Installation of drywall on the ceiling with your own hands video: installation and technology, repair instructions, plaster in sheets, photo dismantling, apartment layout

Drywall can be mounted on any surface Many people prefer to install a drywall ceiling themselves. To make a ceiling with this material is quite simple. It is enough to follow the instructions and pick up high-quality materials. Mount gipsokartonnye sheets can be on a wooden or metal frame. Each technology has a number of its features. The basis of gypsum board material is cardboard, and filler - gypsum.

Installation of gypsum plasterboardit on the wooden ceiling

Wooden ceiling will serve as a framework for plasterboard

Installing drywall to wood ceiling can be done without the use of frames. Attach sheets to the ceiling with your own hands is easy. It is worth noting that it is impossible to trim the ceiling with gypsum boards without the use of a frame if the surface is uneven.

Installation of plasterboard without a frame is performed in the following sequence:

1. First, mark the place where the gypsum board is fastened on the ceiling.
2. Attach the sheet to the ceiling, and drill 8 slots into the surface.
3. Insert the dowels into the holes.
4. Glue a piece of foam rubber to the sheet.
5. Attach the plasterboard to the ceiling, and screw it with screws. Do not forget to put the washers on it beforehand.
6. Back from the screw 3-4 mm and drill a hole 5-6 centimeters in diameter.
7. Fill the hole with a mounting foam.
8. Fix all the
9. sheets in the same way. After the foam has dried, remove the screws.
10. Sew holes.

You can also mount a drywall sheet to the ceiling using mastic. Remember that when using this method, you need to clean the ceiling of dirt and apply a primer to the surface.

Drywall installation technology for single-level ceiling

Single-level ceiling - economical option for your room

If you started a major overhaul and do not want to spend a lot of money on the ceiling finish, a single-level ceiling made of drywall is whatyou need. You can make this design alone. Before installing the plasterboard ceiling, you need to clean the surface of dirt and dust.

Before work, you need to check the level of the ceiling. If the surface is relatively flat, you need to put a grid on it. It will help you easier to navigate when installing the frame.

How to install a single-level ceiling:

• Attach hanging brackets to the intersection of the marking line. To do this, use a puncher and dowels.
• After this, attach the U-profile to the wall. You can do this with dowels. Do not forget to drill a hole in the wall before installing the profile.
• Use the self-tapping screws to attach the guide profiles.
• Check the quality of the received frame.
• If the skeleton is made correctly, proceed to the skin of the structure.
• Attach the sheets of plasterboard to the frame. Fix them with self-tapping screws. Implement this procedure alone is difficult, so use specialized clamps.
• After you have finished the construction, apply the putty on the drywall. Do not forget to eliminate all microroughness.

Repair of gypsum board ceiling with own hands

It often happens that the plasterboard ceilings are deformed during operation. This can happen if you use it improperly. The cause of the deformation of the canvas may be a flood.

Before proceeding with the repair of the structure, make sure that the frame is securely installed. If it has also been deformed, it should be strengthened or replaced by defective elements. In some cases, it is advisable to dismantle the entire structure.

Instructions for the removal of cracks in the plasterboard ceiling:

1. First you need to extend the crack with a hacksaw. As a result of this operation, you should get a depression with a triangular section.
2. After this, apply a non-crack primer.
3. Next, you need to wait for the primer to dry.
4. Then apply the first layer of putty on the seam. When it dries, apply a second one.
5. Use a fine-grained sandpaper to grind the seam.

Sequence of ceiling repair after the flood:

• First you need to remove the finish from the surface of the sheets.
• Next, remove the drywall sheets that are deformed under the influence of moisture.
• The room needs to be ventilated. This operation will eliminate moisture residues.
• Next, you need to install new gipsokartonnye sheets on the frame.

Installation of a two-level gypsum board ceiling: step by step instruction

The two- and three-level ceiling will look very nice. With such a ceiling, you can come up with interesting lighting

Two-level ceiling looks in the interior of the apartments is very extraordinary and futuristic. It's not easy to install a multi-level ceiling from gypsum board. First you need to clean the ceilings from dirt and eliminate irregularities.

Before starting work, be sure to prepare the fixtures. Also do not forget to draw a scheme of construction and make a marking of the ceiling. During the markup, note that between the levels will be located lamps.

Installation of the two-level ceiling is carried out in the following order:

1. Attach the main UD profile to the walls. The fixing step is 30-35 centimeters.
2. Secure intermediate CD profiles. Connect them together with self-tapping screws.
3. Install the suspension. They are needed to install the next levels. Attach them to the main frame using self-tapping screws.
4. Raise the CD profiles.
5. Pull the line across the auxiliary frame.
6. Set auxiliary profiles.
7. Secure the auxiliary profiles with self-tapping screws.
8. Fasten the sheets of plasterboard to the first level. To fix the drywall, use self-tapping screws. Do not forget to pre-post.
9. Set the plasterboard sheets to the second level.
10. After you are finished with the plating, install the fixtures and proceed to the finish finish.

Installation scheme for drywall on concrete ceiling

In the picture you will see the materials used to fix the drywall

In order to install drywall on a concrete ceiling, you need, first of all, to purchase the necessary materials. You will need a plaster board with a thickness of 9-12 millimeters, bearing a profile, screws, suspensions, dowel, wedges. Also, before starting the installation, calculate the perimeter of the ceiling.

Before starting work, do not forget to make the holes for the lighting fixtures. In addition, you need to take care of the wiring in advance. After the end of the work, it is necessary to apply the putty on the joints of the gypsum boards.

Scheme for installing drywall on a concrete ceiling:

• First you need to fix on the perimeter of the surface of the UD-bar.
• Then use the hangers to secure the CD-strips.
• Install the main and auxiliary ceiling profiles. In the end, you should get a dense crate.
• Attach the gypsum boards to the frame. For fixation it is desirable to use self-tapping screws. During the carcass plating, try to join the sheets neatly.
• Strip all joints of the structure using an emery cloth.

Installation of drywall on the ceiling with their own hands( video)

Prices for installation of plasterboard ceiling in the city of Ilyichevsk - 100-120 hryvnia per square meter. In larger cities, for example, in Kiev - the price starts from 150 hryvnia. That's why it makes sense to make the installation yourself. Mount gipsokartonnye ceilings yourself is not difficult. The main thing is to make a strong frame and clean the surface of the main ceiling from dirt.

Installation of drywall on the ceiling with his hands( photo)