mounting warm ceiling - it's not the easiest, but do the job yourself is realistic Many people have insulated walls and floor with the help of infrared panels. However, in recent years, heating devices are increasingly installed on the ceiling. Installation of panels on the ceiling is carried out in almost the same way. You can install the construction yourself, provided that you correctly work the surface and select suitable materials.

warm ceiling: the principle works and furnish

When the panel power begin to warm up and release heat to the surroundings. After a certain period of time, air starts to heat up.

For the installation of warm ceilings, a thermostat must always be used. It will automatically adjust the temperature of the air in the room. In addition, the thermostat will protect the system from overheating.

film electric ceiling operates in the same manner as floor heating

Warm ceilings consist of:

1. fastening material. The choice of a particular product will depend on many factors. If the ceiling is finished with Panels like Armstrong, it is more expedient to use U-shaped suspensions or baguettes.
2. IR panels.
3. Cassette.
4. Heat reflecting layer.

After mounting the IR panels, you need to use some kind of finishing material. It is recommended to give preference to materials based on gypsum. Excellent fit drywall sheets. It should be noted that it is necessary to cover the heating films with a special incombustible material without fail. If you do not want to use gypsum mixes, then you need to reduce the capacity of the heating system.

Warm water ceiling: the benefits and features

infrared heat ceilings today are relevant. This method of insulation is very practical and durable. Water electric ceilings are suitable both for finishing private houses from the timber, and for finishing the apartments. However, it is not recommended to use such a system in rooms of small dimensions.

With the help of such a system, your house will be warm, but not stuffy.

Unlike other heaters, warm water ceilings do not overdry the air. This feature allows you to choose the optimum air temperature in the room

The benefits of warm water can also be attributed ceilings:

• easy installation. Installation can be done in a matter of hours. The main thing is not to neglect the fire safety technique and follow the instructions.
• Noiselessness. Warm water ceilings are better than other heating systems, since they do not create noise and vibrations during operation.
• Materials for warm water ceilings are made of environmentally friendly materials.
• Water ceilings can not be harmful to health, since they do not emit harmful radiation.
• Water ceilings are not prone to fire.

Installing a warm electric ceiling

Installation must begin with the selection of suitable materials and calculation of the ceiling heating system. During calculations rely on the dimensions of the room. Remember that the power consumption of IR films should not exceed the power consumption of the thermostat.

To ensure that the heat does not dissipate, you need to properly insulate the room. As a thermal insulation material, it is recommended to use expanded polystyrene, which is covered with foil on both sides.

For fixing the film to the ceiling, it is best to use refractory plugs

The installation is carried out in the following order:

1. First, fix the thermal insulation rolls. They need to attach the joint to the joint. To fix the material, use dowels. It is recommended to give preference to plastic refractory dowels.
2. Remove the slots with foil tape.
3. Attach the film to the layer of thermal insulation material.
4. Connect the thermo film strictly in parallel. To do this, you need to connect to the copper buses special terminals, which, in turn, should be tightly clamped with pliers.
5. In the place where the thermostat will be connected, make a wall in the wall.
6. Place the wire in a corrugated tube.
7. Place the temperature sensor in the corrugated pipe. It must be fixed strictly under the heating film. Use scotch tape to fix it.
8. Check the operation of the structure.

What is better to install: a heated floor or a ceiling

Is it better to install a warm floor or a warm ceiling?The answer to this question is clearly impossible, because there are a number of nuances. The advantages of a warm ceiling include the possibility of installing heating elements over a specific section of the room. Do the same method with the floor will not work.

An essential advantage of the warm floor is the uniform distribution of the thermal air mass.

In order for the heating system on the ceiling to work well, you need to take care of the quality of the thermal insulation

. For example, you can heat the floor to a certain temperature in 20-30 minutes, and then reduce power, and switch to a more economicalmode.

The disadvantage of a warm floor is:

• The complexity of installation.
• Need for waterproofing.
• Increased power consumption.

Warm ceiling or heated floor vice versa( video)

The warm ceiling has many advantages. Such a system is an excellent alternative to all kinds of heaters. Warm water ceilings have high performance characteristics and are absolutely harmless to humans, so they can be installed even in the children's room. If you decide to use this heating system, pre-level the surface of the ceiling and install a thermal insulation layer. Otherwise, the heat will dissipate.