Very often in our life there are situations when the bathroom needs to make a special, urgent repair, associated with the adhesive device itself. But far from everyone knows what can be used in such a situation. Most often this problem occurs because of non-accurate operation, and referring to practice, you can see that even if you sharply lower the seat cover, then you involuntarily damage the device itself. And although the toilet is of sufficient strength, it is much easier to damage than you could imagine.
- How to seal the toilet: the main causes of chips
- How to glue the ceramic: toilet bowl and installations of other materials
- Cracked tank: how to seal and how
- We select glue: how to seal the crack in the toilet
- How to glue the toilet bowl( video)
How to seal the toilet: the main causes of chips
Despite the fact that the appliances of faience and porcelain are hard, they are still classified as fragile materials. So, for example, with such damages as point or mechanical on a porcelain or faience surface, cracks may appear. As for porcelain, it can split into several parts. In these situations, a question arises. What will glue the toilet?
Violation of the integrity of the toilet is due to the following 3 reasons:
- Because of the impact of a solid object;
- Due to a sharp temperature drop;
- The correct installation was not carried out.
So, for example, if something regularly falls on the barrel, then there is a high probability that soon you will see a crack on it.
Cracks in the toilet are mainly due to the fact that poured hot water into it. Therefore, the next time you need to think carefully about the integrity of the device before pouring boiling water.
During installation of the device in a new location or in case of replacing the old one with a new one, all installation rules and a clear sequence of actions must be observed. Modern devices assume to carry out installation not only on bolts, but also on glue or liquid nails. If you are using bolts, then the tightening should be uniform, so as not to create stresses. We must immediately say that in the case of improper attachment, the crack does not appear immediately, but only after a while. If you use glue or liquid nails, then pay attention to the correctness of the glue composition before fixing.
Than to glue ceramic: a toilet bowl and installations from other materials
From what do the toilet bowls?This question appears when the device needs repair, because in a modern comfortable house you can not do without this installation. If you believe the statistics, then taking into account certain conditions, the device is used every 6-7 minutes.
If to take into account these circumstances, the toilet bowls are made of:
From the toilet, they require not only mechanical strength, but also the ability to transfer chemical effects. Speaking about devices that use ceramics, we can say that they are not only the most popular, but also the best among other products.
Ceramic devices are considered the most common, and their versatile parameters allow you to position and attach the toilet bowl without any problems.
At the moment, people have a huge experience in installing and repairing toilets, but as practice shows, if the installation is carried out correctly, then there is no further operation. This is what leads to both partial and complete destruction of products.
Cracked tank: how to seal and how
Before you do repair the toilet, you need to take care of the secure attachment of the seat or to remove it. All repair work is in 3 steps.
- Surface preparation. This step is carried out in any case, regardless of what, your device is manufactured. The surface must be degreased, cleaned. As a material, sandpaper with fine coating can be used. After that, the surface is wiped with a soft cloth that is soaked in acetone or gasoline.
- Working with the seam. Here the sequence of actions is determined depending on the type of glue. But basically it is applied to the required site, waiting for a certain time to get good adhesion and connecting the parts. For the result to be strong, all the details must be well pressed against each other.
- Shutdown. It is very important to press the parts exactly the time that will be indicated by the manufacturer of the glue on the package. After the glue dries and takes a little time, the surface is treated with sandpaper.
At the moment, at special points with building materials, you can buy adhesives that are able to glue any surface. Despite the fact that the choice is huge, the consistency for repairing the toilet can be prepared by hand. Experts do not recommend using self-propelled substances, it is better to purchase factory ones, this will give a guarantee on the reliability of repair.
Before engaging in bonding a crack, you need to prepare the following materials:
- Fine sandpaper;
- Thin spatula;
- Soft cloth;
- Hair dryer( can be used for hair).
The work is quite painstaking and requires carefulness and appropriate preparation. Preview the training videos in advance, how to repair the chip on your toilet.
We select the glue: how to seal the crack in the toilet
Based on the practice, we can say that the nails can be reliably covered up with a hole or the ceramic sink can be repaired. The drain tank is glued according to the same technology as described above. If your device is made of earthenware or porcelain, then it is better to purchase the finished product in a special store. To these ready-made compositions it is possible to carry BF-2 glue. Butyralphenol adhesive differs by its numerical values, for example, indicator 6 means that the elasticity is increased and for the toilet, this composition is not suitable.
In order to repair the toilet the epoxy resin perfectly suits, it safely glues all the chips and cracks, but not everyone will find it convenient to work with it. It is best to purchase the adhesive composition "Unicum" or "Rapid".These tools are able to glue any toilet seat.
Any master in this process relies solely on the personal experience and advice that others give to him. Very often the adhesive composition has to be prepared independently, using individual components. So, for example, the duromed seat is perfectly glued together with nails, since the duroplast is well repairable, and as for the tank that has burst or is broken, this glue will not work.
The barrel cover can be sealed with liquid nails, but for a global restoration of the plant, such a composition will not work.
But as for glue based on liquid nails, this will be an ideal option. Here you can add chalk, quicklime or wallpaper paste. This consistency is grasped very quickly, it must be prepared immediately before application. After the composition is applied, it must be removed immediately with a soft cloth.
How to glue the toilet( video)
Cracks and chips on the toilet occur quite often. No one is insured against this type of problem. If you only cracked the seat, it's easier to replace it, but it's better to glue the toilet bowl and it will last a certain time. However, remember that the device that was restored, will no longer have the strength as before, and after a while you will have to purchase a new one.