There are a large number of attributes in the living room that complement it and create a general view of the room. The cornice on which the curtains are attached does not always fit into the interior design. To help you come a niche made according to the original design. It is able to hide the bar of the cornice, hooks, rings and other fastenings for curtains from prying eyes. It's practical and convenient. You can create the impression of a descending curtain from the ceiling itself. Manufacture niches are usually made of plasterboard. This material has all the necessary qualities for erecting a niche of any complexity.
- Why do you need a gypsum boardboard under the cornice
- How to fix the cornice to the drywall
- How to make a niche for curtains made of plasterboard with your own hands
- Mounting features: concealed cornice for curtains of plasterboard
- How to mount a niche from plasterboard for curtains( video)
- Installation of a niche from plasterboard for curtains( photo process)
Why a niche of plaster is neededOkhotona under the cornice
If in your room beautiful wallpapers are glued, there are plastic double-glazed windows, suitable curtains hang, in this case it is worthwhile to think about a niche from gypsum board. The curtain itself looks beautiful, but the tire can spoil all its appearance. Therefore, niches for the decoration of premises were invented.
Do not use the wallpaper to hide plastic cornices. This option does not always look good. Usually it looks ridiculous and rude.
With a niche, you can hide the cornice, to which the curtains are hung for rings or hooks. And to do it beautifully and correctly. If the room has stretch glossy ceilings, the niche is able to hide the entire design of the curtains, and it will not be reflected in them.
A gypsum boardboard niche can perform two functions:
Niche is used to mask wires if you have electric blinds. In this case, you can hide everything under the box. The block with the mechanism will look ugly if it is not hidden.
Instruction: how to fix the cornice to the drywall
You have previously made ceiling plasterboard ceilings, and now you decide to hang curtains. It is necessary to fix the cornice to the plasterboard correctly and qualitatively, so as not to damage the ceiling. You can fix the cornice yourself, following the installation instructions.
Initially, it is necessary to look and see how to properly mount the mount. In advance, attach the wooden beam to the ceiling, where the future cornice will be located before installing the drywall sheets on the ceiling.
Instead of a wooden beam, you can use a metal profile to mount the cornice on the plasterboard ceiling.
Then fix it with screws or screws. If the sheet is already installed, but the position of the cornice is not the same as the profile, there are ways to fix the cornice without damaging the surface of the drywall.
The cornices are fixed to a wall or ceiling. There is no difference in mounting between these two methods. Only one is fixed to the wall, and others to the ceiling.
For mounting the eaves on the ceiling, an additional fastening between it and the sheets of gypsum board should be used.
We are about to install. To do this you will need the following:
- Rotary hammer;
- Safety goggles and gloves;
- Construction roulette and level;
- Screwdrivers, pliers;
- Dowels for plasterboard( and several pieces of butterfly type);
- Pencil and square.
If you plan to hang heavy curtains on this cornice, it is worthwhile to use reliable anchor bolts for installation.
First we make a markup on the above window for 10-15 cm. Draw a straight line using the building level and rulers. We put labels on both sides of the window - the place where we will mount the brackets. Securely fasten the brackets. After we hang the cornice.
How to make a niche for curtains from plasterboard with your own hands
Getting started, you first need to determine the size of the niche. Determine its width and depth, position relative to the planes. We make labels. We beat off the cute thread with two strips on the walls and one on the ceiling. Indentation should be at least twenty centimeters. On this marking, we mount metal profiles( guides).To do this, use screws and plastic dowels.
At the second stage we fix the ceiling elements of the frame. We insert inside the guide profile. We fix it with hangers on the outer board. We fasten with self-tapping screws. On the line, which was previously recaptured by a thread, we drill holes. In them we insert dowels. Suspension is fixed on them, and one more profile is installed.
We screw the strip of gypsum board with screws, passing through the elements of the frame.
In advance it is necessary to make grooves on the plaster at the place of fixing the vertical sections of the guide profile.
We assemble the base of the vertical wall of our niche:
- We take the base;
- On it we fasten a band of plasterboard;
- We connect by means of the sides the ceiling profile and the guide.
The ends of the guide must protrude beyond the ends of the profile by at least twenty centimeters.
After we collect the niche wall. We install the wall of a niche on a gypsum board platform.
At the very end we do the finishing work. Shpaklyuem corners, the place of fixation.
Mounting features: concealed cornice for curtains from plasterboard
Concealed cornices are necessary to create a harmonious appearance of the premises. Such a cornice is suitable for rooms with stretch ceilings. In this case, it is not possible to use ordinary cornices.
The work of installing a hidden cornice proceeds in several stages. First, a corner is fixed on the concrete slab of the ceiling at a distance of twenty centimeters from the wall where the window is located. After the wooden joist is installed along the entire length. We mark the middle on the timber and fix the wall baguette. We find the center of the niche and mount the cornice in this place.
This type of molding should be:
- The right size.
The hidden cornice has no decorative properties. He must withstand the weight of the curtains, ensure the mobility of rings or hooks.
How to fix the curtain on the plasterboard with your own hands
Many people use plasterboard for wall finishing. But on the walls we periodically broadcast different things: shelves, cabinets, decorative panels and curtains. It is necessary to fasten objects to such walls correctly, considering all the nuances of the finishing material.
For securing curtains to gypsum board walls you will need tools:
- Construction tape measure and level;
With all these tools you can install the curtain yourself with a few minutes.
Let's get to work. First, we make labels where the curtain itself will be located.
The main thing is that the cornice does not interfere with the opening of windows. To do this, place it at a distance of 15 cm from the window.
Draw a flat horizontal line. Fasten the brackets at the same level from the window on the plasterboard wall. The curtain itself is mounted on the anchor bolts. In advance, you need to make holes in the plasterboard skin for them.
How to mount a niche from plasterboard for curtains( video)
Niches for curtains from plasterboard in the form of a box are often found in different rooms. Such a decorative element in the interior is able to hide the structure by which the curtains are attached and moved around the curtain. Niches perform a large number of functions. You can install the niche correctly with your own hands, if you follow the instructions during the work.